i'm a noob here 2... i can't seem to get OC my C2D E6300(1.86GHz) on Gigabyte GA-P965-DS4... i'm using iCute 480W twin fan standard rated PSU... not enough power ar...?
INTEL OVERCLOCKING THREAD, TIPS,Q n A, Results...Great For NueBis
|
|
  Sep 24 2006, 10:31 AM
Return to original view | Post
#1
|
 
Senior Member
4,139 posts Joined: Sep 2006 From: Internet  
|
|
Quote|
|
|
|
|
Sep 25 2006, 03:31 PM
Return to original view | Post
#2
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(nelza_ax @ Sep 24 2006, 12:23 PM) u r using icute psu err... as is said... i'm juz a noob...   anything wrong wif iCute...? i borrow it from my boss... until i can find a realpower 500W PSU from either CM or Enermax... |
|
|
 Sep 30 2006, 07:45 PM
Return to original view | Post
#3
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(hihihehe @ Sep 30 2006, 02:45 PM) i have try it de.n found out tht i cant oc my this branded pc.thr don have any option to me adjust the fsb Branded Set PC like HP, Dell etc... can't OC 1... even their gaming lines... they either factory OC or stock... they are set in factory settings only... tat's y pro user nvr use factory machines... factory casing maybe lar... cuz wanna cut cost...   |
|
|
Nov 2 2006, 01:50 PM
Return to original view | Post
#4
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
Any1 oc this board wif any compatible processors...? my signature show my current clock... not sure bout the highest safe clock yet...
 |
|
|
Nov 4 2006, 05:46 PM
Return to original view | Post
#5
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(xyngfei @ Nov 2 2006, 03:14 PM) bro, how much + where u get this mobo? During PCfair at All IT booth... the biggest Gigabyte banner place... RM670... i got offer cuz i sapu their C2D, 7600GS and the mobo... |
|
|
Nov 4 2006, 05:54 PM
Return to original view | Post
#6
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(remysix @ Nov 4 2006, 12:32 PM) ram set at 2x multiplier... when increasing clock... voltage also must increase... therefore creating more heat... so it's best to know bout the highest clock at stable cond and temp... on stock hardware...and disable all those EIST, Virtual blabla, etc why dun u set ur vcore to 1.35v and then push the clock to 400x7=2.8g...see how, run dual spi 32m, and if ok, up the clock summore to 3ghz...then run spi 32m again... btw, r u on stock hsf and make sure to put a fan blowing the NB...it WILL be really hot good luck edited: oh ic the title mentioned stock hsf... i'll be changing the NB ompound and i usually leave my casing open and let the wind blow from my standing fan... mine everything in stock... juz changed the clock... mem multiplyer set to auto and so r the voltages... i not spending any money for better sinks and fans cuz i think not worth yet... my GC no fan so heat build up inside... i put the CM 8cm fan to blow my GC which is suppose to blow the HDD... and y must disable those EIST and virtual bla bla bla...?  BTW... my temp in HW monitor shows 26 when starting and 35 when i restart after playing games... currently Dawn of War Dark Crusade... heavy 1... This post has been edited by t3chn0m4nc3r: Nov 4 2006, 06:02 PM |
|
|
|
|
|
Nov 5 2006, 12:24 PM
Return to original view | Post
#7
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(remysix @ Nov 4 2006, 10:59 PM) use CoreTemp or TAT...that would really shows the core temperature...ET5 might show 5-10c lower... damn... Wat the hell intel use to read the temp of their own tech... so lame...  |
|
|
Nov 6 2006, 07:07 PM
Return to original view | Post
#8
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(cracksys @ Nov 5 2006, 12:42 PM) I saw an article somewhere that said software voltage reader arent reliable if you're going to do serious OC ... yeah... i agree... wanna get 1 of those also... but not so important rite...?it is advised to go for manual voltage checking (that technician cool gadget) oopss .. sory for the out-of-topic reply ... well, what done is done  |
|
|
Nov 6 2006, 07:19 PM
Return to original view | Post
#9
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(gengstapo @ Nov 5 2006, 12:30 AM) use the bundle software la d00d easytune is juz not as easy as i want... i prefer OC in Bios...the EasyTune5 haizz.. -.- BTW... i wanna know bout the safest clock in stock heatsink and fan... not wat tool to OC ler... This post has been edited by t3chn0m4nc3r: Nov 6 2006, 08:50 PM |
|
|
Nov 6 2006, 07:20 PM
Return to original view | Post
#10
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(remysix @ Nov 4 2006, 10:59 PM) use CoreTemp or TAT...that would really shows the core temperature...ET5 might show 5-10c lower... ok... current temp wif core temp...fresh start: 59 after heavy load: 65 so... is tat bad...?  |
|
|
 Nov 7 2006, 07:15 PM
Return to original view | Post
#11
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
auto voltage can't stabilize my system lar... i'll try adjusting them myself...
