noise can diy fix...add some cushion on certain area will help.

Why slow?

Erm.. Last time I remembered 320i is cost ard 20k pound and the 1M is costing 40k pound. So I presume ard RM500k when reach malaysia shores. Shocking price for a 1 series eh But look at the bright side, using z4 inline 6 engine on its car it can win M3 in a same track same driver in 0.3sec.

Anyone encounter those problem, gearbox got water inside and made my gear shift from gear 2 to 3 unstable, and seldom hear ngrek ngrek noise when changing gear 2 to 3 ....

Its either u stuff something at the aircond left right adjuster or blow it to the most left or right where the hinge got tight to closing it.

wat happen?

lady driver?

yes, PE will blink appro less than 5L.

0.3 is too small figure la.. u cant say its the engine that causes the difference.. it could be more of the driver than the engine rite..?

no idea.. got ppl share it at muka buku...

Not engine only. The car itself is lighter already so it have a close power to weight ratio to m3 but there's a downside that its more prone to powerslide.

You can try this




I use doubleside tape stick. This is how i diy my Persona Rattling sound from the vent

Nice one,bro. Can eliminate the shaking noise.

try not use too thick doubleside foam tape.

Mine i stick to the vent another side i stick with those wire tape, so i still can move the knob..although a bit tight....

everyone like tight tight siham....
oot...

Don't remember siham got rattling sound. Only squishing sound.

anyone diy the touch up paint at bumper??
yesterday night i make a french kiss with divider and PE butt, is really syok and bleed... now my PE butt is scratched a bit...

is this paint suitable for my PE butt? selling from a forumer.
http://forum.lowyat.net/topic/1833931

You stick below the for the 2nd pic? Need to take out the vent?

no need take out..Just direct stick, u might need some flat screwdriver to push in the tape in between

for the top tape. Just close the vent then stick

This post has been edited by muslayer: Jul 6 2011, 11:37 AM

Malaysia price very special wan mah.. U Duno meh? In U.S, the price of a Murcielago & a SLR McLaren is the same, but when it reaches Malaysian shores, RM2.2M for the Murcie, RM 7M for the SLR. Malaysia is screwed up with all the taxation lah..

Anyway, the 1M is 0.3 secs faster, but in a straight line the M3 is 0.3 secs faster to 100km/h. I mean, C'mon.. Those are just figures, and the difference aren't really significant like it's 10 secs apart. What would u do with that extra 0.3 secs? I'm sure u'd lose that 0.3 sec once u screw up ur gearchange by changing gear at the wrong RPM..



This post has been edited by xandras: Jul 6 2011, 11:40 AM

Can show pictures of the scratches? If too many also, not recommended to touch up by urself.

Touch up can ,but will not look so nice. I already touch up mine, from far cannot see the touch up.