which brand of led fan most reliable?!

Xigmatek^^.pretty then Coolermaster!

i see, other than xigmatek?

planning to get few units of led fan to mod my case!

http://forum.lowyat.net/index.php?showtopic=1014899&hl=fan

find him^^

Lian Li?

Previously my K62 used nearly 6 months or more, none of the LED from fan failed...

What do you mean? The fan or the led or both. I have a few CM led fans that at least one of the leds died prematurely. I mean after 3-6 months of usage. The fan is still working except the led. Now using Xigmatex. So far so good. Luck?

cm too noisy.xigmatek quite@@

i see, the reason fan noisy is because of the high RPM?

yea . high RPM cause the fan noisy. thats why i bought fan controller .

LOL.

decided what brand to go ?hmm

enermax...

how about CM turbinemaster mach 1.8?

This one

guys, now i got 2 x F12 for side fan and 2 x Blade Master for cpu cooler, how i put on the motherboard? all above are 4pins, but my motherboard support only 1 4pins slot.

Boss....CM Turbine Master Mach 1.8 suitable using spray paint a? Need spray fluorescent colour on that surface..

This post has been edited by LBYuan: May 17 2011, 05:58 PM

I'm not sure myself coz I've never done it before. but the fan can be disassembled easily for ease of cleaning so should be fine I guess. Don't ask me how to do it though.

Hmm...Okay. Btw how to remove spray paint completely?

cooler MASteR?

thinner or spirits will do. but be careful don't put too much. it may damage the fan.

Ok thanks

---

Added on May 17, 2011, 8:10 pmYup.


This post has been edited by LBYuan: May 17 2011, 08:10 PM

if you got some cheap unused fan maybe you should try experimenting with that first before trying with the more expensive ones. Try to spray it first then try to remove the paint, see what happen.