dude... i want to know what is your temperature for your 2800+ at 345x8 running full load?

can only run superpi 1M ... cannot prime stable

already increase Vagp and Vchipset?

i think, you should leave the chipset at default voltage and put Vagp to 1.6v instead

that's the reason why u cannot 3d stable

Vagp increase is not because gpu unstable or not... it's just the way ppl usually get more stability when running high HTT/FSB

yup... DFI got 2.5x but I never use it before. All these while I only use 3x or just put it AUTO.

kenny79,

with a 2600/2800 ... your mobo will take u up to 2.4ghz max
a 3000/3100 will take you up to 2.7ghz max

if they have sempron 3100+ for sure the old stocks of s-754 athlon64 not laku anymore

now trying so hard to run 338htt with 9/10 divider (ram at DDR600). my 300htt 1/01 (no divider) extra memory timings settings cannot be used to run divider... haih.... very pening kepala.

actually i can run windows stable... but i just want to make sure my setup is memtest and superpi 32m stable

already

i think the problem is related to the Tref timing .... need to try one by one i think... which will take a lot of time and patience

Actually DFI have extra memory timing option in the bios for you to tweak the ram further. That's why DFI users often get not only high HTT, but also high DDR speeds.

Now problem solved, it's just that I'm not running my cpu fan at full speed
Maybe it's just the processor gotten a bit hot, that the memory controller got stupid a bit. But a little tweak also has been done.

Memtest stable all the way

For those mobos without extra memory setting... u guys can use the A64Tweaker.

I've heard somewhere... either DFI or nForce4 chipset which dun like Hynix chips.... forgot already.

This post has been edited by soulfly: Sep 26 2005, 08:11 PM

can run 3dmark or not? or games perhaps?

maybe u need to play around with the HTT voltage

my mobo don't have that option, so u have to try it yourself

hmm... I got a problem now. Having hard time getting my setup to get Prime/OCCT stable.

I know my processor is capable of running 2704MHz with my TCC5 running at low speed, 5/06 divider for example. Tested to be Prime stable for an hour two, OCCT stable, and can finish SuperPi 32M.

My rams on the other hand, are capable of running DDR600 at 2.7V (1/01) and 2.8V (9/10) passes hours of Memtest with the right timings.

And now I'm running the Sempron at 2704MHz with 9/10 divider (TCC5 at 300MHz), which means I'm applying all the maximum result for both my CPU and RAM. Memtest86 and SuperPi 1M is stable, but cannot get SuperPi 32M/OCCT/Prime stable. Any idea what else should I tweak? I think it's related somewhere with the RAM extra configurations because of the divider.... but not sure which setup should I play with.

This post has been edited by soulfly: Sep 27 2005, 11:54 PM


Attached thumbnail(s)

Guys, post your SuperPi 1M scores to the SuperPi sticky topic. I've got our space to post results there.

Use this SuperPi mod....


Attached File(s)
 Super_Pi_mod_1.zip ( 621.95k ) Number of downloads: 10

default chipset voltage should be 1.6v
default cpu voltage for sempron is 1.4v
default agp voltage is 1.5v

Post your SuperPi 1M results here guys : http://forum.lowyat.net/index.php?showtopic=105812

don't forget to include screenie showing SuperPi and 2 cpu-z showing cpu and ram.

also include your ram and chips

best if can include a64tweaker screenie also.


smokey : Sempron64 2500+ costs below RM210 at lowyat plaza. On the pricelist they don't show Sempron64 because the marketing name for Sempron is Sempron only... without 64. All the latest stocks are with 64-bit.

This post has been edited by soulfly: Oct 1 2005, 12:35 PM

Here u go.... use Winflash to flash the latest BIOS

by the way... it's Palermo E6.... not Venice.


Attached File(s)
 NF3LD623.zip ( 330.18k ) Number of downloads: 8

if everything at default/auto... my voltage is around 1.3v, less than 1.4v... which is during idle

at full load... average reading around 1.37v-1.39v, and sometimes it spiked to 1.4v-1.41v. i think my board got bad circuit resistance.

different board sometimes got different reading because of circuit resistance. try check the volt while running prime.

next time post to superpi thread la dude. got ranking there...

http://forum.lowyat.net/index.php?showtopic=105812