Reporting in to V18.88.

Here i wan to share my review after i DIY my ori drop in air filter to open pod air filter.

Take me mins to dismantle the ori air filter, 10 mins to adjust the open pod position, 5 mins to tighten the screws.

After installation,

- my oil paddle suddenly become so light.
- gain pickup, can reached 100km/h faster. Din record the time.
- din try top speed cos my tires not allow me to do so. Makan abit due to last time accident.
- FC wise, i dono cos still got 1/2 tank to go. Just try caltax for the 1st time. So not sure with the FC.
- You can hear the air suckion sound when revving.
- Will try to make a heat shield for it since Persona engine bay quite hot. that y i leave the ori air filter head there to let outside air in.

Sam, maybe will get your lcp, come satay celup at melaka la since u pass by. Muar a bit far la. Saturday need to work. LOL

Auto, that why i wan to DIY a heat shield ASAP. Cos after i drive, i open my hood and i can feel the heat near the air filter. I checked and see how is the FC, if too high then i plug in the ori one and change drop in filter.

Btw xan ur filter still available? Just in case to back up. LOL

My car ar, low profile one la. If u really test drive u will feel my car a bit bumpy cos my tyres not balance anymore. The rear tyres goes up and down,

Sure, but if my car can meet your requirements then paiseh ah LOL

I tough your dad don allow your to hard mod your car? Open pod is very obvious oh.

What is PnP?

I got this together with the universal handphone stand when i buy it last time. It is like a plastic plate with a double sided tape under it, the another surface is the to let ur handphone to suck on it. LOL

Anyone here apply thermal wrap for their Exhaust system? I read from forum it help to reduce the engine heat.

LOL dono when got time to install it.

Auto.

Another review of the open pod filter. Our persona heat is actually come from btm of the air filter box. After i remove all the heat comes up. Hot until can fry egg.

Still dono wan to continue with open pod or not. LOL

Here is my temporary Heat shield. Hope it won burnt

Chill guys. That was my measurement to make a steel one. I just take that card board as measurement. LOL don worry.

Is your air filter still available? Just for backup

xan your filter still available?

walao kuku lee

This grounding cable is not good. Their cost only Rm5. Inside all aluminum wire. I custom made mine using thick Copper wire. Lyn got one ppl sell ar.

Here is the link http://forum.lowyat.net/index.php?showtopi...=grouding+cable

He got explain the details. I got my cable from him. after install my head lamp become so bright. No need Osram night breaker plus d. LOL

Btw here is my custom made heat shield.

Yeah agree with you. His cable good quality.

RM 69 for 4 points. cable only not include the cable lug.

Cable lug is to hold the cable and make it easier to install and attach. You need a cable clamp to clamp the cable with cable lug. My work place got so i diy those stuffs. Eric sell cable lug for RM3 Each.

This is how Cable lug look like


No space d la bro.

Wa, u wan eric send to me then i clamp for you, then postage to you? LOL. RM3 consider cheap already. He use thick cable lug not like the one sell outside with grounding cable. This cable lug is heavy duty for industrial purpose.

i dono where to get the cable as good as eric one.

Yeah, not only wasted a lug, if the lug cant be taken off from the cable, u need to cut the cable. Cable short d.

His cable price is not including cable lug. need to add Rm3 for each lug. one cable 2 lugs.

I brought 4 cables from him WITHOUT CABLE LUG, total is RM69 including postage.

IF added Cable LUG is RM 69+ (8*RM3) = RM93 in total.

I bought from his is blue cable which is slightly exp. Rm0.30 per cm. The one in the thread i share is yellow one which is RM0.18 per cm. Blue is thicker a bit compare to the yellow one.