ermm... if you are trying to use RSD Lite to flash a new firmware into your phone, you should be getting into bootloader mode before connecting it to your pc.... i had not used the motorola software update portal to do this before.

can u download from this then
just follow the guide to upgrade to 2.2.
dunt miss any step.
take this

http://www.mediafire.com/?s3uc8cb782w1oue

extract to someplace

then follow this
HOW TO UPGRADE WITH FULL SBF FILE
__________________________________________________

1. Download FULL SBF, Install USB Driver and RSD Lite
- USB Driver for Windows 32 bit, for 64 bit.
- RSD Lite 4.9

2. Create a Backup:
- Create backup of sms, apps+settings, etc, so it can be restored on this new official Froyo

3. Erase Data and Cache [MUST DO! SERIOUSLY, YOU MUST DO THIS!]
- Turn of your phone,
- Press and hold Power+Vol.down until android logo appears
- If you previously on Eclair, press right bottom corner of the screen to get the menu
- If you previously on other Froyo build, press Vol.up+Vol.Down simultaneously to get the menu
- Navigation button: Vol.up and Vol.down | Action button: Eclair, use the touchscreen. For Froyo, use power button.
- Do Wipe Data, wait until it's done
- Then Do Wipe Cache, wait until it's done
- Choose Reboot system, BUT IMMEDIATELY JUST AFTER YOU choose reboot, press and HOLD Vol.Up for 5 seconds and release
- You are now on bootloader

4. Flashing the SBF File to Your Device:
- Open RSD Lite 4.9 from your computer desktop shortcut, then click browse button [...] to open the SBF file
downloaded files usually is .7z or .rar, PLEASE extract it first to open
if your computer can't open SBF files, try to shorten the SBF filename, and don't put it on folder, try put it on outside like D:\ or E:\
- Connect USB cable to your device, if it's the first time to flash SBF file, WAIT untill all the drivers properly configured
- In RSD Lite 4.9 window will recognize your device, it will says connected. If don't, try to pull cable and plug it again until it's connected.
- Click Start button, wait the process, it takes 7-10 minutes
- When all is done and ready, RSD Lite status will shows "Finished" and Result="PASS"
- You are on official South East Asia Froyo 2.2.2!!

ENJOY your new MOTODEFY.
Your DEFY deserve Froyo, even Gingerbread

---

Added on June 29, 2011, 9:06 amTS should update front page with latest guide and latest link to required files.

Bro flash miui,stock rom  is loser.enjoy ur defy to fullest like us. Unleased the power..

its chinese signed but of course its will start in English..
but should be able to run in chinese.

but we flashing it only as a base before switch to MIUI rite 

nope.. no need root.
coz we will start root it on 2.2
lets make u safely switch to 2.2 1st.

then all wil be too easy after that.
10 more minutes to go

i see..

Pls make sure ur downloaded SBF is 160MB+ when in .zip
and exactly 360MB when extracted to .sbf

other than this, u might stuck at M logo or endless looping cycle

Should be alright,is it the official SEA15(Malaysia)/SEA18(Singapore) sbf you downloaded?

IMPORTANT: MUST wipe data/cache before flashing the sbf with RSDlite!!!

got two version wat.
i tried both.. working
http://forum.xda-developers.com/showthread.php?t=1093352

size should be like this

to optimize power use.

1. set wifi policy to never off
2. set mobile network to 2G only
3. download SetVsel and try lowered ur voltage to lower value

---

Added on June 30, 2011, 3:53 pm

SG set.
ask ken6268