Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
16 Pages < 1 2 3 4 5 > » Bottom

Outline · [ Standard ] · Linear+

 FlashFXP [Trial]

views
     
TScybpsych
post Aug 1 2011, 03:08 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1616 RC1

http://down1.opensightsoftware.com/liveupd..._1616_Setup.exe
http://down1.opensightsoftware.com/liveupd...16_Portable.exe

Changed > Added the ability to set the SSL protocol version (SSLv3 or TLSv1) in the Site Manager / Quick Connect. It has come to my attention that some servers require AUTH SSL and TLSv1.
We made a couple minor changes to the way updates are launched via FlashFXP.
TScybpsych
post Aug 4 2011, 04:30 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1617 RC1

FlashFXP 4.1.0 Build 1618 RC1

http://down1.opensightsoftware.com/liveupd..._1618_Setup.exe
http://down1.opensightsoftware.com/liveupd...18_Portable.exe

This is a re-release of build 1617, our CDN was serving a pre-release build of 1617, a last minute bug was discovered and fixed prior to the official release but the CDN control panel was down preventing a cache purge which resulted in the pre-release buggy build being served.

This update includes an additional bug fix that was brought to my attention by Lbeansy in build 1617 as I was preparing the new build, so I included it in this update.


Fixed path drop-down box > mouse wheel scrolling wasn't being handled directly by FlashFXP when it should have, instead it was relying on the mouse driver to perform the scroll operation.
Fixed status window > scrolling via the scroll-bar thumb was broken if the window contained over 32k lines of text.
Improved status window > 10x speed increase by re-factoring the line wrap routine.
Fixed transfer progress bar > the progress bar wasn't re-sized correctly in some situations, as a result the bottom of the bar was sometimes cut off.
Fixed queue window > drag/drop > in the prior build a setting was incorrect causing abnormal behavior.
Fixed FTP > LIST parser > If the connection was lost or closed the temporary buffer used for parsing wasn't cleared, the following connect/reconnect would then treat the old data as part of the next list data.
Fixed status window > scrolling up to the oldest entry would only display a single line in the bottom of the window.
Fixed remote drop-down box > the drop-down navigation history wasn't updated correctly after 15 items were added.
Fixed FTP > LIST parser > entries with dates older than 1900 were treated as invalid and not shown in the file listing.
Fixed server > rename > caching issue, if a transfer is attempted after rename the internal object cache wasn't correctly updated, re-using the stale cache data.

This post has been edited by cybpsych: Aug 4 2011, 06:52 AM
stasio
post Aug 4 2011, 08:24 PM

10k Club
********
All Stars
18,503 posts

Joined: Oct 2007
From: P.Jaya
FlashFXP 4.1.0 Build 1619 RC1

http://down1.opensightsoftware.com/liveupd..._1619_Setup.exe
http://down1.opensightsoftware.com/liveupd...19_Portable.exe

» Click to show Spoiler - click again to hide... «


This post has been edited by stasio: Aug 4 2011, 08:25 PM
stasio
post Aug 7 2011, 05:43 AM

10k Club
********
All Stars
18,503 posts

Joined: Oct 2007
From: P.Jaya
FlashFXP 4.1.0 Build 1620 RC1

http://down1.opensightsoftware.com/liveupd..._1620_Setup.exe
http://down1.opensightsoftware.com/liveupd...20_Portable.exe

» Click to show Spoiler - click again to hide... «


TScybpsych
post Aug 7 2011, 11:56 PM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1622 RC1

http://down1.opensightsoftware.com/liveupd..._1622_Setup.exe
http://down1.opensightsoftware.com/liveupd...22_Portable.exe

Perhaps I may have jumped the gun on with FlashFXP reaching the RC milestone, Since RC 1 was released we've had dozens of bug reports, most of them very minor but a couple of them have been rather serious.

Over the past couple weeks we've had reports of FlashFXP locking up, freezing, and sometimes crashing on exit. I believe we have finally tracked down the root cause of the problem and it should now be resolved. If not please let us know.
Fixed a list error when using the PASV command on DRFTPD.
5 minor bug fixes.

This post has been edited by cybpsych: Aug 8 2011, 12:05 AM
TScybpsych
post Aug 8 2011, 01:13 PM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1624 RC1

http://down1.opensightsoftware.com/liveupd..._1624_Setup.exe
http://down1.opensightsoftware.com/liveupd...24_Portable.exe

Fixed compatibility issue with old legacy FTP servers that only send <LF> without <CR> to indicate end of line on the command session.
Fixed flickering statusbar during redraw.

