TCCD/TCC5 discussions, memory tuning, voltage, etc.
|
|
 May 17 2006, 12:43 PM
Return to original view | Post
#1
|
 
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle 
|
QUOTE(charge-n-go @ May 6 2006, 11:00 PM) sorry to hear abt yr not so good TCCD. Only DDR510? Your timing is quite loose. Well, i've js tried DDR510, with 2.5-4-3-7 @ 2.80V It js cant pass prime for more than 1/2 hour.  At vdimm 2.8v, You should be able to hit 275MHz, at least. Are you ram modules in the orange slots? This post has been edited by ALeUNe: May 17 2006, 12:44 PM |
|
|
|
|
|
May 17 2006, 12:47 PM
Return to original view | Post
#2
|
|
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle
|
QUOTE(lichyetan @ May 17 2006, 12:38 PM) my teamxtreem succesful make it to ddr600 at last with my asus board with 2.9vdimm, i added a fan to active cool the ram, so it wont fail after 3 hours of prime, and do pass 7hours 45 min... Command rate 2T? |
|
|
May 17 2006, 02:04 PM
Return to original view | Post
#3
|
|
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle
|
QUOTE(lichyetan @ May 17 2006, 01:44 PM) yup, cause the asus board got issue with 1T, if i go 1t it just can reach 230, the board limiting me... I see. Asus should fix this problem in furture bios update. |
|
|
May 17 2006, 04:04 PM
Return to original view | Post
#4
|
|
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle
|
QUOTE(charge-n-go @ May 17 2006, 02:46 PM) Yes, it's in the orange slot. I dunno if my proc doesnt like /11 divider. Lower the multiplier and see what's the max MHz @ 1:1.Unlike Venice, Opteron/Venus should work well with most of the dividers. |
|
|
May 18 2006, 11:27 AM
Return to original view | Post
#5
|
|
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle
|
QUOTE(charge-n-go @ May 17 2006, 04:50 PM) I've tried, but still cant work. Last time i can run DDR480 nicely with 2.70V 2.5-3-3-11 timing with DFI nF2 Infinity Ultra. Prime for 100 hours also no problem. But with this system, 2.5-3-3-6 DDR480 requires 2.73V and cant really pass 12 hrs prime. Forget about Prime95. However, 2-3-3-6 can run very very well, up to DDR470. I cant do it with my old AXP system at all. Can your ram run other applications (like games, folding) stable at 275MHz or higher? |
|
|
May 18 2006, 02:34 PM
Return to original view | Post
#6
|
|
VIP
9,692 posts Joined: Jan 2003 From: Mongrel Isle
|
QUOTE(charge-n-go @ May 18 2006, 02:26 PM) Can run, but eventually the system will get BSOD even at DDR500. DDR550 is out of reach for sure. Once boot into windows, already feel laggy, and cant do SuperPI 1MB at all. This is really weird. You must have some really bad batch of TCCD.I know most companys advertise their TCCD ram modules capable of 275MHz 3-4-4-8. You can check Corsair website if this ram able to run 275MHz by specification. May be you should RMA it as these ram modules doesn't work as specification. |
| Change to: |  0.0226sec
 0.37
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 01:17 PM |
Quote