QUOTE(fariezz @ Oct 17 2011, 02:23 PM)
when blue led flashed, press vol-. can u go to bootmenu?
Yes. Still can.
QUOTE(yweising @ Oct 17 2011, 02:24 PM)
looks like u need to reflash full sbf

I tried. Used the guide from the first post in this thread. I highlighted the steps where I faced problems.
3. Erase Data and Cache [MUST DO! SERIOUSLY, YOU MUST DO THIS!]
- Turn of your phone,
- Press and hold Power+Vol.down until android logo appears
- If you previously on Eclair, press right bottom corner of the screen to get the menu
- If you previously on other Froyo build, press Vol.up+Vol.Down simultaneously to get the menu
- Navigation button: Vol.up and Vol.down | Action button: Eclair, use the touchscreen. For Froyo, use power button.
- Do Wipe Data, wait until it's done
- Then Do Wipe Cache, wait until it's done
- Choose Reboot system, BUT IMMEDIATELY JUST AFTER YOU choose reboot, press and HOLD Vol.Up for 5 seconds and release
- You are now on bootloader
<<-- How do I know I'm on the bootloader?4. Flashing the SBF File to Your Device:
- Open RSD Lite 4.9 from your computer desktop shortcut, then click browse button [...] to open the SBF file
downloaded files usually is .7z or .rar, PLEASE extract it first to open
if your computer can't open SBF files, try to shorten the SBF filename, and don't put it on folder, try put it on outside like D:\ or E:\
- Connect USB cable to your device, if it's the first time to flash SBF file, WAIT untill all the drivers properly configured
<<-- RSD Lite never detect my Defy no matter how long or how many times i re-insert my Defy- In RSD Lite 4.9 window will recognize your device, it will says connected. If don't, try to pull cable and plug it again until it's connected.
- Click Start button, wait the process, it takes 7-10 minutes
- When all is done and ready, RSD Lite status will shows "Finished" and Result="PASS"
- You are on official South East Asia Froyo 2.2.2!!