nf8 din have 150. btw, i tried 133 divider, but when boot to windows, check wif cpu-z, its back to default speed; 200 x 8.0 ? y?

Guys, need some help here. Just finished playing, tuning, finding the best for my s64. Quite satisfied wif 315 HTT. Using divider 166 3-4-4-8-2T, i cant get 3d to stable. Not even 3dmark. testing wif 248 3-3-3-5-2T, i can play any games. Increasing the vAGP oso didnt help. Increasing the agp latency to 67, oso no good. Is there any thing i miss-out to change? My temp, quite suspicious la. at 2.5G oso 30c idle 41c prime load. Using 1.58v on vcore. wat ur guys temp? Is it s64 low on temp?

i can sp2004 for 3 hours, superpi oso can finish. dunno y in 3d cannot use divider. well, back to 1:1 onli choice.

a64 tweaker can use on s64 oso? dunno that. n my mobo, nf8-v2. cannot set in bios.

can u guys give at least safest timing for a64 tweaker for guide?

This post has been edited by satanhead2003: Jan 30 2006, 09:09 PM

sorry boss, dunno that, newbie. . k, what setting should i use on a64 tweaker?

" see which suit u "
n this will mean? will run sp2004 overnight, tonite. will post the result tomolo. Thanks guys, SuperPC. Really Appreciate It.

i wonder y i cant use x2 ldt multi. doesnt boot. n, how to determine ram or proc limit? bcoz, i manage to boot to windows at 335HTT which is 26xxMhz, wif 1.56v. but not stable. running mem divider at 100mhz. BSOD when opening photoshop CS2. Does dis mean my proc hit the wall oledi or my mem not good?

This post has been edited by satanhead2003: Feb 9 2006, 11:30 AM

BH-5? vdimm onli 2.8, dude.

err.... wanna ask bout nforce3 chipset. how hot can it take, i mean the max temp for the chipset? 1.6v safe for s64 ah? idle temp 35c full load 45c.

sorry, kinda ngantuk oledi..... 2 question actually.

1. wat the nforce3 chipset max temp?
2. 1.6v wif 35c idle 45c full load, izzit safe [ dis is proc temp ]?

heheh.... yaa.... keep on thinking of venice...... can afford it then go for palermo... sorry... wc? heheh.... just modded bigwater there.... not much...

yea... sure not accurate.... 45c oledi +6c from mbm reading.

guys... wanna ask something....

Mine is s64 2800+. Using NF8-V2 mobo. maxed out at 332. But the problem is, the temp. Running it 2.4G on 1.475 n temp is idle 35c load is 43c. I'm on wc n vcore is 1.66v. I know its too high ( IIRC 1.7v is official amd max vcore ). The temp still the same, 35c idle full 49c.

2.4G on 1.475v
------------------
Idle = 35c ( mbm/speedfan/everest/abiteq read it as 29c, but i dont trust it. added 5c to mbm reading )

Full Load = 43c ( 8 hours prime )


2.611G on 1.66v
-------------------
idle = 35c ( same as above )
full load = 49c (8 hours prime )

Questions
------------

1. Shouldn't increased in vcore resulting higher temp on idle state?

2. I knew s64 max temp is 69c, so my full load on 1.66v is onli 49c. izzit still safe for me to pump more vcore? let say until the full temp around 60c.

This post has been edited by satanhead2003: Mar 24 2006, 03:40 PM

Thanks guys. So, how much is safe? 1.55v considered safe?

Guys, just want to share my experience here.
My mobo is nf8-v2 (great mobo, onli lack vdimm) n my ram is bt-d43 ( which oso great in sc A, not so good in sc 754 ). Thing is, i cant go more than 250 ( goes up to 265 in sc A 2.5-2-2-11@1T ). So using divider 166, i'm able to hit HTT 308 n ram already reach 248 ( 249, bsod ). I played wif Athlon64 Tweaker n found out I can set ram divider there. So, i test it with divider 150. Crank up the HTT using clockgen, up to 325 HTT. All this i achieved wif 1.55v on vcore. Superpi 4M, 8M, 16M and 32M finished without any hitch n able to score superpi 1M wif 34.730s. So, my guess is, NF8 is a great oc mobo, but lacks of feature such as vdimm, 0.5 LDT Multi n 150/183 ram divider make it second choice in it's class among oc'ers.

y not set it x3 using Athon64 Tweaker?