QUOTE(shawn2k4 @ Jun 5 2011, 05:24 PM)
I was on Froyo 2.2 built. And it was very laggy and very high battery consumption.
What i read on several locations is to actually try to update it to Gingerbread 2.3.3 . Followed the steps provided and ended up with a problem whereby my phone gets stuck in the Samsung Galaxy I9000 loading screen and it never changed.
What i'm trying to do now is to try and reflash the entire firmware , and if possible wipe out all existing data so that i can re flash it from scratch. However upon attempting to do so i came into this error now /
Is this some problem with the Odin Pit file i used? But its the same as the one provided in the list in the post above.
@yuktsi14 : The files are different for the PDA,Phone and CSC as mine are DXJV9_OLBJV9_Sbl . Is this a problem?
so right now u cant switch on your phone? any problem else?What i read on several locations is to actually try to update it to Gingerbread 2.3.3 . Followed the steps provided and ended up with a problem whereby my phone gets stuck in the Samsung Galaxy I9000 loading screen and it never changed.
What i'm trying to do now is to try and reflash the entire firmware , and if possible wipe out all existing data so that i can re flash it from scratch. However upon attempting to do so i came into this error now /
Is this some problem with the Odin Pit file i used? But its the same as the one provided in the list in the post above.
@yuktsi14 : The files are different for the PDA,Phone and CSC as mine are DXJV9_OLBJV9_Sbl . Is this a problem?
u must download file with bootloader.
1. set your phone into download mode (hold volume down + home button + power button)
2. set odin with everything.
3. close kies that run on your computer.
4. plug in usb and u will see added in odin.
5. click start and cross finger and wait.
6. done!
http://forum.xda-developers.com/showthread.php?t=1011901
Special for DXJV9:
1. Flash with re-partition using 513.pit.
2. You will see a lot of red text after the flash is done, don't panic, just do a 'wipe data/factory reset' and reboot the device when done.
3. Let the device boot all the way then turn it off.
4. Re-enter Download Mode and re-flash only the CSC file without pit and without re-partition.
5. Enjoy
This post has been edited by ic3joker: Jun 5 2011, 05:40 PM
Jun 5 2011, 05:31 PM

Quote
0.0506sec
0.82
7 queries
GZIP Disabled