Use a fast running tap.. Put the filter under the running water and run the water through it..
dunno yet.. Have to wait keputusan from police..
U can run but u cant hide.. 
Now  the world car care there cannot bring own lube ady.. Sad..
Owh ok.. That means 2 filter for u now lah is it?
Rally lah.. Riot apa.. Riot means i bring weapons go there spill some blood ady..
500-700, there is only 1 car u can buy, Proton Tiara is non running condition .

I am quite sure I have made up my mind to get the Persona M-Line 1.6 Manual.
Any owners here that can tell me how their experience was with the car??

Oh,
Iswara not bad mar..

Nobody drives a 1.6M line MT?
I just booked my unit.
I liked the test drive. But i would like to hear some feedback from plp who have been driving it for a while..

Hi.I

i'm kinda confuse..is it true proton cars now got interest rate 2.8~2.9%?

I'm keen to book auto b-line. Got RM 1k oso.

I test drive auto M- line but feel more luv it.

Now kinda stuck on budget for 500~550 only for car..

Damn fark wei... I wonder is my PE fuel tank problem or the pump problem..
I just had my car over pumped with fuel, and wasted almost 500ml of precious fuel... as usual leave the pump nozzle in auto mod then carry on with cleaning up my wind screen and back screen, mana tahu, fuel start splashing out of the tank...

Light mods lor.. Exhaust, LCP, air filter, high cam, adjustable cam pulley.. Total gains from the mods that I mentioned can give around 30-40+ WHP boost..

That's what I love so much about the E46 M3.. With some light tunings and exhaust mods easily reach 400+ WHP.. And best of all it's an NA engine, so u know it's reliable..

High cam is specially made camshaft that can increase the valve lift.. So u get more air and fuel into the combustion chamber.. Improving high RPM power by a lot..

i drive h-line crusing at lekas highway too, but top speed only up to 180km.

---

Added on July 11, 2011, 4:37 pm

since the highcam design for high rev, how to solve the low end power which PE facing at this moment?

Good lor.. I have faith in works stuff...
High cam? High profile camshafts to be exact.. The camshafts in our engine are designed optimally for smooth idling, smooth power delivery & low emission & FC.. The high profile camshafts are designed with a higher-degree lobe to advance/retard the inlet/exhaust valve opening, but ur car's idling will be quite rough and FC will be slightly higher. Yet by doing this u get around 15-30 HP gain depending on ur adjustable cam pulley tunings, piggyback/standalone ECU tuning and ur engine's original capacity..
Mine 5 ppl in the car bantai 200 KM/h nia But when wan slow down damn scary lo..

Depending on the torque band that u prefer, u can mess around a bit with the exhaust setups. Get the swirling bullet with hotbits extractor, u'll never regret it & ur low end torque band changes tremendously.. LCP helps, air filter helps from 3k RPM onwards, or u can go straight for Cold Air Intake. Carbon air intake will help as well, but this requires the dismantling of ur original airbox and replacing it with a open-pod air filter, as well as building a heat shield around it. This works very well to improve low end torque, but high end ur car will suffer kaw kaw..

Once I used the wrong setup (wrong bullets & extractor) on my PE's exhaust system, I went to Duke, press till habis my top speed 160 only. Low end power cannot be felt at all. So it was practically useless, that setup. My car's idling became very bad during cold start due to improper placement of O2sensor, and it scared the shit out of me a couple of time when I step on the accelerator pedal & there's no response. This is because the O2Sensor works with the presence of heat & exhaust gas, and so the exhaust shop fella placed the sensor AFTER the flexipipe (a.K.a nenas), causing the O2sensor to not be able to get any readings during cold start & wet weather because the flexipipe sort of insulated/separated the heat from the extractor & the sensor.

What I did was I revamped the whole exhaust system, chunked away the cap ayam extractor, plonked in a Hotbits' extractor with the O2sensor at the intersection of the 2nd & 3rd pipe, a swirling bullet, and a midbox. Tested the power after that, damn impressed. Then I replaced the original muffler with an aftermarket S-flow, been happy with the power ever since till it's now passed into Zeng's car.

Nope.. Stock also my top speed 205.. Depends whether ur balls is made of steel, titanium or platinum.. Max I go 215 nia.. With a bit more mods can push it to 230 I'm very sure, but enough la.. Now I'm a sane driver, everyday max speed 110 nia..

