1.1-2.2 = correct
2.3 = if you wanna flash back, use your CMW to recover.

i backed up my rom using CMW and restored using CMW. now running Litening 2.1 everything works fine!!

Hi all Sifus,

i am using Litening 2.1. after fully charged, the phone was untouched for whole night with wifi, gps, 3g on. the battery result goes here. i was wondering why the google maps is running so high % since i didnt run it. could it be the latitude apps i set that auto syncing for whole night? other then that i am satisfied with this rom..

thanks.


Attached thumbnail(s)

Hi Jer,

i am using litening 2.1 too. but the battery not as gd as yours..


Attached thumbnail(s)

Mine, 8hrs on idling = -12% btty.
Jer's, 4hrs on idling = -1% btty.

i can see the phone awakes itself when idling, probably caused by the Maps.. any idea? thanks.

This post has been edited by AstonCheah: Jul 13 2011, 05:39 PM

yes, i bought it at RM119+RM6(shipping) on = www.MoreSales.com.my. recommended by Uncle Benny..

This post has been edited by AstonCheah: Jul 14 2011, 09:26 AM

[quote=ventrilocks,Jul 14 2011, 09:30 AM]
i think so..
my baseband version I9100 DXKF1
kernel version 2.6.35.7-i9100XWKDD-CL161513 ROOT@DELL103#2
but i still get yellow triangle

[/quote]
the yellow triangle is nothing..if you want to remove it..flash stock kernel or buy a USB Jig..

[/quote]

another method quoted by Chainfire to remove yellow triangle but remain CF Root Kernel:

It is definitely possible to remove that pesky warning triangle during boot when running a custom kernel, though you should be well aware that this method does NOT reset the custom kernel flash counter. The steps are not complicated, but they aren't easy either, so read well.

(1) Make sure you have CF-Root flashed (see the first post). You must have the "CWM Manager" app available.

(2) Make sure you have the same version of CF-Root extracted until you have the zImage file. (ZIP --> extract --> TAR --> extract --> zImage).

(3) Push the zImage file to /sdcard . It must still be called zImage !

(4) Find an original Samsung signed stock kernel (preferably from the same stock firmware you have, but it's not terribly important)

(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)

(6) Fire up ODIN, and flash the Samsung kernel

(7) Boot the device with the stock kernel. CWM Manager will still be available.

(8) Start CWM Manager, select Flash Kernel, and select the zImage from CF-Root you previously put on your SD-card. The kernel will flash and the device will reboot.

(9) You will now notice you no longer have the warning triangle during boot, but you are actually running CF-Root with all it's goodies!

(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)

This post has been edited by AstonCheah: Jul 14 2011, 09:39 AM

i tried last night on my Litening 2.1 by turning off wifi, gps, phone data with Phoneweaver app.

6hrs = -5% the result was ok other than the Maps still running it self on idle. any ideas of why? how to stop it? hope can advice from all Sifus, thanks.


Attached thumbnail(s)

you mean wipe date/factory reset in CWM then flash stock kg1 then wipe date/factory reset again then flash litening? thanks.

thanks, will try 1st..

thanks bro, downloading..

hi all, just wanna share with y'all my most satisfying battery results on "Standby Mode" after some setting on my litening 2.2.


Attached thumbnail(s)

i did like you said and no pro so far..