New arrival items:

New Pla Plate A4 Size 210mm x 297mm @ Rm15/Bags
1. Pla Plate 0.5mm x 4pcs
2. Pla Plate 0.8mm x 4pcs
3. Pla Plate 1.0mm x 3pcs
4. Pla Plate 1.2mm x 2pcs
5. Pla Plate 1.5mm x 2pcs




GM-301P GUNDAM MARKER Slushing Sumi-ire Pen (Black) (Paint) @ Rm10
GM-302P GUNDAM MARKER Slushing Sumi-ire Pen (Gray) (Paint) @ Rm10
GM-303P GUNDAM MARKER Slushing Sumi-ire Pen (Brown) (Paint) @ Rm10




G-Temple Painting Grip (20 pcs)


G-Temple Painting Grip Big Head (20 pcs)


G-TEMPLE Engraved Lines Transparent Tape 5mm (20pcs x 5sheets)


This post has been edited by tytroum: Dec 2 2013, 09:17 AM

New arrival items:

BAIREN Paint & Solvent resistant plastic measuring cup 30ml @ Rm3/pcs


Gaianotes G-02a Needle Cap


Mr. Bottle Spout (5 pieces)


MR HOBBY COLOR THINNER BOTTLE POURER CAP GT33


This post has been edited by tytroum: Dec 2 2013, 09:18 AM

Hi Bro cellastra,
1. Mr. Cement S x1
2. Zig Millenium Marker 0.05mm x1
3. Mr. Super Clear Glossy 170ml B-513 x1

Kangaroo tracking no: 805868316 (4/12/13)

Hi Bro MichaelJohn,
1. 3M SoftBack Sanding Sponge UltraFine800~1000 X 1
2. Olfa 10B ART KNIFE c/w 25pcs Blade X 1

3. LM01 LBX 0.2MM(VERY FINE) Black Gundam Line Marker (Paint) X 1
4. Keiba Japan Side Cutter X 1

5. 3 Peaks Japan Sharp Point Side Cutter X 1

6. New 9Sea A3 size Cutting Mat Made in Taiwan X 1
7. GSI-MS232 - Mr.Mark Setter 40ml X 1
8. Mr.Cement Deluxe 40ml MC-127 X 1

Kangaroo tracking no: 805868313 (4/12/13)

Hi Bro nilocwng,
1. Taiwan U-Star Metal Scribber UA-1800 x1

2. Olfa CMP-1 Compass Cutter x1


Kangaroo tracking no: 805868317 (4/12/13)

1) Taiwan U-Star Drill Set 0.2mm to 1.5mm (14pcs) x1

2) Pla plate 0.8mm x1


Kangaroo tracking no: 805868318 (4/12/13)

Hi Bro Iroquois Plissken,
1. Tamiya Epoxy Putty (Quick Surface) x1
2. Tamiya Epoxy Putty (Smooth Surface) x1
3. CHINA Epixt Putty (white) 100g x1


Kangaroo tracking no: 805868319 (4/12/13)

This post has been edited by tytroum: Dec 9 2013, 03:34 AM

Hi Bro dante3,
1. China Pin Vice 95mm (0.1mm ~ 3.2mm) x1

2. Mr Color (Lacquer Base) C08 silver, C09 gold x 2
3. 1/144 hg garazzo gundam x1
4. 1st Batch NG ASTRAEA F type (White) x1

Kangaroo tracking no : 805868320 (06-Dec-2013 )

Hi Bro dellins,
1) 9Sea A4 size Cutting Mat x1

2) Zig Millennium Markers 0.05mm (Super Fine) Black x1

3) 4Ways Sanding Block x1
4) HIQPart/G-Temple Made in Japan Super Sharp Point Side Cutter GT01 x1

5) Olfa 10B ART KNIFE c/w 25pcs Blade x1


Kangaroo tracking no : 805868321 (06-Dec-2013 )

Hi Bro waynewong.20s,
1) glass dropper (Medium) x2

2) empty bottle x 5 pcs

3) 9sea metal scriber x1

4) scribing tape @ x2

5) mr.crystal pearl xc01 x1

6) tamiya enamel paint
xf-2 flat white x1
x-17 pink x1
x-7 red x1
x-10 gun metal x2
7) 1 Mr.crystal pearl xc04 x1
8) pla Plate 0.5mm x4pcs/bag x1

