not a problem, but you'll just lose the root after you reboot your phone. That's why the name TEMProot / temporary.


what I'd noticed, speed increase a bit. smooth of course (thanks to the pioneer dev ). battery life still monitoring. but so far, battery good. I'm reverting back to our stock radio.

com.process.phone bla bla bla not responding (Force Close) isn't it..? Try flash MDJ kernel and clear cache / dalvik cache. Then should be ok. Experiencing same problem before, but solved it already. but mine got problem with theme's file not match with the rom's file.

This post has been edited by syuki: May 29 2011, 07:18 PM

yes , its something like "com.process.phone" ... i try to flash the same RIL again and see.... if still cannot ...will flash ARHD 5.1.7....juz lazy to do back up again and again

---

Added on May 29, 2011, 7:29 pmtried to re-flashed RIL again.. same problems... but if i flash to MDJ kernel , i need to flash the radio again , as recommended by MDJ ....

This post has been edited by ralph_lauren: May 29 2011, 07:29 PM

It's not a radio or RIL problem.. the problem happened if you're using Sense 3.0 add-ons + theme. some say after flash other kernel, then problem solved. no need to re-flash rom and full wipe etc, wasting time.

Edit: LOL, why do you need to flash radio again after you flash kernel. it's not the same file. what i understand, both kernel and radio are not related.

This post has been edited by syuki: May 29 2011, 07:31 PM

ok then .. will flash MDJ kernel and see... need to read the whole MDJ post to make sure how to flash using CWM .... =.=

~noted on radio and kernel...a bit noob

This post has been edited by ralph_lauren: May 29 2011, 07:33 PM

radio is permanent unless you flash a new one, the same goes to recovery (CWM)..kernel on the other hand, is with ROM..flash new ROM comes new kernel

You can flash kernel either using Kernel Update Utility or flash thru Recovery. Mostly people just flash thru Recovery only, easier.

Edit: See, master monza explained. I'm noob also..

i flashed ARHD 5.1.6 week ago , and flashed to Leedroid kernel tis morning.... not using ARHD 5.1.6 kernel

btw , is flashing kernel using CWM , same like flash ROM ? i mean "install zip from SD card " ?
coz MDJ kernel can only flash thru CWM , can't use kernal update utility ....

~successfully flashed to MDJ kernel V22 ... lets pray hard its alright now ...LOL

This post has been edited by ralph_lauren: May 29 2011, 07:46 PM

@ralph_lauren
flash like you flash a rom.

Edit: You cleared dalvik cache & cache or not..?

This post has been edited by syuki: May 29 2011, 07:47 PM

^ Yes, can use CWM also

Haha love this one

Master Monza... what ROM u using now?

dalvik cache ?wats that ?

i can only see clear partition cache in recovery.. but i didn't clear it... LOL

everything is alright now ... no force close and watsoever d...phew.... signal strength increased d ...

~ thanks everyone ...

---

Added on May 29, 2011, 7:51 pmyeah...flashed it d... thx a lot

This post has been edited by ralph_lauren: May 29 2011, 07:51 PM

Something i want to share

There, problem solved. Dalvik cache in advance menu in CWM. In case now that mostly we're using EXT4, got a zip file to clear all that. if manually clear from advance --> delete dalvik cache, your phone will revert back to EXT3.

@rock
Currently on the latest ViVo

that's impressive... im using juice defender , flashed to MDJ kernel V22 , latest ARHD radio , and ARHD 5.1.6 ... lets see if i can get 80% of wat u get..LOL

---

Added on May 29, 2011, 7:54 pmusing ARHD 5.1.6 ... i believe don't have ext4 for this version right ... LOL ...

This post has been edited by ralph_lauren: May 29 2011, 07:54 PM

@ralph
Dalvik is in ADVANCE menu...go there and you'll see it

---

Added on May 29, 2011, 7:56 pmi thought ARHD 5.1.6 is already ext4

This post has been edited by monza84: May 29 2011, 07:56 PM

@ralph_lauren
sorry, i forgot you're using 5.1.6.. sorry.

@monza
that's a good result. but i think that can be change. got some tweaks or something, need to set something. i forgot already.

@syuki
Ya, mine there not using SetCPU setting at all, all default setting ...with auto-brightness some more ...

---

Added on May 29, 2011, 8:00 pmSamurai II is ...

This post has been edited by monza84: May 29 2011, 08:00 PM

@monza
hehe. clever ar you.

btw , checked my kernel version thru"About Phone"

Stated there , Kernel version: Unavailable" .. Zzzzzz......

where can i check other than thru about phone....

~ Monza , wat kernel version , rom , and radio ur using ?

This post has been edited by ralph_lauren: May 29 2011, 08:02 PM