how good is good? 4.2Ghz @ 1.45vcore is good or not? i dun dare to push more than 1.48V for the vcore
at the moment since its still new in my hand i've tried 4.3Ghz @ 1.46vcore with 40+ 'C load
i dun know bug or what since my deneb 3.5Ghz @ 1.39vcore oredy 55+'C during load...

wow winova 2gb stick perform better with thuban core (zosma 960T)
2100 CL9-9-9 @ 1.648Vdimm is quite good to me. will stress them tomorrow.
maybe 1.648vdimm not enough to run at that speed...

i see gd80 there...

have fun with it bro, gd80 is meant for ram tweaaaKING... expect superb mileage when paired with psc sticks & FX chips.

This post has been edited by ah_khoo: Apr 4 2012, 09:35 AM

but still i have a hard time to achieve lower than 3M 37s for the superPi 8M
only can achieve sub 34-27s if push more on the core clock

cant wait to join dis club.
will post my 960T cpu-z tomorrow. rite nw still stress test, running on 6-core @3.8Ghz.

good 960T proc you have there..My 960T only get 4.0ghz@1.45v..max i try 4.1ghz@1.48v..can't go more already scare high vcore.

come join OC Comp here-> http://forum.lowyat.net/topic/2267078

i think the mobo oso play the rule.. this 1 i use msi 990FXA GD80, didn't try with my aus M4A87TD/USB3 yet...
but if looking at my deneb 945 C3, this GD80 or M4A87 not so much diff, both need to pump more vcore for my deneb
but for the ram OC, this GD80 mobo is far better

btw, i didn't stress using prime yet. just running bench only. lazy to stress yet

This post has been edited by lengchai86: Apr 4 2012, 06:16 PM

Want to show my unlocked 960T oc @ 3.73GHz. Prime95 4hours test stable.
It seems i cant keep the temperature below 55c if i increase the multipler to 16. So will keep it like this b4 tuning again.
Still not satisfied with it. Will try to push to at least 3.8 or 4.0.

why you keep the HT link above 2000Mhz?
keep it near to stock (2000Mhz). you can try lower the HT link multi.

push the fan to 100%

ok thx for the advice bro. forgot to disable cpu smart fan.
nw running on full speed. increase the multiplier to 17x, running on 4.0ghz. will try to stress it.

This post has been edited by ketapang: Apr 5 2012, 08:13 PM

990FX Motherboard Roundup with Thuban and Bulldozer – A Second Wind for ASUS, Gigabyte, MSI and Biostar
inside this motherboard review got mention about every reviewed board overclocking ability with thuban and bulldozer.
so can be a reference for overclocker here who plan to get a decent overclocking board.

nice info there good job

hello guys !

can i overclocking my CPU AMD Athlon 64 X2 5000+ . 2.6ghz to 3.0ghz or better .

here my spec :-

Motherboard : Abit A-N68SV (MCP68S)
chipset : Nvidia Geforce 7025
Southbridge : Nvidia nforce 630a
Bios : brand Phoenix Technologies,LTD . Version 6.00PG
Ram : kingston DDR2 800mhz , dual channel.
cpu cooler : amd stock cooler

ram timing : i dont know how to calculate .

so please teach me how to overclock . so me dont have to buy another cpu . sbub bajet low la..

I've decided to remove Old SPI Records due to i find that it is quite outdated.

This post has been edited by Genevieve72: Apr 10 2012, 04:44 PM

hah? what u means old SPI Record ? sorry . me slow in hardware .

so , what ur recomended to change the with the old ?



This post has been edited by kimonorish: Apr 10 2012, 04:57 PM

http://postimage.org/image/9f5j9lzmv/

http://postimage.org/image/3mxlwwfkd/

detail of my ram , and temperatures.

http://www.hardwaresecrets.com/article/Ath...verclocking/102
you can refer to this guide.
don't have pcie card?

timing too loose mate, try to tighten it to 4-4-4 instead. @ 200MHz, u can prolly run 2-2-2 w/ 2T.

thank mans .
yeah. i have it . AMD HD6670 1 gb ddr5

---

Added on April 10, 2012, 6:34 pmhow to do that ? . if u can show me. i appreciate .

my timing ram increase to 400.0 mhz ..

This post has been edited by kimonorish: Apr 10 2012, 06:37 PM

that was speed, not timing. timing is CL4-4-4, CL5-5-5 something like that

example, this ram run at 800MHz at CL4-4-4 timing


This post has been edited by lengchai86: Apr 10 2012, 07:23 PM