bro, i think some where not right, u better follow alexei advise go rejet or check plug or c your ignition...

can say tat but it cos the surface uneven if u feel it wit ur hand....

circumference is jejari, use the formula u learn in additional maths chapter 1 formula which 2 x pi x j = circumference

or pi x d= circumference, D=2J, pi =3.1423 remember ?

silinder volume (m3) = pi x j square x t, (pi x j square = bore, t = stroke) CC= 10-4

1 inch = 2.54cm = 25.4 mm

correct me if i wrong....

the circumference use a measure tape to get the size, then use the formula above to calculate the diameter...

just for your information.... shud be the same i think....

i using comet 90/80 indo tire also...RM95...

the Karak Highway, the lights is white color, if brighter can have ferari race d...

@thianz and @shyan

other Fridays u all go, i consider follow..

This Sat i goin rejet carb, need go early bcos pomen bz when at lunch till evening...

thanks,bro..just remember....

the carb i personally hav not c the jet myself, it is possible the previous owner used smaller jet is bcos my bike 1 full tank when i just bought can go 200+ km, i quite amaze actaully bigger block so efficient but now around 170+ km...

rough calculation previously is 1 litre about 50++km, now is 1 litre 40++km

there is old saying, if ur bike/car not high consumption, it is not fast. Is this true nowadays?

@thianz,

i ask the pomen at storm, i ask him whether RXZ carb u good to use, he said the response slow or lag or heavy, is this true? anyone here or ur fren got use this carb on LC?

Since i may hav the carb, i better not waste it....

In the end, he said NSR, TZM and others is much better? Is this true just the setting need to be good?

Just curious......

This post has been edited by NewGUY: Jun 22 2011, 09:38 AM

bro, any idea....

the carb i personally hav not c the jet myself, it is possible the previous owner used smaller jet is bcos my bike 1 full tank when i just bought can go 200+ km, i quite amaze actaully bigger block so efficient but now around 170+ km...

rough calculation previously is 1 litre about 50++km, now is 1 litre 40++km

there is old saying, if ur bike/car not high consumption, it is not fast. Is this true nowadays?

thanks, bro

i m quite happy since a modded bike, if after mod more still get this good, i ll be more happy....

urs now how many km? tak da 140 km meh?

In housing less than 80km/h on GPS

On highway around 100km/h on GPS

I seldom sprint with ppl at traffic light, try to less drop gear and slowly move to fast just turning the throttle (here u need patient a bit)

RPM around 4k to 7k....

Anyone need prove i can upload all the data i collected....

Bro, full tank how many Km?

@aaronlc135, i think penang there more hills, natural shud higher full consumption...

here the land more flat.....

@ who bought Rextor V3 here? is it tryx?
is it adjustable and got 2 place to adjust?
Here,storm saw price tag RM420...

And i wonder why so small the CDI compare with others?

In LYN V4, someone i forgot dunno who said that BRT kenot use with big plug coil and will cos the CDI damage...

Rextor or BRT is racing CDI?

i got something on this date, already being book 1 month ago...

how is the 111% or 112% speed?

I got some class to attend just happen tat sunday...

Mpne still less maybe around 800km...

the needle not correct, mine show 10500 rpm
u got try 111%, wat speed?

u got mention ur front tire is 90/70 is it?

since u change tire, pandai-pandai calibrate again....

If u 1 correct RPM u can change it to digital and c but u kenot c speed...

u 1 lighter put 80/90 at back more light....

I check on FZ block on the net, the material claim by Yamaha last 50000km, very lasting...

Main bearing 6305, per piece is about so far can get is 90 to 150 for FAG fiber highspeed bearing depends location, (not include), here hav 2 piece....
Here, LYN market got ppl selling FAG fiber highspeed bearing for 70 per piece. FAG is German bearing, if not wrong.U can try Koyo highspeed is normally 70 at shop...

According to the part catalog, transmission or gear box got 4 piece, i ask pomen, he say 3 (dunno why), each here is 90 to 120 depends on location,(not include)...

Someone review in motomalaya or somewhr, u use all the bearing 15T/37T 415 still light...

Rough calculation on bearings and about 600 if plan change bearings, maybe 200++ (gasket etc), not yet other block and piston, cam, valve, valve spring and etc

Gather more info, if the bike still running,just run it carefully.then plan the above, not cheap u know....

Others anything to add???

bro, wat happen to ur wiring?it like few days d..

is it bcos of the RPM wiring?

Around there la, why?

Just for your information,Anything u test, better on straight and flat road...