This post has been edited by cybpsych: Aug 8 2011, 09:14 PM
TScybpsych
post Aug 9 2011, 02:07 PM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1625 RC1

http://down1.opensightsoftware.com/liveupd..._1625_Setup.exe
http://down1.opensightsoftware.com/liveupd...25_Portable.exe

Fixed issue with using STAT -l missing the first item in the list.
Fixed input validation that allowed the user to enter a empty entry into the ASCII file extension list, an empty entry in the list effectively resulted in all transfers being performed in ASCII mode.
Fixed MLST parsing error with some FTP servers.
The whatsnew.rtf file is now viewable via the help menu after installing an update via LiveUpdate.
TScybpsych
post Aug 13 2011, 07:21 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1627 RC2

http://down1.opensightsoftware.com/liveupd..._1627_Setup.exe
http://down1.opensightsoftware.com/liveupd...27_Portable.exe

Fixed installer > In some situations the installer would report insufficient free disk space and fail to install, this has been resolved.
Added some additional checking around the FTP command RMD <folder>, some FTP servers do not like absolute paths, now depending on the failure message FlashFXP will try again using the relative path. Such as X2 WS_FTP Server. IpSwitch has confirmed the issue when the "Show Home Folder as root" option is selected for the specific user account. They do not yet have an ETA for the release of this fix.

This post has been edited by cybpsych: Aug 13 2011, 09:40 AM
TScybpsych
post Aug 13 2011, 09:46 PM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1628 RC2

http://down1.opensightsoftware.com/liveupd..._1628_Setup.exe
http://down1.opensightsoftware.com/liveupd...28_Portable.exe

The previous build contains a defect that could cause FlashFXP get stuck in an infinite loop. Please update ASAP.
TScybpsych
post Aug 15 2011, 08:42 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1629 RC2

http://down1.opensightsoftware.com/liveupd..._1629_Setup.exe
http://down1.opensightsoftware.com/liveupd...29_Portable.exe

Fixed UI graphic related defects when running FlashFXP on Windows 2000.
Fixed caching defect when moving files/folders on a server while navigating to another cached folder.
TScybpsych
post Aug 21 2011, 04:18 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1631 RC3

http://down1.opensightsoftware.com/liveupd..._1631_Setup.exe
http://down1.opensightsoftware.com/liveupd...31_Portable.exe

Fixed > queue list > sort > The sort behavior didn't match the column arrow.
Fixed > Transfer Graph > Splitter > The splitter above the transfer graph wasn't using the same style as the other splitter controls.
Fixed > keyboard shortcuts > The behavior of Ctrl+J and Ctrl+K was based only on the active side instead of being dynamic, if one side is local browser and the other remote browser then these shortcuts should function globally regardless of the active side.
Fixed > Remote File Search > CHMOD > After performing a CHMOD operation an access violation crash was triggered.
Fixed > Transfer Graph > 3D Type > When the graph display was set to 3D the transfer speed drawn on the graph was overlapping the border on the right side.
Fixed > Transfer Graph > After opening the Preferences dialog and making any change, then clicking Apply or OK, the Transfer graph height was reset to default.
Fixed > Transfer > Synchronization > When using "One way with delete" with a download FlashFXP would crash with an access violation.
Fixed > Queue > Edit > The dialog was showing "Multiple Selected" in the window title even when a single item was selected.
Fixed > A defect in a general purpose date/time to string conversion routine that resulted in the incorrect result.
Fixed > File Transfers > File Exist dialog > When displaying the file date/time, if the date/time was invalid the file would be automatically skipped due to a silent internal error.
Fixed > Language Translations > When a string is untranslated the English text is supposed to be displayed, However due to a defect no text was shown.
Fixed > Live Update > Auto check > Messages shown in the status window weren't properly stripped of the ending CR/LF.
Fixed > Live Update > If the user manually ran an update check while the automatic update check was in progress it could could create a race condition that could lead to FlashFXP crashing.
Fixed > File Transfers > date/time comparison > An unexpected result could occur if the file had an invalid file date, such as files with a creation/modified date older than 1980.
TScybpsych
post Aug 22 2011, 11:44 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1632 RC3

http://down1.opensightsoftware.com/liveupd..._1632_Setup.exe
http://down1.opensightsoftware.com/liveupd...32_Portable.exe