Kangaroo tracking no : 805868322 06-Dec-2013

Hi Bro kennytee,
1) Mr cap opener x1

2) Epoxy Coated, extra fine tips Tweezer x1

3) Tamiya 87048 High Finish Pointed Brush (Ultra Fine) x1

4) Taiwan U-Star Paint Mixing Set x1


Kangaroo tracking no : 805868324 06-Dec-2013
pls post here to inform me after receive your parcel !


hi Bro kenzakiwing,
1) Taiwan U-Star Paint Mixing Plate x 5pcs

2) Tamiya 87019 High Quality Precision Brush (Small) x1

3) Mr color 1. White x 2 =
4) Stainless Steel Measuring Spoon 4pcs Set (1ml,2ml,5ml,10ml)

Kangaroo tracking no : 805868326 06-Dec-2013
pls post here to inform me after receive your parcel !

HI Bro Anj,
1. Japan HIQPart/G-Temple GT LINE ENGRAVER SET (5 IN 1) c/w COVER(0.1,0.15,0.2,0.3mm & Round Pin 0.1mm) x 1

2. Tamiya 87067 3 in 1 Modeling Brush HF Standard Set x 1
3. Tamiya 87079 Weathering master A set x 1
4. Tamiya 87080 Weathering master B set x 1
5. Tamiya 87088 Weathering master D set x 1

6. Lacquer Base T-108 Mr.COLOR LEVELING THINNER 400ml x 1
7. Mr.CEMENT LIMONNENE Type x 1

Kangaroo tracking no: 805868331 (9/12/13)

Hi Bro blu3hamm3r,
1. New Beginner Started Tool Set 7in1
Description : 9Sea A4 size Cutting Mat , 3 Peaks Japan Sharp Point Side Cutter , 9Sea Design Knife Model 303 with 12pcs Blade ,extra fine tips Tweezer ,Tamiya Cement Thin 40ml 87038 , Zig Millennium Markers 0.05mm (Super Fine) Black , 4Ways Sanding Block.
2. 3M SoftBack Sanding Sponge Medium
3. 3M SoftBack Sanding Sponge Fine
Kangaroo tracking no: 805868329 (9/12/13)


This post has been edited by tytroum: Dec 11 2013, 02:33 AM

Hi Bro,

Payment received with Thank ! your order will post on Friday !

Sorry all display box sold out.

Don't have acrylic paint.

Got Tamiya Enamel, Mr color and Gaianotes only.

Hi necromencer,
- 1 x Wave HT-196 Parts Opener-1 @rm19 ok.
- 1 x Kleins Limo Pen Fine Type @rm18 (Last 1unit)
- 1 x ZIG Milennium Markers 0.05mm @rm10 ok
- 4 x Too. COPIC Modeler 0.02 Black (Discon)
Replace by Zig Millennium Markers 0.05mm (Super Fine) Black @ Rm10 x1
- 2 X Action Base 1 @rm25 (sold out)
- 1 x RG Destiny Gundam @rm82 (Sold out), RG left Justice,Aile Strike, Zaku Red & Green only.

for Beginner use below :

N3. Keiba Japan Side Cutter @ Rm25.(PWP Rm23) (last 3units)(sold 2units to seng88,1unit to underworld & 1unit to mr0md,1unit to rekjl)

N4. 3 Peaks Japan Sharp Point Side Cutter @ Rm22(PWP Rm20) (Last 5units)(sold 1unit to Frankie,lalanuni x1)

N5. MTC Japan Side Cutter @ Rm25(sold out)

Ebamel and Lacquer Base can't paint on Silicon rubber Bro !

1. G-Temple Super Sharp Point Side Cutter GT-01 @ Rm70, Now Rm68


2. G-Temple Ultra Sharp Point Side Cutter GT-02 Right Hand or GT-02L Left Hand @ Rm105, Now Rm98




shipment on d way, reach here B4 Chrismas !

This post has been edited by tytroum: Dec 13 2013, 08:29 PM

Hi,

I have Tamiya Enamel. Mr Color & Gaianotes, is for Air Brush use !

for Hand Painting u better use Acrylic paint but very hard to get that color !

