Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 Digital TV Station Malaysia, How do I tune to digital TV station?

views
     
carerra
post Sep 23 2019, 11:25 AM

New Member
*
Junior Member
12 posts

Joined: Jan 2015
I am using DTV.
When viewing 8TV for example, if using ATV, the TV screen display is FULL SCREEN.
But when switch to DTV, the TV screen is not full screen.
Anyone experiencing this problem?
Can fix this problem?
Or is broadcast signal problem?

PS : NTV7 also the same problem but TV3 is OK.
carerra
post Sep 23 2019, 01:03 PM

New Member
*
Junior Member
12 posts

Joined: Jan 2015
Yes, the black bars on the side.
But I can;t seems to find the setting in the TV.
At the TV DISPLAY MODE, there is only 1 option which is AUTO.
Will check the setting again.
carerra
post Sep 26 2019, 10:35 AM

New Member
*
Junior Member
12 posts

Joined: Jan 2015
The current digital signal, some channels are in SD and some in HD. Will all the channels be broadcast in HD eventually?
carerra
post Sep 30 2019, 10:07 AM

New Member
*
Junior Member
12 posts

Joined: Jan 2015
Those who use NJOI, now how much need to pay(equipment + installation)?
Only pay 1 time only, right?
NJOI during heavy raining time no signal interrupt?
carerra
post Oct 7 2019, 10:45 AM

New Member
*
Junior Member
12 posts

Joined: Jan 2015
My TV can only receive 9 digital channels, namely TV3,NTV7,8TV,TV9,BNC,AL HIJRAH,CJ WOWX2,GO SHOP.
RTM channels and Radio channels cannot receive.
Even in analog, RTM ch is very very snowy(basically cannot watch).
Is it different broadcast station?
carerra
post Oct 7 2019, 01:36 PM

New Member
*
Junior Member
12 posts

Joined: Jan 2015
QUOTE(joshhd @ Oct 7 2019, 11:20 AM)
What are your location? Which state and city?

Digital broadcast doesn't "snow" like analogue broadcast. However, if the signal is poor, pixelation will appear, similar like playing a scratched DVD movie disc.

If you experience some signal interruption during weather changes like raining or can't receive certain channels like RTM channels, you might want to readjust your antenna. While adjusting the antenna, make sure to monitor the signal strength readings. Keep adjusting until you get the highest stable signal readings and the signal readings is not fluctuating.

Are you using a new UHF antenna? Outdoor or indoor antenna? Is it in good condition?

How about the cabling? If the cabling is 10++ years already, it is advised to change a new cabling, and make sure to get a RG6 coaxial cable type (not the super old 3C-2V type).
*
Yes, I also think that it is the outdoor antenna problem.
Will try and adjust the antenna.

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.3449sec    0.30    7 queries    GZIP Disabled
Time is now: 6th December 2025 - 11:36 PM