Outline ·
[ Standard ] ·
Linear+
Sempron64 2500+ , 2800+ OC tests
|
antonio
|
 Nov 25 2005, 05:41 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(goldfries @ Nov 25 2005, 05:12 PM) i only reach 275. i'm a baby for S754/939 OCing.  yesterday i stepped out of Socket A universe. hehe. so now my sempy 2800+ at 2.2ghz. 8x 275. POST that time, it sez my memory is DDR333 only. hrmrmr.......... i want to use my BT-D43 laaaa. HTT is currently at 3x. i really don't know what to ask in specific, i just want to know how to tweak further. how do i find out which is the limiting factor now? CPU vs MB vs RAM due to cpu limitation factor double sided modules with 512MB of rams cant run at DDR400 if put 2 sticks... |
|
|
|
|
|
wtm0325
|
Nov 25 2005, 05:59 PM
|
|
|
yea mr zorro is rite, n remember to manually set the ram timing, wat mobo ru using?
|
|
|
|
|
|
goldfries
|
Nov 25 2005, 06:12 PM
|
40K Club
|
NV8.  i set RAM to auto - it works. i put by SPD (run at 400) - won't boot. if not mistake won't POST also haven't tried manual my BTs are all double sided modules. hrmrm............ i'm just curious now on what is limiting me. |
|
|
|
|
|
wtm0325
|
Nov 25 2005, 06:16 PM
|
|
|
ya it works, last time my nf8 works oso, but cant go high, u hv to manually set ur ram timing on can go above 300htt
|
|
|
|
|
|
sidewinderz
|
Nov 26 2005, 04:13 PM
|
|
|
just wondering, why 1 stick of ram perform much better than 2 sticks?? any1 care to explain it?wonder if they have 1x2Gb stick...  |
|
|
|
|
|
wtm0325
|
Nov 27 2005, 12:08 AM
|
|
|
not 1gb stick perform better, it's becoz s754 cpu is built in with single memory controller, it's cpu limitation... if u put 2 stick 1gb oso same, htt might be limited
|
|
|
|
|
|
sidewinderz
|
Nov 27 2005, 12:25 AM
|
|
|
QUOTE(wtm0325 @ Nov 27 2005, 12:08 AM) not 1gb stick perform better, it's becoz s754 cpu is built in with single memory controller, it's cpu limitation... if u put 2 stick 1gb oso same, htt might be limited yea..pretty sad to hear that...cant bare with 512mb of rams...so plug in the other piece...now running at 2.4ghz again...sigh... |
|
|
|
|
|
Cyclone87
|
Nov 27 2005, 01:39 AM
|
|
|
QUOTE(wtm0325 @ Nov 27 2005, 12:08 AM) not 1gb stick perform better, it's becoz s754 cpu is built in with single memory controller, it's cpu limitation... if u put 2 stick 1gb oso same, htt might be limited But if both ram is identical, 2 stick will be fine. I used to have 2 stick of crucial. B4 i sell 1 off, i using both to run at 337HTT for my daily usage. After i sold it and get a BH6, it seem not that stable. |
|
|
|
|
|
wtm0325
|
Nov 27 2005, 01:53 AM
|
|
|
normally 2x double sided 512mb cant run well at s754 mobo, mr zorro got 2x tccd oso but only can hit high with 1 stick  |
|
|
|
|
|
soulfly
|
Nov 27 2005, 08:38 AM
|
revving towards 10,000 rpm
|
DDR600 @ 1T with 2x512MB TCCD?  Source: Ministry of OverclockingThis post has been edited by soulfly: Nov 27 2005, 08:38 AM |
|
|
|
|
|
sidewinderz
|
Nov 27 2005, 06:22 PM
|
|
|
hmm...was just wondering....if my comp hangs while i'm in a middle of something and it doesnt restart, which part of my system is unable to support the clock speed? the ram or the processor?
|
|
|
|
|
|
Vtec(Rock)
|
Nov 28 2005, 01:53 PM
|
|
|
erm...my system will boot at 330.133 divider but when i lod in window it will reboot.Damn.can't stale.anybodyc an send me the NF8 setting over 330HTT?Wtf.
my best result 37sec super PI 1M.i stick back 318htt with 166 Divider.ram timing at 3--4-4-8
This post has been edited by Vtec(Rock): Nov 28 2005, 07:37 PM
|
|
|
|
|
|
Vtec(Rock)
|
Nov 28 2005, 06:11 PM
|
|
|
will do VDD mod for the NF8 soon.push the memory to 3.3V soon
|
|
|
|
|
|
soulfly
|
Nov 28 2005, 08:16 PM
|
revving towards 10,000 rpm
|
what psu are u using vtecrock?
i think the max u can run is 3.2v
if you want to run 3.3vdimm ... u might need to crank your psu +3.3v rail to 3.4v
|
|
|
|
|
|
sidewinderz
|
Nov 28 2005, 08:27 PM
|
|
|
QUOTE(soulfly @ Nov 28 2005, 08:16 PM) what psu are u using vtecrock? i think the max u can run is 3.2v if you want to run 3.3vdimm ... u might need to crank your psu +3.3v rail to 3.4v how do you mod it? |
|
|
|
|
|
soulfly
|
Nov 28 2005, 11:26 PM
|
revving towards 10,000 rpm
|
mod it internally... using adjustable pot
anyway... your butterfly 480w is active pfc or non-pfc? if non-pfc.... you can adjust the +12v and +3.3v rail because there are adjustable pots inside the psu on the circuit board. The +5v rail however, will increase together if you tune the +12v rail.
|
|
|
|
|
|
Vtec(Rock)
|
Nov 29 2005, 12:08 PM
|
|
|
i just run Tsunami Purepower 400W
|
|
|
|
|
|
antonio
|
Nov 29 2005, 04:59 PM
|
AMD Phenom II & Intel i7 Overclocker
|
|
|
|
|
|
|
sidewinderz
|
Nov 29 2005, 05:04 PM
|
|
|
QUOTE(antonio_zth @ Nov 29 2005, 04:59 PM) wow...are those identical rams? |
|
|
|
|
|
antonio
|
Nov 29 2005, 06:33 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(sidewinderz @ Nov 29 2005, 05:04 PM) wow...are those identical rams? yerp...dual pack....512x2 = 1GB   This post has been edited by antonio_zth: Nov 29 2005, 06:46 PM |
|
|
|
|
Quote
0.0809sec
0.29
6 queries
GZIP Disabled