Look Nice ~ 

[attachmentid=2582661]

Why don't they put the indicator light (signal) inside. Later we can put bigger spotlight at the bumper.
Exora Turbo la bang...lagi besar and power. Lps ni kena tapau ngan exora la. huhuhu
I don't really light stream, prefer wish more. But the best is grandis (design).

nope..take it..throw it....later auntie ask..ehh ur car can??no aunty sory my car 5 seat oni...no more seat (wif troll face)   ....scirocco & polo among the best opt!

tis old foto..

damn.. 50% increase over CPS

gila jelly sial..

ngeri tgk line biru mencanak.. mmg xde can la cps pasni.. kena bg laluan plak 

overtake like a boss 

sorry if it's too wide. I'm not a fan of spoiler

Mine the prang sound starts at 3k
And more annoying after reach 6k until rev cut
But seriously, it will never have prang sound if u're not changing the extractor
A bit regret changing the extractor coz i like the bassy sound
Now i have to find a way how to get sound again, change bullet or find other muffler
Thinking to get some smaller muffler, like kobe's
@Kobe
I want to borrow ur stock muffler. U still have?

Baboy!!! apahal aku pulak. aku pemandu berhemah ok.
Keta tengah panas, no plate takde. aritu kena sound dah ngan abg polis wahahaha
Tapi pagi tadi balik keje, bakar neo cps 1 ni hahaha
Lawak gile driver die.
Keta nampak ganas, sticker bagai, ekzos trumpet, rim tak sure la ape sbb tgh berpusing
Tapi bile corner, aku duk sebelah die, pandang kanan dan senyum. SLOW!!!!!
Nak troll punye pasal, aku bukak lampu dalam keta aku , bagi nampak aku tgh senyum kat ko hahahaha
Tekanan jer aku. Last2 aku tinggalkan jer.
Driver takde telor kot, jalan basah lagi.

lol...gimme ur plate number and ur car color. so i wont kacau u on the road
I prefer neo if i'm in KL, gen2 if travel frequently.
I started to regret buying the waja
i still have a lot to learn. still cannot tackle the corner while light up a cigarette like what Bunta did in Initial D
yeah....luv u muah muah...i'll take it from u later on. i want to test something with the stock muffler.

im 178cm...i found tht neo driver seat touching my spiky hair when on bumping road and the steering cannot be adjusted to more height anymore! .....i dont like seating like boat...where lay too low like sleep!...i always sit straight but the length of leg is maximum set... kaki panjang here 

guys issit too low??

[attachmentid=2588270]
[attachmentid=2588272]
[attachmentid=2588273]
testing my fren Hi Low adjs. tomorrow change back to my oem spring...conclusion setup too low
but handling is superb + wife wif 4month...still confort except  trip to K.T last week she felt the seat belt too tight as when car bouncing...and tht time im doing 160kmj along the ketereh oil district  ...

http://paultan.org/2011/12/15/official-det...-premium-prime/
top speed 185km/h
0-100kmh in 13.3sec (impressive for an MPV!)
FC claimed to be 7.8L/100 km

"The stroke of the engine has been shortened from 88 mm to 86 mm, resulting in a smaller displacement of 1,561 cc vs the Campro CPS’ 1,597 cc"

"Spec-wise, the Bold Premium CVT gets leather seats, a leather-wrapped steering, front fog lamps, rear spoiler, electric foldable wing mirrors, cruise control and reverse camera with rear view mirror LCD. The latter is similar to the system seen in the Kia Forte 6-Speed."

"Bold 1.6 Executive MT for RM70,998, the Bold 1.6 Executive AT for RM74,998 and the Bold 1.6 Premium CVT for RM79,998. The Exora Prime is priced at RM88,998."

not bad pricing...

DIY session to fix widen gap on Gen2 Bumper

Pic before fix
[attachmentid=2593599]

Pic after fix
[attachmentid=2593600]

Step 1
- inspect whether bumper lower front mounting bend backwards (happen to my gen2). There are 2 L-shape mounting right n left which support the bumper weight.
[attachmentid=2593601]

Step 2
- knock the lower front mounting to original position n tie the bumper into position. My case, i use cable tight to tie for more flexible joint between them.
[attachmentid=2593602]

Step 3
- remove the tyre n open the banana leaf (mudflap IINM).
[attachmentid=2593623]

Step 4
- Unscrew the front or both (my case only front) bumper clip and replace with the special tools as pic attached (Pic speaks thousands words) sebenarnya malas nak tulis hehe
- U can see original clip is very small n cant cover large surface of the bumper n fender layer  
[attachmentid=2593603]
Tiny original clip

[attachmentid=2593604]
[attachmentid=2593605]
Special tools and its arrangment

[attachmentid=2593609]
[attachmentid=2593611]
Replace the original clip with the special clips.

The results u see above n hopefully its remain la like that hehe.

btw
[attachmentid=2593654]