Looks like cool n quite is enabled.

yea man...to OC u need to increase the multiplier over x16.5

How to check?

If i m not mistaken, my multiplier just go maximum 7.5x!!!!!???

do you check at bios or software?

how to check it?

you just said your multiplier can go max 7.5X, how do you check this?
how do you confirm that it can go max at 7.5x?

u sure it is CPU multiplier?

dont get confused with HT (HyperTransport) multiplier

[attachmentid=2698841][attachmentid=2698842]Need to ask fellow AMD sifu-sifu here. Is this (attahced CPUZ picture) considered good enough? Or should I say, safe enough? If not, please advise me what else to modify. Thanks a lot, fellow sifu-sifu of AMD O/C here.

1.448 vcore for 3.5Ghz proc is a bit high.. later your proc fried.
and please keep the HT Link at 2000Mhz or below.


the higher the NB freq is the best but, you'll need to increase the CPU/NB voltage

have you disable the Cool n Quiet? enable the cpu spread spectrum?

my latest attempt...

wow very nice vcore there on 4.5Ghz. Sir, this one is on air cooling or water cooled?
how high the speed ram can this chip sapport..
any superpi and aida64 memory benchmark? aida64 cpu queen?

Uhuk uhuk *water* uhuk uhuk

loor... if on air, how much estimate clock can get with that vcore?
1.39V quite good if can reach 4.0Ghz +...

how about the ram and cpu/nb speed...

as mentioned, it was done on entry level wc.

one cant expect value ram to do wonders nowadays, considerin how cheap they're priced. 1600 is possible but don't expect same timing, infact, they need to be loosened alot.

not that i dont wanna do a review, but it's kinda pointless to me as we all know fx will be humiliated by its predecessors in most test.

bd cpu-nb (24/7) clock varies from 2400~2700 (very2 rare), 2400 is quite common for all d chips i tested.

i need a pair of decent ram + lotsa reading/questionnaires in order to achieve decent clock on ram, so far i haven't broken 2200MHz wall which is kinda sad. i see ppl doing 2400 or above w/o sweat, well, that's what diff a boy from a man i guess. still lotsa things to be learned.

ah khoo base on your findings.. what's good in AM3+?

apart from fun in cpu/ram oc, i cant really find any good thing to talk about bro... we all knew ipc of BD is somehow screwed... but still, am a happy BD tweaker...

Ohhhh when will a FX6100 + Asus Crosshair 5 Formula drop into my lap from the sky

Sure looks good, volt ok, cpu-nb ok... what the temp?

U can actually try oc ur ram, i dont see why a dominator 1600mhz cant run at 1866mhz with lax timing.. last time my Gskill 1600mhz also was running at that speed

Whats ur current ram volt? Try setting it at 1.65v and let the timing run as it is now.. see how..