Fixed > Installer > The installer was creating a folder named M_NAME in the folder where the setup was run. The installer script was using the actual variable name and not the value.
Fixed > Remote View/Edit > When navigating cached folders the download routine was requesting the file size which was unnecessary step, and in some cases the server current working directory wasn't the location of the file.
Added > Queue List > Additional state icons for en-queued move and rename commands.
Changed > Renamed whatsnew.rtf on the Help menu to "Release Notes" and the file to "Release Notes.rtf" and now the file is displayed within the internal editor. (due to this change you'll need to wait until the next build before you can use this feature. since the previous build is responsible for creating the file.)
Fixed > Local Browser > When list content in the local file browser was updated due to a external event the content wasn't redrawn correctly.
TScybpsych
post Aug 23 2011, 03:54 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1633 RC3

http://down1.opensightsoftware.com/liveupd..._1633_Setup.exe
http://down1.opensightsoftware.com/liveupd...33_Portable.exe




FlashFXP 4.1.0 Build 1634 RC3

http://down1.opensightsoftware.com/liveupd..._1634_Setup.exe
http://down1.opensightsoftware.com/liveupd...34_Portable.exe


Fixed > Toolbar > button visibility > toggling 'transfer selected' was reversed with 'queue selected', and 'transfer mode' toggle wasn't functioning.
Fixed > Server > time zone > Auto detect time zone offset > For FTP servers that use the LIST or STAT command the seconds field wasn't being truncated properly and FlashFXP was adding the seconds as part of the adjustment.
Fixed > Server > LIST or STAT command > when using the T parameter to include seconds in the date/time. The seconds weren't added to the internal date/time value.
Changed > Task-bar progress > The percentage is now re-calculated whenever an item is added/removed from the queue list.
Changed > Session > On Transfer Complete > After triggering a Suspend or Hibernate we now reset the action back to "do nothing", since FlashFXP is left open and not closed.
Changed > System Tray > Lock FlashFXP > Prompt dialog > Text "Enter password to lock FlashFXP" changed to "Enter password to lock". Added error message on empty password and when the passwords don't match, also fixed the length check to allow a single character.
Fixed > Interface > Maximizing the main application window under certain configurations and environments could result in a application dead-lock.
Changed > Translation Editor > When saving a translation and submitting it to our server, the accepted status reply is shown in the middle of the window and error messages are shown in message boxes.

This post has been edited by cybpsych: Aug 23 2011, 05:31 AM
TScybpsych
post Aug 23 2011, 06:39 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1635 RC3

http://down1.opensightsoftware.com/liveupd..._1635_Setup.exe
http://down1.opensightsoftware.com/liveupd...35_Portable.exe

4.1 Build 1635 (RC 3)
Fixed > 3 lines of text that containing spelling errors, translations will need to be updated.

4.1 Build 1634 (RC 3)

Fixed > Toolbar > button visibility > toggling 'transfer selected' was reversed with 'queue selected', and 'transfer mode' toggle wasn't functioning.
Fixed > Server > time zone > Auto detect time zone offset > For FTP servers that use the LIST or STAT command the seconds field wasn't being truncated properly and FlashFXP was adding the seconds as part of the adjustment.
Fixed > Server > LIST or STAT command > when using the T parameter to include seconds in the date/time. The seconds weren't added to the internal date/time value.
Changed > Task-bar progress > The percentage is now re-calculated whenever an item is added/removed from the queue list.
Changed > Session > On Transfer Complete > After triggering a Suspend or Hibernate we now reset the action back to "do nothing", since FlashFXP is left open and not closed.
Changed > System Tray > Lock FlashFXP > Prompt dialog > Text "Enter password to lock FlashFXP" changed to "Enter password to lock". Added error message on empty password and when the passwords don't match, also fixed the length check to allow a single character.
Fixed > Interface > Maximizing the main application window under certain configurations and environments could result in a application dead-lock.
Changed > Translation Editor > When saving a translation and submitting it to our server, the accepted status reply is shown in the middle of the window and error messages are shown in message boxes.
TScybpsych
post Aug 26 2011, 12:22 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1637 RC3

http://down1.opensightsoftware.com/liveupd..._1637_Setup.exe
http://down1.opensightsoftware.com/liveupd...37_Portable.exe

Fixed > Expand Folders while not connected resulted in an lockup.
Fixed > Uploading large files > 8+gb would often timeout when transferred over a local network.
Fixed > FTP > MLSD compatibility issue > Some FTP servers don't set the default MLSD parameters, as a result FlashFXP would display an empty directory.
TScybpsych
post Aug 29 2011, 06:33 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1.0 Build 1639 RC3

http://down1.opensightsoftware.com/liveupd..._1639_Setup.exe
http://down1.opensightsoftware.com/liveupd...39_Portable.exe

This is a critical update, please install this update ASAP.

I discovered 3 separate cases where the application memory was corrupting itself.

A calculate folder size thread we use to calculate the size of a folders content for upload, when communicating with the main thread sometimes the data object being passed was invalid because the main thread had already freed it.
Remote server search, the sub-search is threaded and the thread was missing critical section around a data structure which could cause corruption.
The routine used for generating the information bar gradient background was incorrectly reading the size of the bitmap, corrupting the content of the memory following the bitmap.

