Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 PROTON SAGA BLM & FL CLUB V13

views
     
NewbieBetta
post Jun 14 2011, 10:22 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



how come your saga come with ecotint?mine doesnt..so i opt for raytech..damn exp..btw my saga do come with a tint..but i dont see any ecotint warranty card
NewbieBetta
post Jun 16 2011, 10:46 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(jerrymouse @ Jun 16 2011, 10:24 PM)
Just wanna share with u guys =)

Got my car to the Puchong SC, one problem solved (well not 100% bcz I still can hear some tok tok sound but not as bad as b4) which make me worry free now hehe. The mechanic told me it was the Fender which causing the problem, thus knocking the tyre and causes some 'knocking sound'. However the pedal vibration is still there, so 50% of the total problem still there but I am glad that this SC can rectify the knocking problem where the others SC I went couldn't. I will go back to this SC for sure =) and their service is good 9/10 ( one lady come to me and ask me if I am thirsty, she then makes some milo and give it to me personally, first time I see such service) 2 thumbs up.

Not to forget u guys here in this forum, thanks for the help and heads up, u guys rockzz!!!
*
may i have the exact address for this puchong SC?
NewbieBetta
post Jun 17 2011, 06:44 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



my SA gave me raytech voucher,so far so cool..security film lowest spec after discount voucher is RM600, just 60% heat rejection on all side include rear & front..its already not bad.

75% or 85% is even better I can say.
NewbieBetta
post Jun 18 2011, 12:49 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



just get my 1st fuel consumption, pump in full tank and left 1bar without low fuel indicator light up, manage to get 307km, auto.

I dont keep my rpm below 3k,i rev when necessary up till 4.5k~5k
NewbieBetta
post Jun 18 2011, 09:58 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



city 60% highway 40%,everyday jam puchong-sunway toll

This post has been edited by NewbieBetta: Jun 18 2011, 09:59 AM
NewbieBetta
post Jun 19 2011, 12:55 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



saga FL 1.6 is proton ride & handling

saga FL 1.3 is lotus ride & handling

must give feed back on any diff for FL 1.6 owner
NewbieBetta
post Jun 19 2011, 09:50 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



some freaking moron cause my driver side door dented alittle..damn, was washing my car & notice a little dent on the door..damn heart pain
NewbieBetta
post Jun 22 2011, 02:10 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



my SA asked me to do my 1000km service at a SC nearby serdang because I bought my car from seri kembangan outlet is this necessary? will it be just he wanna bring business to that shop? because if im going to that shop i'll receive a free umbrella..LoL

I hope to do it at puchong branch,nearer.
NewbieBetta
post Jun 22 2011, 08:15 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(pravred @ Jun 22 2011, 08:06 PM)
yea bro actually wanted to soundproof but too expensive and some cheap basic soundproofing i doubt will satisfy me much so decided to go for this setup since it's cheap and satisfies my music craze.i realized i tend to drive more relax nowadays enjoying my music  biggrin.gif
*
how much is sound proofing? where did u went for survey?
NewbieBetta
post Jun 22 2011, 09:06 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(pravred @ Jun 22 2011, 08:32 PM)
went to brothers they quote around 800-900 for the floor,4 doors and if got remainder add to the car trunk.
ask one of the lyners he quote Rm880 and that material just OEM not the STP.Besides that i found the autofoam they use a different method of soundproofing and guranteed good insulation but the price super expensive but it is overall the car i just did an estimation according to their price and it came up to 2.9k. biggrin.gif
*
hmm..i got think of going to EA for them to test drive for quoting on bonnet & fender & floor insulation,firewall i dont think i will do it since dismantling dashboard will void proton warranty.

not sure how much it will cost for EA to install STP. Most crucial part is the bonnet. hmm.gif

