Anyone here know how to cut the aluminum rod?

Usually don't need to add wood, just use those 'butterfly' look like hook to hold your rail.

got picture?

Ask those curtains people, they know.
Tomorrow i try snap 1 picture for you.

it's depend on your height , let said 25 feet ,of course the butterfly couldnt support ..need input the board inside the plaster celling.

Happy Chinese New Year ....

Is it possible to make a 9 feet wide roller blind for my big window? Is there such big size?

it's possible , it's depend on your budget , normally above 8 foot blind ,must use those high end blind.

There are few different curtain rod, how to choose?

Hi there,

maximum width for roller blinds depend on the material you choose. Normal one is 2.5 meter and 3 meter.

More than that need to separate it into 2.

You may add jointer so one string to control both blinds simultaneously.

Mainly there are 3 type of curtain rod.

Wooden, stainless steel and rose color steel.

Wooden one also have few color to choose.

The diameter also have 28mm and 32mm diameter size..

imported wood, local wood, silver steel colour, antique copper colour, antique gold colour.
with crystal end caps to choose from too~

diameter have 22mm besides 28mm and 32mm. generally, smaller diameter for smaller window size.

This post has been edited by Aster66: Jun 26 2014, 11:04 AM

Hi all..

Any shops recommended in Penang for good quality curtain railings, rods,curtains, etc..??

Hi,

Anyone using polymer curtain? I saw it in a fair today and the material is quite smooth and soft. Any disadvantage compared to fabric? I am indecisive on which one to take as fabric is few hundreds more expensive than polymer. Both also 100% block sunlight

Hi

I am looking for fabric curtain
I was informed that Nilai 3 sell reasonable price fabric curtain
Can anyone advise me which shop is reliable and cheap with sewing too.

Thank you

This post has been edited by wwl.cvi: Jul 2 2014, 07:12 PM

hi. i'm planning to DIY my curtains n installation. never done this before, so i've read some guides from the internet. i've sized up my curtain rod length based on these:

http://debbarrett.com/ask-an-expert/
http://www.polesandblinds.com/curtain-poles/guides/

i'm going with grommet curtain design

i've made some sketches of curtain rod length. hope u guys can provide some opinions or if u see anything not right. thanks.

dimension in inches



This post has been edited by miaopurr: Jul 5 2014, 01:56 PM

Curtains! Curtains! So much to pick from and don't know what to pick! I wanted to use a different curtain designer from my last one for a change....but ended up going back to my original one because of the service. Did 2 layers for all the rooms.

Now looking for classy looking rod ends. Any ideas?

usually how to take the measurement? width of windows or track? because my track is wider than the windows. please advise...

take the tracks' better, then have to specifically let the curtain seller knows that you're taking the tracks' width.

Thanks for your input