That's the reason I am asking when you bought. I suspect firmware issue (not up-to-date).
MY broadcast via DVB-T solely in KL area for years before upgrade to DVB-T2. However Thailand never broadcast using DVB-T. They used DVB-T2 straight away (skipped DVB-T). IMO the firmware for MY region in your TV is only edited / limited to DVB-T (without DVB-T2); as for TH region is in DVB-T2 freq. range, by manufacturer.
I am using Thai brand i-Mobile smart phone (model # iQ 5.8 DTV) since 2014 where it has built-in DVB-T/T2 features (no external USB adaptor required). If I selected MY region, it will start scanning starting from DVB-T till DVB-T2 freq. range. However, if region selected = TH, it will scan only DVB-T2 freq. range, which appeared to be faster (shorter time to wait for completion of scanning).
really nice phone
QUOTE(saxmydix @ Mar 18 2017, 10:52 PM)
Hi guys, im getting my usb dvb-t2 stick next week. Just want to ask what is the video format they are using? MPEG-4 or MPEG-2 ? Because im using it on my rpi3, and MPEG-2 required license for HW decoding. Thanks.
Compliant with: MPEG-4 part10/MPEG-2 ISO/IEC 13818 MPEG-4 Simple/Main/Advanced Profile@LEVEL3(10Mbps) MPEG-2 Main Profile# Main Level(15Mbps) H.264 MP#L3(10Mbps).H.264 HP L4.1(25Mbps)
This post has been edited by muhammadsiddiq: Mar 19 2017, 09:59 AM
Suddently my tv got no signal. I tried scan a few times then ok. But few minutes later got no signal again, wondering what happen i juat suspect 2 eother my antenna cable got kaput or centralize building antenna not functioning.
What shoud i do? In my mind think to buy new antenna
RG6. RG59 does not handle high frequencies well - you will notice signal degradation after a short while with it. It is typically used for CCTV transmission @ 60MHz
I bought the same tv model as u, but mine is 40 inch. Tried to scan using the Thailand as country setting during the auto scan, but no signal detected.😥 Can u suggest what kind of antenna u're using as i currently use JP5E, from 4th floor apartment.
mine same as u, u shold check the cable make sure its fit properly, and currently the Malaysian setting work fine with me 😀😀