not seen here, tryx say he wants buy import from other country also....

i saw in other shop the CDI or something super expensive....

in LC is it will be same as kawahara K3 or yamaha original cam s6, this 2 330 higher than normal...

depends pomen, the pomen i do, recommend use back for LC bcos special size....

some issue la like mine block not so compatible and cold start, mine now dunno wats, 1 funny prob, more easy start, evening 6/7 pm hard to start....  

Bearing just jek out and put back, this depends pomen how gooding...

LOL you put bigger block sure ok de but with your original block u must pray to god liao and hope nothing go wrong if not u keep open engine and pasang engine and buka carbs and pasang carbs just to get a suitable setting. Did u hear what new guy say? 300 Degree cam on FZ block When carry ppl time got problem so can u imagine 330 degree on a even smaller block ma? High cam good on High RPM but if ur block too small than u sacrifice alot alot of your low RPM and your mid RPM so dont too high ba.. Those 330 Degree cam not little kids toy they mean for drag race use.. All they block size is super huge just only to sprint at a road not more than 1 KM. They no play with low RPM all the way high RPM LOL

Wah you all so fast change samurai liao, only left me...
Yeah i saw before the samurai tyre very wide, 80/90 is like 90/80...
MPS tyre really so paria ah? Die lah like that, my rear tyre still using MPS, still got a lot bunga...
Yes i agree with you, when your emergency brake the back will skid one, i kena twice before 
You also went tokico to change your samurai? Near sunshine there one right?

Storm is call highpower 210, neutral gear 13k RPM.

Tat day do dyno, so 4th gear can reach 11k RPM...

6k to 8k, ok ar but below 4.5k, hmm a  bit crap la but wonder who rides this range...  

4k below like 40 to 50km/h

If 1 to say quite gooding liao, but now got hard start during evening, morning no prob...funny...

Today happen again, then will rejet lo this sat...

Some say is soft compund...
For my case, MPS needs sometime to warm up before it becomes soft, for my case, need around 10 mins then only i feel the tyre is soft 

i like the block cant cope with fuel come in, must slow wait awhile until 6k then smooth d...maybe shud rejet and got hard start means start until batt lo then kickstart 10x only can jalan...

Today finally changed front tyre at Tokico...
Brand : Swallow Samurai
Size : 70/90
Damage : RM70
I feel the price is resonable, but the worker eh face like people owe him 1 million 

Here are the pirctures:

Front
As bro TryX said before, the tyre itself is quite wide compared to others...
[attachmentid=2317267]

Side
Quite thin, the tyre is quite round, good for cornering
[attachmentid=2317268]

Wordings
There are "Samurai" wordings on the tread, i feel this is useless because sooner or later these wordings will hilang, i rather the manufacturer remove the wordings and make the price cheaper
[attachmentid=2317269]

Diamonds
Yes... it has diamonds at the side of tyre, it copies maxxis 3D mia design, knn...
[attachmentid=2317270]

Review:
So far i haven't really tested the tyre.
I fell this tyre is meant for corner mia kaki, during the corner, when you down your body a bit, this tyre will automatically down more for you.
Just now 1st time corner nearly sleep on the floor 
Overall this is a gooding tyre 
The rest of the reviews i will leave them for bro TryX and Patrick 

Not only pipe, i think need to set the carb also. 

For me i prefer chinese foreman, cause my malay sucks, later scare don't understand what the malay foreman says... 
Kam sia kam sia, thanks to you and Chuan lor 
Aik you haven't change ah? I thought you dah tukar...
The boss said 80/90 no stock liao, only left 70/90 and 90/80 nia...
Home sweet home 
Your group sure got girls one right?

kalau rm95 jadi apa ???   

any1 can plan to install this..? for any1 who got facebook.. the one post this pic is this.. randomly i found this dude wan.. and u guys can hover ur mouse to 'Malam Yang Indah!!' .. enjoy some pic.. XD

https://www.facebook.com/media/set/?set=a.1...100000165880058

u click the guy wan album link i posted.. then u go find his photo album, titled 'malam yang indah'.. understand..?

Starting last week my motor got the "tik tik tik" sound, very anoying, so today went to NBH there to service my motor soon bian open engine to check the tik tik sound.

Hera are some pictures:

Open my motor mia clothes 
[attachmentid=2319273]

For those who want to know where is the radiator mia fan, it is behind the radiator itself:
[attachmentid=2319274]

Open the engine cover, found the culprit !!
Tighten the valve mia kaki = problem solved, no more tik tik sound 
[attachmentid=2319276]

Also found one of the pipe (for air mia, black color mia) bocor, so replaced the pipe.
Sorry didn't have chance to take pic, the bangali mia hand too fast replaced the pipe liao...

Lucky the valve and spring still OK, if not need to spend more...
Total damage for today : RM 35 (adjusting the valva mia kaki), + RM 5 (air mia pipe) + RM 2 (labour cost for changing EO).

After changing EO + tighten valve mia kaki = my bike now gooding again 
Just now saw one new LC want to play with him, bu he ride slow slow je... 

NBH ma.... LOL... but what to do.. in Penang island.. only his skills one of the best... LOL.. so he pandai.. he charge banyak lo...