 |
|
|
Nov 7 2006, 07:16 PM
Return to original view | Post
#12
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(MaGicDust @ Nov 7 2006, 08:32 AM) Maybe I can help you out a bit as I'm using the same spec, DS4 (Burned a hole in my pocket!!!) + e6300 Week 29... tat's impressive...I guess my proc is surprisingly good at OCing... I'm doing 450x7 at stock vCore (1.225V) set in BIOS even though CPU-Z and Everest shows it's only at (1.19ishV)... gmch:+0.1 pcie:+0.0 fsb:+0.1 Using PC6400 OCZ Platinum 4-5-4-15 @ 2.1V and Arctic Freezer Pro 7 (Using SmartFan, didn't on full blast cause too noisy) My idle temp is at 45-48C... Full load on both cores using intel TAT is 62C Max... This is 24/7 in air-con room... Btw, does upping PCI-E voltage help to oc CPU or GPU? |
|
|
Nov 9 2006, 11:10 AM
Return to original view | Post
#13
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(ddww @ Nov 8 2006, 08:31 PM) is tat the way it is? i though its a typo!? u know 1.325v and 1.225v. 1.225V Vcore is indeed most impressive part of ur rig... but it's not stock... damn i wish mine can... u change any cooling system...? thermal paste, HSF, etc...?This post has been edited by t3chn0m4nc3r: Nov 9 2006, 11:11 AM |
|
|
|
|
|
Nov 10 2006, 08:17 PM
Return to original view | Post
#14
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(MaGicDust @ Nov 9 2006, 10:40 PM) Hehehe... Sorry guys for the confusion... I know that 1.225V is not stock... But that's why it is automatically set by the mobo, as far as for mine... Sorry hm... weird... i use stock HSF but vcore still stock... nvr undervolt... BTW my clock has changed... autoconfig voltage wif F6 bios...  Btw, I'm curious that does ur DS4 set the voltage to 1.225 at default? I'm using Arctic Cooling Freezer 7 Pro, lapped with Arctic Cooling MX1 thermal paste which came with the cooler... Maybe that helps a little. Btw, the bottom fins of the HSF is also angled a bit towards the mobo, might help a little to blow air towards the mofsets...  |
|
|
 Nov 13 2006, 01:57 PM
Return to original view | Post
#15
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(MaGicDust @ Nov 10 2006, 10:54 PM) Yeah, I'm running F6 all this while... Left it at Auto, so it is set at 1.225V and it's very stable, loaded both cores with TAT for 24hrs... So what is your vCore atm? The F6 BIOS automatically undervolt the proc? no wor... surprisingly it's at normal vCore which is 1.325V... will do further testing... Gigabyte juz gets better and better than ever... |
|
|
 Nov 18 2006, 07:05 PM
Return to original view | Post
#16
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(MaGicDust @ Nov 13 2006, 08:24 PM) Very strange then... Don't know why my mobo undervolt my processor at default :S. But never mind lar... At least it's good in a way, can reduce heat careful though... it might not be real time... i would try other software if i were u to confirm the vCore... if it's real, u r 1 of the luckiest OC'er...   i checked mine wif CPU-Z and mine is at 1.325... |
|
|
Nov 22 2006, 12:22 PM
Return to original view | Post
#17
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
still can't get higher yet... should I reduce my RAM multiplier...?
|
|
|
Nov 22 2006, 09:46 PM
Return to original view | Post
#18
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(dualshock @ Nov 22 2006, 01:31 PM) my rig is currenty running at 2.66 (380x7) at 1.300v. i can go higher to 2.8 but not stable...tried once to push it to 410x7 but can't boot into windows... using auto... it's 2.5 i guess... u...? BTW DQ6 can reduce 0.025v from ur vCore...? btw, i'm using DQ6 F7 BIOS... not planning to go any further than 2.66 as i'm using this 24/7... techno, u using wat multiplier for your ram? 2.5? or 2?  |
|
|
Nov 24 2006, 10:46 AM
Return to original view | Post
#19
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
QUOTE(Jusoh @ Nov 24 2006, 12:12 AM) Orang AMD silent ke skrang....kena penangan CORE DUO...hehehe...i'm proud even just use ageing tech northwood... this is Intel thread lar brother... |
|
|
Nov 24 2006, 11:07 AM
Return to original view | Post
#20
|
|
Senior Member
4,139 posts Joined: Sep 2006 From: Internet
|
okok... new problem...
my F.E.A.R test... majority graphic settings set to max... CPU 2.5(358x7) RAM 895MHz(2.5xmultiplier) 17% 25-45 FPs 83% above 45 FPs CPU 2.5(358x7) RAM 1074MHz(3xmultiplayer) 20% 25-45 FPs 80% 45FPs CPU 2.835(405x7) RAM 810MHz(2xmultiplier) 24% 25-45 FPs 76% above 45 FPs Coretemp CPU temp: 62-66 in the temp log... sometimes while playing FEAR my temp also can go down to 63... 66 only when loading... My GC bottleneck my performance or memang like tat...? I don dare to OC my GC cuz no fan although I put 2 casing fan to blow it... temp according to my Forceware is 48... |
|
Topic ClosedOptions
|
| Change to: |  0.0494sec
 0.78
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 03:52 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.