Hey guys I'm currently running on AMD's hex core 1055T on a MSI 770-C45 mobo. I've replaced my stock cooler with a CM V6GT. Thing is, whenevr I look into bios on restarting my pc, the bios shows core temps of round 35-38C whereas once it enters windows, the core TEMP software that I'm using clocks idle at 27-29C and full load via stress test at 35-37C. I've did the check with AMD Overdrive with the same results. Are these two temp readings from both software reliable? I've updated my bios to the latest.

Can any1 recommend me a more reliable software (if needed)

Thanks guys

can use hwmonitor?
http://www.cpuid.com/softwares/hwmonitor.html

REAL TEMP

CORE TEMP..

This post has been edited by Mr.CoMoT: Apr 29 2011, 09:02 PM

Will try hwmonitor & real temp. Core temp software as stated above

---

Added on May 1, 2011, 12:24 amok here are my findings,

Core Temp, HWMonitor & AMD Overdrive readings are the same

Idle: 27'C
Max load on stress test via AMD Overdrive Stability Test: 35'C

All at stock settings. Is this normal??? I dont know how else to get a proper reading

This post has been edited by byteen88: May 1 2011, 12:24 AM

if want stress test,go for Prime95

if u wanna see all yr temp u can even try everest:)

LinX is more stressful than P95

Ok will try everest, and linx will update soon

Temp monitoring - HWMonitor, CoreTemp
Stress Test - LinX, Prime95, IBT

can use folding@home StressCPU v2.0 - Gromacs Based CPU Stability Tester also.
http://folding.stanford.edu/English/DownloadUtils

tested with everest, linx and prime 95.

temps still only show 37'C max load =\

Q. Is smth wrong with my sensor?

do the temperature shows different on idle and full load?

Yes they do. Temp on idle is between 25-27C full load is between 34-37C not running on watercooler. Just CM V6GT with the stock fans.

hmm, pc inside aircond room?

Nop no air conditioning =\

imo..thts just normal temp

If your PC not in overclock condition, then it is normal~

hmm...okay...is this the normal temp for 1055T? any1 using this processor and getting the same temps?

try PC wizard

if i'm not mistaken temperature sensor for phenom ii x6 is incorrect...
you need to consider +10c to the temperature reading...
i read it at overclock.net...correct me if i'm wrong

owh isit? hmm will try to find that article and see =\

core temp ftw

i use speedfan

coretemp for me

hmm okay for some reason now all my software is showing my cores at 0'C...even AMD Overdrive and CoreTemp is showing my cores at 0'C any ideas?

what happened?? what about cpu temp?? post your hwmonitor screenshot here...

what cpu are you using?

Forum nt letting me post....i dunno why??

using AMD 1055t 2.8Ghz Hexa-core
CPU-Z

This post has been edited by byteen88: May 27 2011, 02:00 AM

speedfan,use your bios or cpu-z

same thing happened to my bro's pc.. wud luv to know the solution tooo.

usually this will occur on unlocked cpu.
but your cpu is not unlocked cpu.

Well I'm just as stumped as u are Saturn =\

that makes 3 of us.. so what happened if its not unlocked..?

hmm, got try latest and few older version of the software?

I'm using both "Core Temp" & "HWMonitor". I would say "Core Temp" is better, give it a try!

guys how can i monitor vrm and mosfet temp on r3e..?