have you guys try to install the ZTE MF190 modem driver seperately first without install the dashboard before u plug in your zte mf190 modem ?

can try these:

- remove all dashboard modem software u install
- restart your computer
- go -> here to download Download  ZTE MF190 Driver (Windows)
- after finish download, run and install that drivers
- when fully install the driver wait 30 sec ~ 1 min then plug in your ZTE MF190 into usb port
- wait for auto drivers pop up,..
- try to check whether the modem driver is fully install and can detect by your computer or not 
- if detected fully, then u can install the dashboard modem software after
if those step above works, u might want to reflash update your ZTE MF190,

for u mobile set refer -> u mobile
download the .exe file and run it with your modem plug in usb first

for maxis set , refer -> maxis
download the Download Modem Firmware Update,
plug in your zte mf190, make sure detect by computer, then run those flash update file ..
hope it works

---

Added on September 25, 2012, 9:31 pm

for tl-mr3220 , can support zte mf190, u either need to disable the autorun CD on your zte mf190 before you plug it in, or go to tplink 3G modem bin file web pages download the ZTE MF190 mdoem bin file seperately and upload it into your mr3220 web interface under modem setting