---

Added on July 11, 2011, 5:08 pm
Who said my setup is for manual? & my car is auto as well..

---

Added on July 11, 2011, 5:12 pmNot only silent.. It's practically 'noise-less'... Until Zeng got so bored with the silence that he's planning to get rid of my once beloved 5Zigen muffler..

So Xan, which 1 better to go for first?

LCP = bout RM600
Full exhaust = Hotbits + Bullet + Midbox + S-FLow muffler bout RM 1100

by the way, yr full exhaust system is plus installation?

Nosebleed..

Thanks for the explanation. 
5hours with the a/c is on..

Yup. No choice..
To many mosquito already..
Even sleeping inside the car also got few mosquito came in and visit me.. 
I think gonna to service my car 5k earlier.. Just travel 5k only with fully..
Should I?

Luckily I still alive.. 
Oh that type.. why I din think about that one.. 
I servicing my car but not at SC..
I do my service outside ba.. since my warranty going to end soon 

Lol.. where to get it?
I wanna buy one spare inside my car 

U lick back ur body?
At various hypermarket lah...Ridsect, Shieldtox.

Kk.. Will check it out later..
I don't think got chick will follow me 
I just wanna prepare for my next event at Stadium Bukit Jalil..
Some concert going on there on 22 July-24 July

Give them free and ask for contact 
I'm working as live sound engineer

Mozguard. Can get from Guardian. There are several cheaper local brands but I use the more expensive one coz our skin has to take care, use good wan...UK branded. Good for mosquitos, sandfly, etc..

However I only use that when going on hiking or beach. Wanted to sleep comfortably, not going to spray that on me....

For passive usage, like sleeping use those stick on sticker type wan...the smell will drive mosquito away...if one not enuf, stick few more pieces around your body...at least body won't feel sticky. Guardian also got sell. 10 strips per box.

Waa.. so many type.. lol..
Thanks for the recommendation. 
This is my part time job only.. 
Anyway, I study sound and music at LKW

my PE also produce a loud sound when on aircond 

@ fubar..exactly. when i service and made complaint about the noise, the SA said its a DISTINCTIVE SOUND for PE 

those who got sound try install VS + GC see it helps or not.

Initially I also tot the bosch brake pad sucks big time. Then after it settled in after a few hundred km, its turns out to be ok for normal avg non rev driver.

Those used to 500C brake pad will feel brake pad tak makan langsung, but those used to standard 300C brake pad, the Bosch provides similar performance. Braking not too makan but it quite suited me somehow. Unlike the more makan brake pad, I doubt this brake pad is going to makan the disc plate, so usually no skimming needed even after long time.

Honda City original nissin brake pad provide exactly the same feel.

HOWEVER there are 2 cialat issue with this bosch pad...

1. Produced brake dust like nobody business. Those who like black rim, no need to change rim wan, leave it a couple of weeks, garanteed black as hell...only no shiny.

2. Noise...this brake pad was main suspect in lots of noise issue like creaking when start/stop, turning wheel while idle, etc. Not acceptable. So..if it turns out the brake pad is one of the cause of the darn irritating loud noises...it just have to go.

Anyway, still have lots of brake dust. However, after using ONR to clean the rims found out that the dust don't stick
too much on the rims. Previously, after 1 week the rims will be dark colour already.

soft lk super spongebob...more dirty thn dirty harry...3 days after wash already dirty . Only use to work n bec. after 1 week looks lk my whole rim has been painted black.

will install UR front strut bar 3 point on tis saturday

Waja got rear disc brake no abs I don't mind the price slightly higher.. Cos if u think about it, our B/M-line front disc brakes are actually not enough. Sylphy, Vios & all this even though dont have rear disc brake but it's sufficient to deliver adequate stopping power. Our PE using Saga's brake system for B/M-line, which was designed & made to stop a car that's 900-1000 KGs. Our car itself 1250 KGs already. Definitely not enough lo.

http://forum.lowyat.net/topic/1833931
this possible to spray for the side mirror that have no color for B-line people perhaps??

---

Added on July 13, 2011, 12:30 am
GF and wife materialassumption is u might think this girl is perfect to be together for the rest of life XD

hi, guys.

i got some question to ask. izzit normal that the petrol symbol light up before the needle touch the E? after i saw the light, i straight go pump petrol and pump till full tank.. rm64 sudah full tank..