eh? u bought ur s64 2500+ same place as you helped me bought mine ?
hehe i surely hope mine will o/c as high as yours

wahh so nice. my Sempron 2800+ only can do 300HTT so far. 8x300 that is.

should've gotten me a 2500+ instead save me RM 100 and get better speed.

maybe my 2800+ still has potential.......... hrmrmr........ why not you help me OC. hehe.

Try this setting
HTT - 337
HTT ratio - 3x or 2.5x
Ram Divider : 133% with 1T timing. K8 dont like 2T
PCIe clock : 101mhz
Chipset voltage : As low as posible. If high , it will generate heat and cause u unstable when under high HTT.

Try to Oc with 1 stick of ram. If u on two stick...use 100% divider and see how high u can go.

If you on Hynix chipset ram, like DT-D43,BT-D43,BT-J.
Row cycle time~ 11-12
Row refresh cycle time ~ 11-13

double post!! sorry

This post has been edited by sidewinderz: Dec 6 2005, 08:31 PM

damn..my scores not as high as wtm's, wonder wat devider is he on....

gosh..my scores lower than wtm's...


Attached thumbnail(s)

any help for tp-d43?

hehe sorry cant wait for ur proc n mobo, kinda urgent la

not the same, i trade with superpc proc tht is earlier batch, but i choose M stepping for u coz i trust M will do better

goldfries, u upgrade to the latest bios edi? ori bios sux 1 cant oc, n cyclone is true, sometimes 2 stick of double sided value ram limits the OC on s754 mobo, n i set all the ram option manually, anything auto will not boot at high htt

my sifu it's true nf4 chipset is really hot, i stay with default chipset voltage at 345htt, eventhough at default it's still a lot hotter than dfi lp nf3 last time

sidewinderz no worries, maybe u din manually set all the ram timing? i get ~946 score at 3dmark03 at 335htt last time, ram is same kvr infineon be6 but with all manual setting, dfi will run faster with all the manual setting or maybe nf4 punya pasal?

latest BIOS from where? if from ABIT - then i already tried, the ABIT utility say no need to update cos updated.

as for the RAM - i set the RAM manually and can run dual stick at 300HTT.

now on the DFI, can't even run 288HT with dual sticks. maybe time to play with the divider again. if not, then the voltage.

I already test K8 with 2T timing, and the result was like more than 200MB/s slower compare to 1T

2T enables me to run 1:1 at 325Mhz HTT (DDR650) but the score is still lower compare to my 1:1 1T at 313Mhz HTT (DDR626)

ya 2T sux, only looks cool, higher fsb in k8 oni

fendii, hows ur result?

can you all post your sandra cpu arithmetic mark herE?? wanna see how is the performance like...not to forget the memory bandwith test as well..

Offtopic :

Oh hi wtm, how's your cousin's soon-to-be rig going on lately?

As for my new rig, I dont think I'll be o/c'ing it for the 1st few days, not until I get my important downloads done..

By the way, does my naked rig remind you of Jenga blocks ? hehe



Oh yes, its an accident waiting to happen alright heh

And thanks for the o/c tips from your PM wtm, i'll try them later

sure but next week, the rig is at my hometown

will goin to s939 later hehe, or maybe waiting for M2 instead can use laptop between this mean time...

ya miss them though, but i'm sure he gets a better owner now

here's ma result, 3dmark03 cpu score lower down to ~910 after installing latest nf4 driver


This post has been edited by wtm0325: Dec 14 2005, 03:44 AM

erm..super pi nop so good ler....erm.....abit slow

my sempron 2.6G only get 43sec of PI....even lower

Cache kecik maaaa.....Thats why SPI time will sucks big time...try running memory related laar...sure cun scores wan....

er, why are yours 1s slower than mine ?



My sempron 2500+ @ 2.42 GHz
- On stock VCore & stock heatsink


512MB Kingston VR DT-D43 @ 2.7V 3-3-3-6
346.9HTT
DRAM/FSB = 5/06
VAGP = 1.8V
VChip = 1.9V @ 34˚C
4MB PCI Graphics card
160GB Maxtor 8MB Cache IDE HDD
580W Hiper Type-R Modular PSU

This post has been edited by fendii: Dec 12 2005, 10:42 PM

wow fendii u r cool, xxMx stepping is really a nice 1

i'm running at 3:2 divider, ma ram only stable at 230mhz