anyone know how to fix the samsung kies problem,after update to gingerbread,unable to connect to samsung kies.now somemore got newer update.

---

Added on July 1, 2011, 6:57 pmI've updated to the latest ROM via Kies. DXJPE

PDA: JPE

PHONE: JPE

CSC: JPE (XME)

as shown in my attached picture but when I *#1234# it shows

PDA: P1000DXJPE

PHONE: P1000DXJPE

CSC: P1000OLBJPE how to change P1000OLBJPE to P1000DXJPE for XME

Is it correct, if not what should I do to get back to P1000DXJPE?

I try *#272*IMEI# change to XME it will change to DXJPE.

Help? Benny888, kmrdeva please.

So you upgrade your Tab is your CSC: P1000OLJBE or P1000DXJBE.

My tab updated from P1000DXJPD to P1000DXJPE. No big difference.
Guess this must be a fix for a serious bug. If not, Samsung won't release 2 firmwares in such a short time.

shit. really need help guys.

Downloaded latest samsung kies.

Performed upgrade for my tab.

The firmware downloaded, and proceeded to Firmware Upgrade. My tab was showing the android with the shovel. And the Firmware Upgrade window on my laptop was stuck at 0% for 1 whole hour.

I then proceeded to turn off my tab. Now I'm stuck at the phone and pc logo. Can't do anything. Need help pls.

yes u can used on different device but must be same google account

Yes. Except for some purchased apps that tie to IMEI, like RockPlayer (waste of my money) and PhoneWeaver (licensed only for my SGS' IMEI).

I m not sure this work for u or not,  some developer does send  me some authication file, so i able to use it  on my othera ndroid device.  . . By personal request :-)

i just follow this step.. i dunno want to flash rom hv to root n install bootloader patch..

Solution by fuser dave 18 : http://forum.lowyat.net/topic/1845083/+2180 read post# 2192

I've managed to roll back to stock DXJK2 (from Overcome GB v3 c/w latest kernel and ext4)and flashed stock GB ,DXJPD with Kies.
Here's what i did:

a)Flash with Odin3 v1.7
1. Download P1000DXKM3 from here. P1000DXKM3 - http://www.4shared.com/file/pqPvd29x/P1000DXKM3.html?
1. Backup your data.
2. Extract the firmware files from the P1000DXKM3.7z file.
3. select P1_add_hidden.pit for .pit file.
4. check repartition.
5. select AP_P1000DXKM3-REV03-ALL-CL874291.tar.md5 for PDA.
6. select CP_MODEM_P1000DXKM1_REV_00_CL873880.tar.md5 for PHONE.
7. select CSC_P1000OLBKM2-MULTI-CL878295.tar.md5 for CSC.
8. Flash your tab and wait for it to restart.
9. Welcome back to stock.

now i see already.. everytime i restart it go to system recovery mode.. but hv to use torch light to see it.. there is no light..

referring to step 22, is it a must or just an optional to patch bootloader before upgrading to 2.3.3 GB thru KIES?

thanx all..

Hi all,anyone know howto check whether my tab were ap ver. Or ori version.? I was told by one shop inkuching mine was an ap ver.but I bought it at samsung shop.