Hi.. have not hear from you since last email in February.

Just cartridges alone for T10 is 3/4 size version right now

PVC ink? As in for PVC ID cards? Normally using Dye or Pigment ink.. If your contact is giving you solvent ink.. better take real good care of your printer

email me if your fee

Hi... Thanks for your interest. Stock ready for immediate delivery for this model.

Promotion price PM to you

Yes.. have in stock for you.

As per your request

Hi,

In my experience, for low to mid range printers;

Epson = Performance & Quality
Brother = Simplest to install
Canon = Expensive in the long run due to the Ori Carts dying (E5 Error)

Your MP160 can be CISS since you already bought it. Just know "E5" can strike anytime.

1. Please fine tune the ink tube installation/position for smooth prtinhead movement.

2. Little is normal, I made sure that the system was optional before sending it to you.

Hi,

If you need waterproof prints, you will need a Pigment ink System/Printer.

The only full spectrum Pigment ink printer in the market is Epson.

What kind of printer budget do you have in mind?

I believe that there has been a lot of misunderstanding on your requirements.

FYI - OHP "inkjet" transparency film is required for your needs. For that, depending on the media used, normal ink is possible and cheaper. Waterpoof ink does not guarantee that it can 'stick' on Normal OHP transparency film.

Epson T10 is a handy budget workhorse for easy use.

Waste ink Tank - It's CISS independent.
* It's NOT connected to the printer cartridge - it's a tube connected after the pump below the printhead.
* Any kind of container can be used - sponge or not
* All printers can be modified accordingly if the uses desires it. It's NOT a necessary/compulsory mod.
* I would advise on modding only after the Printer warranty has run out. As it does not serve any critical function.
* Epson TX100 is the fastest to MOD if you just have to have it.




HP60 - Sorry I don't have this yet.



HP20/49 - Sorry I don't have this yet.



This post has been edited by ezCISS: Jul 13 2009, 10:14 PM

NOT compulsory, because the built in pad is more then sufficient.

What you say is true, eventually the pad at the bottom of the printer will get saturate. But your jumping the gun here.
* That's the original purpose, the waste pad under the printer is HUGE.. it's meant for large storage over time.
* New printer = under warranty. Let them solve it if it does happen within the warranty period.
* This MOD can void your printer warranty.
* It does not get "Full" that fast lah.. depends to user, some in 2 or 3 years time only.
* Again, depending on user, for some odd reason the printer may Kaput even before it gets 'Full'
* If is does get "Full", then address it when the time comes. If not broken, don't fix it lah
* Once u MOD, you got to keep emptying that bottle. More troublesome and extremely easy to accidently banjir your table.
* Finally.. MOD or not.. does not affect your printing output.

From my experience, the benefits of the MOD does not outweigh the hassle caused. Lagi pening just to keep things clean "inside".

FYI - I have that mod and info is on my webby online years ago. Using it too. (heck my printer is 4 years old now since before V1 bulk)

Sublimation Ink = Heat Press products. NOT for end user printing.

Normal
Waterproof
Heat Press Transfer



Most welcome. Those 6 colour printer models are worth the investment. Fantastic print quality and speeds.

Canon MP145 -> Please see HERE before deciding.

IF you haven't bought the AIO yet, a better 'Plug and Print' printer for System use -> Brother or Epson

R230/R290 is a popular 6 colour printer. T60 is the latest 6 colour model from Epson. Currently, T50 CISS has been release, expecting T60 CISS to follow soon after.

HP21/22 Refill Cartridges might arrive in next shipment.

I specialize in CISS and refill inks. Sorry I don't sell printers as;
- Printer price is quite standard everywhere.
- Shipping of the printer unit will increase the printer price to you.
- Printer warranty claim will be easier from the shop nearest to you.



Thanks and Noted.

Thanks for the clarification via PM. I await your kind order confirmation

I sell - Dye, Pigment and Sublimation Inks. When placing order, please advise on your printer model for correct pairing.

Sublimation Ink - Heat Press Printing : NOT for end user normal printing.

Will PM you immediately once the new shipment arrives

As per your request.


----------------------

V28 Bulk shipment closing tomorrow. Please reconfirm your orders ASAP. Thank You

Thanks for the update and feedback. Happy Printing

1. Pigment ink has more 'impact' BUT cost more. You can alternate once ink runs out. Recommend using Pigment printers with Pigment ink. Use Dye printer with Pigment Ink only if you know what your doing.

2. TX700 ezCISS can be ordered , T60 Chip still in R&D. R290 ezCISS stock ready and proven stable.

3. Epson R1800 needs to be special ordered from Epson. Estimating within RM2K range. It will not be cheap or easy to find the 8 colour refill ink locally. R1800 ezCISS can be ordered for you is you wish.

R1390 is RM1.2K range, best 6 colour printer in the market. The printer is a whopping 11kg! Many of my graphic design customers are using it. ezCISS for R1390 Stock ready.

Canon iX4000 / 5000 is only a 4 colour printer. Graphics resolution and quality is lower compared.

Stock ready, As per your request.

This post has been edited by ezCISS: Jul 24 2009, 03:25 PM

iP4680 ezCISS with Auto Rest Chip will be arriving in V28 shipment.

Advise to use Dye ink as the iP4680 is a dye printer.