Outline ·
[ Standard ] ·
Linear+
Sempron64 2500+ , 2800+ OC tests
|
soulfly
|
 Nov 14 2005, 04:14 PM
|
revving towards 10,000 rpm
|
QUOTE(ayiesz @ Nov 14 2005, 03:40 PM) just got my sempron yesterday. no time to play with it yet. 2800+ DFI infinity nf4x 1024 D43 MSI 6600GT diamond i've never oc'ing any amd so far. how far u guys think i can go with stock cooling? btw its said that the pci is locked with processor fsb, that means if i change the fsb my pci clock also will change? just make sure that u set the pci-e clock to 100Mhz (or 101Mhz if u're running very high fsb)... do not put AUTO |
|
|
|
|
|
antonio
|
Nov 14 2005, 06:21 PM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(Hungry_Wolf @ Nov 14 2005, 03:41 PM) @Anthonio ur dfi board vdimm max is what? 3.2v? The DFI Infinity nF4X 754 = 3.2v  |
|
|
|
|
|
sidewinderz
|
Nov 14 2005, 09:36 PM
|
|
|
sigh...every1 on DFI...hands itchy la..haha....think my next board will be DFI...antonio....can give discount??hehe...
|
|
|
|
|
|
ayiesz
|
Nov 15 2005, 09:24 AM
|
|
|
i got delayed booting into windows. just before the logon screen, right after the windows logo with the blue bar. it goes black for a few seconds. why is that happening?
|
|
|
|
|
|
antonio
|
Nov 15 2005, 09:32 AM
|
AMD Phenom II & Intel i7 Overclocker
|
QUOTE(sidewinderz @ Nov 14 2005, 09:36 PM) sigh...every1 on DFI...hands itchy la..haha....think my next board will be DFI...antonio....can give discount??hehe...  :P:P:P:P QUOTE(ayiesz @ Nov 15 2005, 09:24 AM) i got delayed booting into windows. just before the logon screen, right after the windows logo with the blue bar. it goes black for a few seconds. why is that happening? ....try setting back all to factory defaults then try and overclock back again...if while in stock settings also litdat it means corruptions has occured...  |
|
|
|
|
|
ayiesz
|
Nov 15 2005, 09:40 AM
|
|
|
QUOTE(antonio_zth @ Nov 15 2005, 09:32 AM) :P:P:P:P ....try setting back all to factory defaults then try and overclock back again...if while in stock settings also litdat it means corruptions has occured... what kinda corruption? windows? stock setting also like that    btw what is HT multiplier for? This post has been edited by ayiesz: Nov 15 2005, 10:08 AM |
|
|
|
|
|
soulfly
|
Nov 15 2005, 10:58 AM
|
revving towards 10,000 rpm
|
FSB x HT multiplier = HT bus speed
for nF4, HT bus speed should maintain below 1000mhz
for nF3, HT bus speed should maintain below 800mhz
This post has been edited by soulfly: Nov 15 2005, 10:59 AM
|
|
|
|
|
|
ayiesz
|
Nov 15 2005, 11:12 AM
|
|
|
if i'm running 270 x 8 can just let it stick at 4x HT or should i lower it to 3xHT?
|
|
|
|
|
|
sidewinderz
|
Nov 15 2005, 11:20 AM
|
|
|
hmm...
calculate...270x3.0 = 810mhz....that 1 is a no no...try lowering it down to 2.5x or 2x
|
|
|
|
|
|
soulfly
|
Nov 15 2005, 12:13 PM
|
revving towards 10,000 rpm
|
QUOTE(sidewinderz @ Nov 15 2005, 11:20 AM) hmm... calculate...270x3.0 = 810mhz....that 1 is a no no...try lowering it down to 2.5x or 2x dude.... he's on nF4 ler 270 x 4 = 1080MHz .... should be still okay if you don't have any problem with stability or else lower the HT multi to 3x |
|
|
|
|
|
Hungry_Wolf
|
Nov 15 2005, 01:12 PM
|
|
|
QUOTE(soulfly @ Nov 15 2005, 10:58 AM) FSB x HT multiplier = HT bus speed for nF4, HT bus speed should maintain below 1000mhz for nF3, HT bus speed should maintain below 800mhz ht bus speed = fsb???  |
|
|
|
|
|
sidewinderz
|
Nov 15 2005, 01:17 PM
|
|
|
QUOTE(soulfly @ Nov 15 2005, 12:13 PM) dude.... he's on nF4 ler 270 x 4 = 1080MHz .... should be still okay if you don't have any problem with stability or else lower the HT multi to 3x oopps..my bad...hehe... QUOTE(Hungry_Wolf @ Nov 15 2005, 01:12 PM) ht bus speed = fsb??? yea...you're right...just that on intel, its called FSB |
|
|
|
|
|
soulfly
|
Nov 15 2005, 02:31 PM
|
revving towards 10,000 rpm
|
QUOTE(Hungry_Wolf @ Nov 15 2005, 01:12 PM) ht bus speed = fsb??? actually, no. all AMD K8 fsb = cpu clockspeed the 'FSB' term used in bios is just used as a 'variable'.... it's not the same as fsb in intel or other architecture |
|
|
|
|
|
Austin123
|
Nov 15 2005, 02:34 PM
|
|
|
QUOTE(antonio_zth @ Nov 14 2005, 12:47 PM) still benching to find swwet spot... btw here it is CPU 1.475v NB 1.6v PCIE 101mhz MUSHKIN 4400 Black Level LL2 @ TCCD 2.5 4 4 8 = 2.9v oh man.. u guys gile sial.. processor cheap but RAM freaking expensive..  |
|
|
|
|
|
soulfly
|
Nov 15 2005, 02:37 PM
|
revving towards 10,000 rpm
|
hehe.... TCCD is the best for Sempron when paired with mobo with low max Vdimm |
|
|
|
|
|
Hungry_Wolf
|
Nov 15 2005, 03:18 PM
|
|
|
QUOTE(soulfly @ Nov 15 2005, 02:37 PM) hehe.... TCCD is the best for Sempron when paired with mobo with low max Vdimm issit? any value ram using this chipset? |
|
|
|
|
|
soulfly
|
Nov 15 2005, 06:40 PM
|
revving towards 10,000 rpm
|
No... because the production cost is expensive. TCCD is strictly for performance RAM. anyway.... just want to share a joke. someone trying to be clever http://forum.cari.com.my/viewthread.php?ti...page%3D1&page=2as far as i know, there is no sempron 3500+ priced at RM300 available in the market, and he refered to Lowyatt Plaza. heck... AMD was never produce it yet.... and he kept arguing with me that such thing does exist  |
|
|
|
|
|
davidletterboyz
|
Nov 15 2005, 08:28 PM
|
|
|
^^
Haha, he even asked u to jump down from building. LOL
Anyways, i think he needs a new pair of glasses.
|
|
|
|
|
|
low yat 82
|
Nov 15 2005, 08:36 PM
|
|
|
ayo.. i think he is d one who noe a little and then brag like he noe a lot...better tell him to google around before wan to brag  |
|
|
|
|
|
songhan89
|
Nov 15 2005, 09:13 PM
|
|
|
That fellow lives in kampung and never been to lowyat plaza be4 i think . Anyway, would like to ask you guys a few questions: 1.How far can a 2500+ S754 clock with a pair of value ram? DDR400 Kingston ones. Don't have to be accurate but just share ur experiance will do. 2. Is Abit KV8Pro the mobo to go? If budget user i mean..... Thank you very much .  |
|
|
|
|
Quote
0.0211sec
0.67
6 queries
GZIP Disabled