This post has been edited by NewbieBetta: Jun 22 2011, 09:06 PM
NewbieBetta
post Jun 23 2011, 01:59 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



may I know the diff between 2S & 3S service centre?my car are nearing for 1st 1000km service.
NewbieBetta
post Jun 23 2011, 02:03 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(jo3y30 @ Jun 23 2011, 11:27 AM)
Morning everyone,
I guess i m the 1st owner for the Saga FL 1.6.
Got it for 2 weeks oredi.
My FC reports. 1st week pump rm50 of RON95=260km. 2nd weeks pump rm50=245km. is this good for a 1.6?
*
saga FL 1.3 AT here,3rd week driving..1st pump = 300km, 2nd pump = 250km RM50 RON 95
NewbieBetta
post Jun 23 2011, 02:10 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(coolkwc @ Jun 23 2011, 10:38 AM)
BLM crucial soundproof part is

1. Wheel arc,
2. Fender,
3. Front Door
4. Floor
5. Firewall.

By doing 1st 4 properly, you can reduce engine and road noise effectively adi.

Bonnet soundproof effect can say equal to NONE. Don't waste ur hard earn money there.
*
why will bonnet soundproof will make no diff? btw if i would like to insulate engine noise, places i should insulate will be firewall & bonnet?
NewbieBetta
post Jun 23 2011, 08:10 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



hey,i remember someone in here a forumer recommend use fully synthetic earlier and the 1.3L engine will do fine..

but some used semi synthetic for some time & change to fully,they report that their engine are not doing well with it..

who is that forumer again?
NewbieBetta
post Jun 23 2011, 09:56 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(zeone @ Jun 23 2011, 08:17 PM)
IMHO there's no reason why a change fr semi to fully synthetic engine oil shld cause any prob. Unless, of course, the viscosity/SAE grade is changed, too. wink.gif

Me planning to change when service interval is 10k Km...hehe...cos only then it wld b worth using Fully Synthetics! icon_idea.gif
*
why does service interval 10k is worth the use of full-syn? why not 5k?
NewbieBetta
post Jun 25 2011, 11:39 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(mysoo @ Jun 25 2011, 10:55 PM)
Just now I nearly hit the car in front coz can't hit the brake in time. I found saga fl brake pedal abit too high.

Could SC adjust the brake pedal height ?
*
true, any feedback from other user..but starting to get used to it already..need apply more force
NewbieBetta
post Jun 27 2011, 06:45 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



this morning heavy rain during my way to work. after work i notice water vapour inside my front lamp. Can I claim warranty on this? 1st time saw this happen.
NewbieBetta
post Jun 27 2011, 07:23 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(MR_alien @ Jun 27 2011, 07:16 PM)
yes...if under warranty...take back to SC
*
so if this thing happen, confirm the lamp its not tightly seal ? just done my 1000km service aiseh.. doh.gif
NewbieBetta
post Jun 27 2011, 11:14 PM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(MR_alien @ Jun 27 2011, 07:29 PM)
hmm...not sure
only some members here have encounter this problem
some dissapear after few hours and never happened again
some prefer to claim at SC
some want to claim but the problem dissapear be4 they go SC
u can leave it 1st..see how...if it dissapear...thn can't claim...your car just maybe new
*
for my case it slowly fade away the water vapour inside my front lamp, so if only the water get trap inside without disappearing can do claim when reach SC. just hope it wont happen again..
NewbieBetta
post Jun 28 2011, 12:36 AM

The Sexy Man
*******
Senior Member
3,706 posts

Joined: Aug 2005



QUOTE(rajivshm @ Jun 27 2011, 11:35 PM)
no wonder...

btw, anyone using leather/pvc/pu seat covers?
feedback and price pls.. thanks
*
pvc from brothers RM280 include installation,my main purpose is to prevent stain on my cushion,so not that care on the quality & heat. But so far im satisfied with the quality & heat was minimum due to using better tint.

2 Pages  1 2 >Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0378sec    0.43    7 queries    GZIP Disabled
Time is now: 4th December 2025 - 02:34 AM