i tot it was a 'real' signage for the moment..lol
good job drex..nice

actually the mcintosh setup can play. juz need to custom a power supply for a dedicated DAC(input for iPhone,iPod, iPad)..kow tim.
the project didnt manage to pull through.owner says hold 1st...sob sob

u need this baby..
awesome DAC(dedicated) designed to play all iPad,iPhone,iPod
in-built DAC on the iProducts cant perform. need a aftermarket dedicated DAC
*need to custom build a PSU to run in car
*further improved by employing a more serious build on PSU reservoir + decoupling


sexy looking DAC..

This post has been edited by carcrazy: Jul 18 2011, 12:42 AM

yea..awesome site for ppl into this

if u like his bass, u should have listen to it 3months ago. big difference!!
same sub but mods on his DAC were removed!! pity..sob sob

not to worry, i will produce a system in my new old ride. definitely for bass lover. u will notice a pronounced effect on the sub low extension + density. will be able to play all kinds of music. range from audiophile music to generic pop/r&b. from RM145 CD to RM25 CD's. the setup will be the same for all CD's, no tuning adjustment or other preset needed. 1 tuning/preset for all CD's..
dats the ideal setup. sounds good even on normal CD's..

burn CD's are NOT allow..only original..lol

This post has been edited by carcrazy: Jul 18 2011, 01:03 AM

this was my plan for my new car setup. its oredy long overdue..will rush out asap.
all hardwares are ready stock

source unit consist of 3 main parts:
cd transport: MX4000 modded with high-end low jitter correction clock with precision better than 0.2ppm
* dedicated ultra low noise wide bandwidth digital power supply to modded clock
external DAC: MDA4000 modded in PSU stage, improved digital PSU stage, improved IV converters, upgraded output stage with fully discrete components, blackgates NX Hi-Q as decoupling cap, coupling improved
external preamp: renovatio electron tube with NOS 60's tubes(bypass MX4000 preamp stage)
DC-DC Converter: upgraded PSU + Vcap as decoupling cap
DC harness: customized van den hul cables + 6N OHNO pure copper in teflon jacket with mundorf silver gold solder

frontstage: renovatio CS3 MKII
customized passive: duelund coherent audio parts
frontstage amp: mcintosh MCC302 X 2unit
subwoofer: JL Audio W3 12"
* now maybe thinking of building a horn loaded sub
sub-amp: mcintosh MCC301M class AB monoblock
external preamp: audiocontrol EQ - modded level 3 signature

interconnect: van den hul MC Gold Hybrid, van den hul Thunderline Hybrid, van den hul the second, pure silver digital coaxial 75ohm with quad shielding
speaker cables: van den hul revelation hybrid 6awg, van den hul CS122 Hybrid
sub cable: van den hul magnum hybrid 8awg
power/grounding cable: scosche 0awg,4awg,8awg, 6N OHNO pure copper in teflon jacket
connectors: furutech pure copper spade + rhodium spade
capacitors: mundorf headcap X 14units + mundorf 1F X 3 units
power line conditioners: renovatio PLC X 4units
bybee large quantum purifier X 10 units
cardas EMI/RF caps + shorting plugs
cryogenic fuse
stinger distribution block
Mundorf silver gold solder

---

Added on July 18, 2011, 1:18 amsupport ur favourite artist..buy original!!

This post has been edited by carcrazy: Jul 18 2011, 01:18 AM

[quote=krayden,Jul 18 2011, 10:07 AM]
I like the OK sticker. If you finish this, I wanna see, touch and hear.

Aiyor..dun have enuf time to proceed with the above. Only if its confirm, then will proceed.

Now customizing my 6.5" midrange + 6.5" midbass on my ride.
At the same time need to rush out the following:
1. 32drivers wide baffle transmission line for front av channel
2. Finalize my pcb board for tube preamp before production
3. Mod burson headphobe dac+amp psu and analog stage, 8 units large bybee + 2 smallslipstream silver

quaza,
Dun get sacd hybrid if the same album has other re-mastering.
Reason- car hu cant decode sacd mostly.

He'll just FLAC rip it then seal the SACD for the next generation.

lol..

tua liap tweeter looks sexy!!..
but i guess its the music reproduction benefit dat most owners dun mind installing...
i plan to install a slightly larger format tweeter. close to 5" with small horn loaded built in it..shd be interesting in car hifi

no need to fabricate grill lar..ori looks sexy..its a scanspeak air circ.
the only ppl will touch ur nen nen is the BTC guys.
so go educate them if there are in ur car.
kow tim

ur so hamsap..hehe

mywifecar@mychampioncar
r u referring to this awsomeness!!




no way this amp is known as ol' skool man.
its 'the amp' for any car audio setup..
some people say, you'll 'lau chap' after auditioning the amp...hehe

notice the 2 tities sticking out. they are NOT transformer for the power supply.
its a output transformer for speaker output..hence music reproduction amazing!!
i believe there isnt any class AB amp with output transformer in car audio other than this.

this is my new toy, my on-going research for car audio preamp
output tranny!! so sexy

fuiyor..but RC heli even more fun.

wrong..this is called a newbie with basic understanding what needs to be done. do it once but do it right!!
another happy ICER on the road rather than another individual b****ing about why like this n like dat..hehe

this kind of labour shd be done at jordan's place. great guy with a good attitude..
poor guy did so much of fibreworks, end up smelling fibre breath even when he sleeps. his GF says
hard earn money with hazzordous health occupation

will let u know soon. need to complete a long overdue cabinet for customer 1st.