QUOTE(AhPang92 @ Oct 11 2011, 07:28 PM)
thanks for the advise?? =D
This will be the steps that I will only mention once how to partition your microSD card with a Linux partition for App2SD+.
Looking at your posts I assume you did not change your recovery so most likely it is ClockWorkMod 2.5.1.8
There are many other Recoveries on XDA like AmonRa, 4EXT, and 1 more forgot.
Anyway steps:
1) Copy your Sd card any valuable information or (just copy the whole sd) and paste it somewhere safe (eg: Laptop/Desktop/HDD)
2) Go into Recovery mode (if you already using custom ROM, just hold power button, reboot, pick Recovery *Assuming it supports 4-way reboot* if you do not have the option to do so, shut down. Once you have shut down, hold power and vol-down button together, you will enter bootloader. In HBOOT mode, vol down and press Power to select Recovery)
3) Now you are in Recovery mode, the words should be in green, and choices are highlighted with green bar. Now, you can use your trackpad to navigate so go all the way down and select
- advanced4) Look for the option, " - Partition SD Card " , press your trackpad.
5) Ext Size, choose the amount of partition you want. I recommend 512MB is sufficient but 1GB if you have 16/32GB microSD. Press your trackpad.
6) Swap Size, we used to use it but not anymore now so leave it at 0MB and you're done!
See? So simple..
eh Bang Hazril sticky! LOL jk
This post has been edited by ShinnKQ: Oct 11 2011, 07:45 PM