2500+, DFI Infinity nF4X PCIE = 345HTT Still Priming...stock voltage...Rams at 1/166mhz...speed aledi in 2.4 area..

This post has been edited by antonio_zth: Nov 9 2005, 03:43 PM

mine is E6 Palermo Week 38

is CPUID it says that my CPU is FX 146...

4400 mushkin...

TCCD's....of course....

in DINSTER Bulk's there is the set of rams selling about 7++....but maybe it is unlike my rams....same model same chip..diffrent revision...according to ROBYNCOM...

2500+ mine 345 can bench all (sandra,PI,everest,Quake4, Aquamark,3Dmark...but cannot prime only...Mebbe vcore not enough as i'm pumping standard voltage....


well to get the best...all must be the best...


Mobo limitations maybe...but try find a solution by looking for bioses upgrade...

2-2-2-6 <-small value = tight
3-4-4-8 <-large value = loose

90 according to PCzone quotation this week....

true getting 2800 is better if the price diffrence is affordable....

but juz say like my 2500+ week xx can go selambederk 345 HTT stock everything, if i want the same like performance i should find the same cetain week also...which is kinda hard for low end cpu's which usually ends up in an ordinary Joe's PC...

hehehe..thanks for the offer..but right now i'm runing 2500+ 2500mhz sempron...hihihih

still benching to find swwet spot...

btw here it is

CPU 1.475v
NB 1.6v
PCIE 101mhz

MUSHKIN 4400 Black Level LL2 @ TCCD 2.5 4 4 8 = 2.9v

0538...i cant remember the rest...hihihi..didnt write when installing...

The DFI Infinity nF4X 754 = 3.2v

:P:P:P:P


....try setting back all to factory defaults then try and overclock back again...if while in stock settings also litdat it means corruptions has occured...

what kinda corruption? windows?
stock setting also like that

btw what is HT multiplier for?


Its the end like flow of the overall speed...Just like soulfly explained try to keep it below 800 for 754 and 1000 for 939....above those speed it will no give u any advandtages anymore...other than instabilities....

if i'm running 270 x 8 can just let it stick at 4x HT or should i lower it to 3xHT?

270 * 4 aledi 1080mhz...yes u can go that high but try to keep it lower from 800mhz....like i replied on top...there are no gain in speeds...


dude.... he's on nF4 ler

270 x 4 = 1080MHz .... should be still okay if you don't have any problem with stability

or else lower the HT multi to 3x


i didnt see any semprons around with 939...so he should be on 754 and that is 800...


oh man.. u guys gile sial.. processor cheap but RAM freaking expensive..


not "gile"...but if should we don punishemnts should there be equipments to do it....if not we wont find the weaknees of whic parts failed to achieve...


issit? any value ram using this chipset?


if got i really wanna get one...
Sorry dude but no....


No... because the production cost is expensive. TCCD is strictly for performance RAM.

anyway.... just want to share a joke. someone trying to be clever

http://forum.cari.com.my/viewthread.php?ti...page%3D1&page=2

as far as i know, there is no sempron 3500+ priced at RM300 available in the market, and he refered to Lowyatt Plaza. heck... AMD was never produce it yet.... and he kept arguing with me that such thing does exist



normal lar taiko soulfly...everybody wanna show that they are so clever and they tend to forget there is someone else cleverer than others each time he says that he is clever...


That fellow lives in kampung and never been to lowyat plaza be4 i think . Anyway, would like to ask you guys a few questions:

1.How far can a 2500+ S754 clock with a pair of value ram? DDR400 Kingston ones. Don't have to be accurate but just share ur experiance will do.

2. Is Abit KV8Pro the mobo to go? If budget user i mean.....

Thank you very much .


mine is week 38 and will do 300 HTT on stock voltages...



soulfly, try to link them to here n we can start an argument here hehe


no need bringin idiots to and elite party...that will on either make him looks even stupid or brag intelligent people of being just as he is...


n songhan, try using apacer ram, kingston always got incompatibility issue with nf3 mobo, dunno pcb or chipset problem...


really???why not try advandce module...??its much cheaper and no one ever had any problems with them....
its how u set that matters...not the Brand...


Abit???Abit forum???the last time i was there is when somebody from lowyat.net try to prove me wrong by telling me that Fatality is much way better than SLI-DR... ...

But nevertheless try and tweak ur rams by setting the values in the bios manually or try inserting it in a diffrent slots...


HAHAHAHA....DFI Stupid...maybe they are...and people who tested them and get world records out of the board is stupid...and also people who acknowledge DFI is an idiot....

even my mushkin can't be detected as DDR400 in my DFI INfinity Nf4X 754...it is a cpu limitation and not DFI's fault...but nevertheless maybe its just me....

Not recommended so the no good???Which side is stupid???DFI, Corsair, or OCZ????

Comparing with Pentiums????hmmmmm...

This post has been edited by PCcrazy: Nov 16 2005, 03:43 PM

thankz boss...no news rite now...hihihihi....still testing my sempron to be above 400HTT....hehehehe...dunno when siap..


hehehe...i know pun bcoz of i'm using NF4X....hehehe...b4 this dunno...kimikikiki

due to cpu limitation factor double sided modules with 512MB of rams cant run at DDR400 if put 2 sticks...

i'm using 2X512 larrr....

yerp...dual pack....512x2 = 1GB



This post has been edited by antonio_zth: Nov 29 2005, 06:46 PM

errmm...nop....

overclocking is about running ur components out of spec....not about high end....

It is easier bcoz of the availability of headroom u can achieve...but if ur stuck wif cheper rams...JUZ run on dividers lets say 100...then u can achieve 300HTT of 300 FSB in technical saying...

My DFI nF4x and Acbel 550w Died....RMA indeed....
uwaaaaaaaaaa.......

Hope my sempron will live....