In addition I discovered several variable data type overflows. Where the size of the data being assigned to the variable was larger than the maximum allowed by the variable type.

These defects are not typical and I was caught off guard when my regular debugging tools and techniques did not detect them.
TScybpsych
post Aug 31 2011, 07:01 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1 Build 1640 (RC 3)

http://down1.opensightsoftware.com/liveupd..._1640_Setup.exe
http://down1.opensightsoftware.com/liveupd...40_Portable.exe

Fixed > Local Browser > File List > Dragging a file within the file list and dropping on another file resulted in the file being moved to the parent folder.
Fixed > Local Browser > File List > Drag / Drop displayed the no drop mouse cursor but still attempted to perform the drop operation.
Fixed > Server > FTP > Active mode (PORT) > Port mode operations would often fail with a timeout. This was caused by a defect in the listening routine.
Fixed > Server > Secure FTP > The SSL/TLS handshake could sometimes fail due to a defect in the handshake routine.
Fixed > File Transfer Status-bar > Remaining, Elapsed, Queue > The Text formatting routine failed to separate the minutes from the seconds.
Fixed > File Transfers > The "Filename case conversion" function was returning an invalid result causing file transfers to fail.
Added > The Key Manager (for managing X.509 certificates / RSA Keys / DSA keys) is now directly accessible via the main menu under Sites.

Additional Information:
I changed the default floating-point unit in this release, All releases for the last 10 years disabled floating point exception errors and this was not the intended behavior. It's possible that this change might introduce some unexpected crashes, this will allow us to address any FPU issues, rather than keeping them hidden.

Known bugs:
I would like to think all known issues have been resolved. If I'm mistake or you find a bug please let me know, I will be forever in your debt smile.gif
TScybpsych
post Sep 5 2011, 11:21 PM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1 Build 1642 (RC 3)

http://down1.opensightsoftware.com/liveupd..._1642_Setup.exe
http://down1.opensightsoftware.com/liveupd...42_Portable.exe

Improved user interface when using the non-standard screen DPI. Several user interface elements weren't scaled correctly.
Improved the hint windows, they now use the windows visual style.
Fixed > Server > Resolve hostname > When connecting to a site via its hostname, if the user presses abort and then tries to connect to another site via a hostname, FlashFXP would crash.
Fixed > Server > Tree-View > When several folders are deleted from the server by another user and you refresh the content in FlashFXP, only the first deleted folder is removed from the tree-view.
Fixed > Server > Extended attributes > The UID, GID, and sticky bits weren't calculated correctly. (bug #550)
Fixed > Site Manager > Changing the "connection type" of a site profile could result in the active tab being changed to one of the other tabs. bug #552)
Fixed > SFTP > Login > When connecting to a site profile with an empty username and a private key set the login prompt was not shown. (bug #553)
stasio
post Sep 6 2011, 10:04 AM

10k Club
********
All Stars
18,503 posts

Joined: Oct 2007
From: P.Jaya
FlashFXP 4.1 Build 1643 (RC 3)

http://down1.opensightsoftware.com/liveupd..._1643_Setup.exe
http://down1.opensightsoftware.com/liveupd...43_Portable.exe

-Due to an unexpected compatibility issue Drag / Drop was non-functional in the previous release.


This post has been edited by stasio: Sep 6 2011, 12:12 PM
TScybpsych
post Sep 12 2011, 05:28 AM

---------------------
*********
All Stars
65,264 posts

Joined: Jan 2003
FlashFXP 4.1 Build 1645 (RC 3)

http://down1.opensightsoftware.com/liveupd..._1645_Setup.exe
http://down1.opensightsoftware.com/liveupd...45_Portable.exe

Changed the behavior for the rename action used in file transfer rules. The new behavior is to rename the destination file using the following syntax {filename}{timestamp}{.ext}, if FlashFXP is unable to rename the destination file the file being transferred will be renamed {filename}(#){.ext} where # is the next available number. In previous versions this feature only renamed the file being transferred using the {filename}(#){.ext} syntax.
Fixed an issue where disconnecting from a server during a file transfer resulted in the queue automatically resuming on the next manual connect.
Fixed rare crash during an update check when FlashFXP is closed while the check is in progress.
Several changes were made to the way toolbar backgrounds are rendered to resolve some compatibility issues, Please let us know if you experience any problems.
Updated OpenSSL to 1.0.0e


16 Pages < 1 2 3 4 5 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0257sec    0.38    5 queries    GZIP Disabled
Time is now: 29th November 2025 - 08:16 AM