Hi Bro weimintohkahouki,
1. 3M SoftBack Sanding Sponge SuperFine600~800/UltraFine800~1000/MicroFine1200~1500 3 in 1
2. 3M SoftBack Sanding Sponge Fine200~400 x 1
3. Nitto Masking Tape 24mm
4. Tamiya 74017 Paint Stirrer
5. Tamiya 87038 Cement Glue 40ml
6. Tamiya 87024 Finishing Abrasives Asst (5pcs)
7. GM-301P GUNDAM MARKER Slushing Sumi-ire Pen (Black) (Paint)
8. GM-302P GUNDAM MARKER Slushing Sumi-ire Pen (Gray) (Paint)
9. Tamiya Enamel X1 Black
10. Tamiya Enamel X7 Red
11. Tamiya Enamel X-23 Clear Blue
12. Gaianotes Mixing Tray 10pcs with Stick 5pcs
13. Empty Bottle 30ml x5
Kangaroo tracking no: 805868334 ( 13/12/13)
pls post here to inform me after receive your parcel !

This post has been edited by tytroum: Dec 18 2013, 12:03 PM

Year end, many fast moving item Low stock, u better cfm now. TQ!

Yup , LAST UNIT EACH
Mr Finishing Surfacer 1500 Black 170ml B-526 @ rm40

Mr Finishing Surfacer 1500 Black 40ml SF288 @ rm23

Mr Finishing Surfacer 1500 Grey 40ml SF289 @ rm23

Pls check the price from my sale thread 1st post , different Brand and color different price.

hi fishtank98,

1. Mini Filter for Airbrush x1

2. Hakco Spray Booth (Last unit) x1

Kangaroo tracking no: 806008645 (16/12/13)
pls post here to inform me after receive your parcel !

Hi Bro necromencer,
1. Zig Millenium Marker 0.05mm Black x5
2. 3M Sanding Sponge 800~1000 x1
3. Kleins Limo Pen Finel Type x1
Kangaroo tracking no: 806008646 (16/12/13)
pls post here to inform me after receive your parcel !

This post has been edited by tytroum: Dec 18 2013, 11:56 AM

Hi royrev92,
1) Nu Gundam Ver.Ka (MG) x 1 unit
2) China GNX LED 2pcs/Bag c/w 4pcs Battery x 1 bag(last unit)
3) Japan HIQPart(G-Temple) GT-DSC Painting Clip (20pcs/Bag) + GT-DSC Painting Base (2Set/Bag) x 1 set
4) GMS105 Gundam Marker Set (Paint) x 1 unit
5) Mr. Super Clear Flat 170ml B-514 x 1 unit
Kangaroo tracking no: 806008643 (16/12/13)
pls post here to inform me after receive your parcel !

Hi Bro AshrafNajme,
Taiwan U-Star Paint Mixing x1
3 pieces of Taiwan U-Star Paint Mixing Plate

Kangaroo tracking no: 806008649 (18/12/13)
pls post here to inform me after receive the parcel. TQ!


hi Bro wsypross,
Best Quality New Beginner Started Tool Set 7in1 (with UpGrade)
Description : 9Sea A4 size Cutting Mat ,G-Temple cutter GT 1 Sharp Point Side Cutter , 9Sea Design Knife Model 303 with 12pcs Blade ,extra fine tips Tweezer ,Mr.Cement Deluxe 40ml MC-127 , Zig Millennium Markers 0.05mm (Super Fine) Black , 4Ways Sanding Block.
Kangaroo tracking no: 806008650 (18/12/13)
pls post here to inform me after receive the parcel. TQ!

Hi Bro Stephen cools,
1. Wave HT-196 Parts Opener x 1
2. Hasegawa File Set TT-15 (Standard Type 5pcs) x 1
3. Taiwan U-Star UP-990034 x 1
4. Taiwan U-Star UP-990035 x 1
5. GM02 grey x 1
6. Tamiya 87038 Cement Glue 40ml x 1
7.G-Temple Ultra Sharp Point Cutter GT-01 x 1
8. Tamiya 74098 Modeller's Knife Pro x 1
Kangaroo tracking no: 806008651 (18/12/13)
pls post here to inform me after receive the parcel. TQ!

This post has been edited by tytroum: Dec 29 2013, 04:19 PM