^
n, does the DFI LP nF3 250Gb still have the Marvell SATA limitation controller error when you o/c ?

"The second problem is that the Serial ATA ports numbered 1 and 2 are implemented through an additional PHY controller from Marvell. This controller is very capricious about high clock-gen frequencies, and Serial ATA drives attached to this controller's ports stop to work even at a slightest overclocking. So, you should disable the first two Serial ATA ports when overclocking the DFI LANPARTY UT nF3 250Gb and use only ports 3 and 4 which are attached directly to the chipset."

- http://www.xbitlabs.com/articles/cpu/displ...ron-2600_8.html

or..
Did they solve this problem already with the latest bios ?

heres one with the 2500+


AMD Sempron 2500+ @ 2842.18 MHz (100% O/C)
by lamby_splendid (overclockerindo)
http://valid.x86-secret.com/show_oc?id=47175



AMD Sempron 2500+ @ 2812.93MHz (100% O/C)
by Adrianus, Siadi, Yayan (overclockerindo)
http://valid.x86-secret.com/show_oc.php?id=47401



AMD Sempron 2500+ @ 2766.38 MHz
by tezar! (overclockerindo)
http://valid.x86-secret.com/show_oc?id=46915






alright, thanks for the clarification

This post has been edited by fendii: Nov 22 2005, 01:02 PM

eh? u bought ur s64 2500+ same place as you helped me bought mine ?
hehe i surely hope mine will o/c as high as yours

Offtopic :

Oh hi wtm, how's your cousin's soon-to-be rig going on lately?

As for my new rig, I dont think I'll be o/c'ing it for the 1st few days, not until I get my important downloads done..

By the way, does my naked rig remind you of Jenga blocks ? hehe



Oh yes, its an accident waiting to happen alright heh

And thanks for the o/c tips from your PM wtm, i'll try them later

er, why are yours 1s slower than mine ?



My sempron 2500+ @ 2.42 GHz
- On stock VCore & stock heatsink


512MB Kingston VR DT-D43 @ 2.7V 3-3-3-6
346.9HTT
DRAM/FSB = 5/06
VAGP = 1.8V
VChip = 1.9V @ 34˚C
4MB PCI Graphics card
160GB Maxtor 8MB Cache IDE HDD
580W Hiper Type-R Modular PSU

This post has been edited by fendii: Dec 12 2005, 10:42 PM