in DINSTER Bulk's there is the set of rams selling about 7++....but maybe it is unlike my rams....same model same chip..diffrent revision...according to ROBYNCOM...

2500+ mine 345 can bench all (sandra,PI,everest,Quake4, Aquamark,3Dmark...but cannot prime only...Mebbe vcore not enough as i'm pumping standard voltage....


well to get the best...all must be the best...


Mobo limitations maybe...but try find a solution by looking for bioses upgrade...

i divide the RAM to 133Mhz already, how to loosen it up?

2-2-2-6 <-small value = tight
3-4-4-8 <-large value = loose

Najmods is ram problem, he can did 350htt before he changed his ram

ur htt limits to 250 only inside bios huh?

This post has been edited by wtm0325: Nov 10 2005, 12:08 PM

hi sidewinderz,
my msi k8n v2.0 bios setting for vcore is 1.55V as the next step after auto, how come there is no 1.45 or 1.5V, how about you msi platinum mobo?
is there a bios upgrade i shud be considering?
err, is there a windows based flash for mobo bios, rather than using floppy disk, i dun hav a floppy drive
last time i wanted to flash my gc to enable temp monitoring, has to pinjam my office floppy drive:)

This post has been edited by kimi: Nov 10 2005, 04:00 PM

but the price of 2500+ and 2800+ only RM70 different.. but get extra 200Mhz..

90 according to PCzone quotation this week....

true getting 2800 is better if the price diffrence is affordable....

but juz say like my 2500+ week xx can go selambederk 345 HTT stock everything, if i want the same like performance i should find the same cetain week also...which is kinda hard for low end cpu's which usually ends up in an ordinary Joe's PC...

antonio_zth, i just open a thread wanna trade my proc with 2500+, if interested pm me

There is some 2800+ able doing 345HTT at 1.55v. Mine on stock is 340HTT. Seriously that 2800+ always outperform 2500+ by 300-330 mhz after Oc. 300mhz is around 400-500 PR rating. I wonder why amd duwan release 3100+ s64. Imagine if that 1 also outperform 2800+ by 300mhz.

There is 3100+ S64.... it's just the local shops (or maybe local distributors) don't have them in stock.

hehehe..thanks for the offer..but right now i'm runing 2500+ 2500mhz sempron...hihihih

there is sempron 64 selling in pczone..

3100+ = RM395
3400+ = RM495

pczone ar? i heard that shop dun let you see the processor stepping wor..last time when i wanna purchase my processor, they wont let me see the stepping...

maybe they think it would need one to open the box to see the stepping?

bcoz most salesperson in pc shops i found quite lousy, even the boss are also lousy at most times, they only know making money.

see thru the box also can see already mah

wow..357Mhz X 7 = 2500Mhz.. superb.. wat RAM r u using?? how much voltage u put in ur RAM n MB??

This post has been edited by Austin123: Nov 12 2005, 02:06 PM

still benching to find swwet spot...

btw here it is

CPU 1.475v
NB 1.6v
PCIE 101mhz

MUSHKIN 4400 Black Level LL2 @ TCCD 2.5 4 4 8 = 2.9v

what stepping is it antonio? 0528UPMW?

0538...i cant remember the rest...hihihi..didnt write when installing...

just got my sempron yesterday. no time to play with it yet.

2800+
DFI infinity nf4x
1024 D43
MSI 6600GT diamond

i've never oc'ing any amd so far. how far u guys think i can go with stock cooling? btw its said that the pci is locked with processor fsb, that means if i change the fsb my pci clock also will change?

@Anthonio
ur dfi board vdimm max is what? 3.2v?