@NewGuy :hah ! ok ! because i dunno the average temperature yet.. hahh !

@Tryx : good ma.. kasi orang tapao...haha... i have to train my endurance in resisting the temptation to race.. XD

@Kai : ur bike more power ar now..? i wan to test.. haha.... but not this few days... a bit busy... i everyday fetch sis.. her car tak mari lagi..

kai

boleh powder than LC mia ...  kena ada fomula  ....  hehe .....
haizz ... semalam i tertidur ..  shyan nak pergi genting

now i ajak dia .. dia tak layan sama wa ... kesian ayam ... nth to do , nowea to go now

the picture i downloaded cannot see the brand of that bike.. but still nice.. haha...

thianz FZ cam

me high cam but x the super high cam (just found out CMS profile lebih kurang ride-it profile lebih kurang Yamaha S6 profile ) for LC cam

no prob here,
1) EO leak x enuf due to your leak (gas rosak/keras) or low will have sound...(check EO level, repair leak 1st)
2) pomen put the teppet gap too tight, mine set in 10, out 15 (if pomen x 1 set)
3) EO i still using 20w/50 so sure no sound (use this EO will reduce the sound)
4) the above kenot settle look for pomen will to do...

mineral +/- 1600km not more than 2000km (feel your engine) this i tested d
semi between +/- 2500 (feel your engine) this refer other version guideline
fully between +/- 3500 (feel your engine) this refer other version guideline

Found another way to make lc-es 5speed increase top speed , using 125ZR rear sport rim.Ori Enkei rim dam heavy.

ya, ori rim more stable but very heavy.

tepet cannot too tight or too loose if possible set cun cun than will eliminate the tek tek tek sound but not all cam can set sui sui must leave some clearance. if not possible set cun cun better set it loose abit. too tight can kill the valves if worst  piston and valves crash. than kaboom liao the engine and the block. better seek foreman opinion. because them who set ur engine. they know it better.

wide rim and big tire is stable but you ll lose some top...

this some info i got

1.85 max recommended 100/80

2.15 recommended for 110/70

Stock LC ES 2011 is 2.5 use 100/70 (pomen say track tire size)

Since now got this size, then I ll try later bcos sure lighter than 100/80 and lower.....  

@kai 

pakai motul 3100 ...... whn u sampai 800km++  u will feel lain dah ...

@melvin

since tht rim so heavy .... i suggest u buka and keep tht valueble rim 1st .. go get a pair of 125z rim on mudah or RB  yang boleh masuk disc

enkei 3 , 6 batang .... depan 1.6 , belakang 1.85 ....  3 batang is ringan than 6 batang  ....  but panas oh .. after u pasang 3 batang ...

@kun @ tryx

tis morning .. i do some magic on my rear brake .. now damn makan adi ... i like it .... 

yup ... not gooding rasa .... 

3100 cheap keh ? rm29-30 right ?

fuyoh ... damn murah ... we here sell 27-30 ni ... but going to naik harga again .. soon 

btw.. i want buy ori block.. u got a lot of ori block right?
or.. if possible just wanna buy piston+piston ring parts only..
since my bike prob is at that area..

@kai - yup... that TT jaya shop.. the foremen hand really got something wrong.. especially when u want repair/press ur fork..
im one of the victim.. same with my friend..

---

Added on July 26, 2011, 12:19 amyup.. that the possibility now.. already change clutch plates.. but the prob still occur.. now target change piston ring..

shop tauke selling RB stuff also, but he didnt ask me throw pun.. he said, if u want cantik2 besar2 mia, then go for RB.
if u need performance mia, go for nissin or brembo. normal use mia go for yteq enough.

and pomen must be patient.. although is cheaper stuff, but he also try his best to get optimum braking for customer...

that is the tauke..
didnt pushing people to buy expnsive stuff.
just sell what suitable for customer..

sudah ada 2 malay worker kat sana.. kalo tak silap..

itu malay worker betul2 baik, apa pun boleh dibawa bincang.

next TT location no idea leh...

lu org mau pie mana tempat?