checked wif 1 stick of ram, can't oc for d stick which hv problems

you can only RMA if the stick cannot do what is rated by the manufacturer. if only 1 stick problem... both should be returned (if it's a dual channel kit).

juz to share sum findouts i get recently:

300HTT @ 2.5-4-4-8 (2T) use 2.87V

280HTT @ 2.5-4-4-8 (1T) use 2.67V

i found dat 2.6V(bios set) is d sweet spot for my FC @ 1T, anyvolt be it higher or lower will give errors in memtest.

W/ 2T setting @ 300HTT or higher, 2.8V is d min.

have u fine tuned the memory timings?

i want to ask, normally, TCCD can do 2-2-2-5 at what speed ??
my proc now can only keep up with something about 245MHz.....
it is better for e to get BH or TCCD if i plan to upgrade ??
only using CVS

This post has been edited by LittleLinnet: Oct 12 2005, 11:22 PM

yep...

tried almost eveything but still no go for 300HTT @ 1T...

around 210-215 @ 2-2-2-5

your cpu/mobo?

if u're quite sure that your proc is limited to only 245mhz fsb... so BH is a good choice then.

n00b asking here, might silly question.

can TCCD run 2.5-3-3-7 at high Htt? let say around 250Htt. can arr?

Yup..... you can probably do up to 275MHz with that timing at 1T.

250fsb 2.5-3-3-7 no problem for TCCD
275fsb 2.5-3-3-7 not all TCCD can do maybe 2.5-4-3-7 ok

A lot of TCCD can do 300mhz 2.5-3-3-7 provide that u fine tune the ram and enuff voltage supplied.

how much voltage do ur OCZ need to run at 300mhz on 2.5-3-3-7 ?

my TCC5 does not run 300mhz at 2.5-3-3-7 ... it can only run at 2.5-4-3-7 with 2.7Vdimm only, if the HTT is 300mhz

if using 'divider', it needs 2.8Vdimm

edit - X2 Posted

This post has been edited by gengstapo2: Oct 13 2005, 06:54 PM

can this statement applied to both TCCD oso??

This post has been edited by gengstapo2: Oct 13 2005, 07:14 PM

yes... coz basically it's the same chip

just try on my TCCD but after some time playing games, its automatically restart my pc. now, using the default timming 2.5-4-4-8(damn LOOSen wan)

do u guys tried the stability of ram usin memtest of windows version?

i juz tried it, error free 4 1XXX% but.... when i'm about 2 take d screenshot... i pressed ok then it didn't show d percentage ledi...

but atleast now i know 280HTT is the max for my mobo 2 run @ 1T.

guys, do u all mind sharing d genie bios settin dat doin 2.5-4-3-X @ 275ish HTT(1T ofcoz )? Mine can only do 2.4-4-4-X w/ 2.67V. Increament of voltage doesn't help, so i think it's becoz of d alpha timin.

thx in adv... hehe...

EDITED: I'll give mine 2ml... 4got 2 brin d detail 2day...

This post has been edited by ah_khoo: Oct 13 2005, 08:47 PM

does nF3 Ultra and nF3 250Gb has the same genie/memory bios structure? if yes... i can share mine. but i know nF4 is different.