External Water Filter, Membrane or Sand type?
|
|
 May 8 2011, 11:51 PM
Return to original view | Post
#1
|
 
Senior Member
4,184 posts Joined: Jan 2008 From: Builders Hardware Enterprise 0362572412 
|
QUOTE(gunh @ May 8 2011, 09:55 PM) membrane type is not advisible... after sometimes, the membrane will get choke from the dirt partical and required regular maintenance or replacement... Exactly what i told Jo_da48 and also it will reduce ur direct water pressure a lot. FYI, this is what i found from the web » Click to show Spoiler - click again to hide... « http://www.usj.com.my/bulletin/upload/arch...php/t-7636.html This post has been edited by zheilwane: May 9 2011, 12:11 AM |
|
|
|
|
|
May 9 2011, 11:59 PM
Return to original view | Post
#2
|
|
Senior Member
4,184 posts Joined: Jan 2008 From: Builders Hardware Enterprise 0362572412
|
according to him, hydro1 used to b distributed by cosway but that was 2005. May b got some improvement now
This post has been edited by zheilwane: May 10 2011, 02:34 AM |
|
|
May 10 2011, 03:41 PM
Return to original view | Post
#3
|
|
Senior Member
4,184 posts Joined: Jan 2008 From: Builders Hardware Enterprise 0362572412
|
just get a professional person to do it, RM 280 only
|
|
|
May 12 2011, 08:16 PM
Return to original view | Post
#4
|
|
Senior Member
4,184 posts Joined: Jan 2008 From: Builders Hardware Enterprise 0362572412
|
QUOTE(glamour @ May 11 2011, 04:39 PM) i'm using Hitachi 1HP pump.... lol, y suddenly talk about water pump?cost around RM 560 include installation don't need water heather pump... this pump enough for the whole house but mine is single story... with two bathroom |
|
|
Jul 22 2011, 02:23 PM
Return to original view | Post
#5
|
|
Senior Member
4,184 posts Joined: Jan 2008 From: Builders Hardware Enterprise 0362572412
|
QUOTE(ann khee @ Jul 22 2011, 01:47 PM) I am using sand filter filter from Filter First. Been using for almost 5 years. So far so good. I bought it as it's cheap, not mistaken RM1k+, budget constrain. However if there's water cut, usually when water supply resumes, incoming water is dirty with whitish particles. Then sand filter cannot filter this. So I usually let water run for some time till it's clear again. Just close the water inlet to your pump and install a bib tap before the filter. After water rationing, just open the bib tap and let the water flow out. |
| Change to: |  0.0174sec
 1.66
 7 queries
 GZIP Disabled
Time is now: 27th November 2025 - 07:50 AM |
Quote