Outline ·
[ Standard ] ·
Linear+
INTEL OVERCLOCKING THREAD, TIPS,Q n A, Results...Great For NueBis
|
mfcm
|
 Jan 9 2007, 11:19 PM
|
|
QUOTE(mikelanding @ Jan 9 2007, 11:10 PM) Ultra-120 is better than XP-120...at least for my own experience.. using XP-120, my load temp around 65C (Orthos). With Ultra-120, my load temp around 56-57C... I not sure other...result may varies... yeah..erm izzit still can get any decreasement of temp if we using high blow cfm fan?jus wondering if put on high cfm fan on xp120 can reduce abit temp..izzit?  |
|
|
|
|
|
mfcm
|
Jan 9 2007, 11:29 PM
|
|
|
QUOTE(mikelanding @ Jan 9 2007, 11:21 PM) err..I tried with those 105cfm fan (damn noisy) on XP-120 before....not much improvement... 1-3C drops but the noise is unbearable for me...  owh  then in term of dropping the temp ,lapping the xp120 back oso wont reduce much ek?hmm  hope i can make it decrease the temp with high cfm fan,lapping back,top blow hole n air flow in the casing..  |
|
|
|
|
|
mfcm
|
Jan 10 2007, 12:52 AM
|
|
|
QUOTE(norazwan79 @ Jan 10 2007, 12:46 AM) and the result is...... only drop 1c.  owh gosh..mean its wont help for it |
|
|
|
|
|
mfcm
|
Jan 10 2007, 11:24 PM
|
|
|
QUOTE(norazwan79 @ Jan 10 2007, 11:09 PM) cancel buying ultra120 or noctua (need to wait). bought thermaltake bigtyphoon vx from zamree7. tomorow i will do short review.  waaa..then seem i oso need to change it lor |
|
|
|
|
|
mfcm
|
Jan 11 2007, 07:46 PM
|
|
|
QUOTE(t3chn0m4nc3r @ Jan 11 2007, 07:18 PM) err... Aurora 3D mobo...? wow...  can give the model number...? at 1st im oso shocked  but try google it  |
|
|
|
|
|
mfcm
|
Feb 2 2007, 02:39 PM
|
|
|
QUOTE(gengstapo @ Feb 2 2007, 08:32 AM) should be below than 60c la better the cooler the better  huhu mine oredi 88c so better wait for hsf since its hot wit the stock cooler |
|
|
|
|
|
mfcm
|
Feb 12 2007, 02:57 AM
|
|
|
i dun think when u get better psu u will reduce ur vcore..perhaps im rite ..since if thinkin better psu will reduce vcore then can take 1kW psu will reduce vcore so can push higher but seem other user of btter psu face same like 1.6v to push 4.00ghz..due to ur vcore mite high myb u need to tweak more ur setting or mite be u got not too great stepping proc for oc |
|
|
|
|
|
mfcm
|
Mar 4 2007, 11:17 PM
|
|
|
soory guy..wanna ask abit..i prime my rig e6600 to 3.6ghz at 1.46v...both using sp2004 and orthos..noth result 8hours pass..but when i wanna use another application suddenly its restart why ek..izzit coz not stable?but its oredi prime blend for orthos and cpu prime b4 dat using sp2004..got any idea?thx |
|
|
|
|
|
mfcm
|
Jul 31 2007, 04:56 PM
|
|
|
QUOTE(rockmaniac85 @ Jul 31 2007, 04:46 PM) it supports 667MHz rams, coz, initially, all processor don't have fsb that exceeds 333MHz, rite? we are the one who oc'ed it to more than that.. that's where the problem lies.. the lowest divider *IS* indeed 1:1 in Gigabyte 965P-DS3 mobo.. thanx for clarifying it kucingfight i think my proc reached the wall larr, coz when i put 500MHz fsb, i already set the rams timings to 5-5-5-15... sigh, i think i'll work on this more this weekend.. im kinda busy now.. so how max stable urs proc doin now?primin orthos for how long?try burn in ur proc n ram 1st..perhaps later u can try higher  |
|
|
|
|
|
mfcm
|
Jul 31 2007, 10:58 PM
|
|
|
QUOTE(rockmaniac85 @ Jul 31 2007, 07:17 PM) it boots on 500fsb, but orthos not stable 3 sec and i got a hardware rounding error. my HSF is intel stock wan.  planning to change, at the moment eyeing the TT Big Typhoon VX. Apart from TT, what other HSF is good ah? max stable not sure, probably 430x7 lar, orthos 6 hrs lebey no prob.. when i kick my fsb to 450, orthos will get the 3sec hardware rounding error.. Think my temperature is the cause ah? PS: edited, Vcore at 1.87V mmg gila lar yeah its better to change to 3rd party hsf when on oc..geminiII,noctuacan consider as gud hsf..u can try up abit ur vcore then increase abit ur fsb..if 500 cant prime stable, try lower its abit..myb 495..oc need try n error to find ur stable fsb ..gud luck |
|
|
|
|
|
mfcm
|
Aug 12 2007, 07:39 PM
|
|
|
QUOTE(gengstapo @ Aug 12 2007, 06:47 PM) unless u overclock it later.. haha  haha sifoo yeah u buy better ram lor..now ddr2 price damn cheap..who know later u mite change to quad  |
|
|
|
|
|
mfcm
|
Aug 12 2007, 09:24 PM
|
|
|
QUOTE(rockmaniac85 @ Aug 12 2007, 08:15 PM) damn cheap meh? price increased already lor.. yeah for me its damn cheap..dunno if others think its still higher..coz last time i bought my tracer pc2 8000 almost cost 1k for 2gb kit..now tracer pc2 8500 u can get around 6++ |
|
|
|
|
|
mfcm
|
Aug 15 2007, 05:52 AM
|
|
|
QUOTE(t3chn0m4nc3r @ Aug 15 2007, 12:39 AM) hehe... oops... my bad... but i don think 1.85V is enough to get 5GHz stable using air cooling... haha i not jus enough..but will spoil ur proc if using air cooling |
|
|
|
|
|
mfcm
|
Aug 16 2007, 11:27 PM
|
|
|
QUOTE(likito @ Aug 16 2007, 06:44 PM) wah! thanks for the info . thermalright chipset cooler good or not ? u can try check in cooling section..theres reviews made for it |
|
|
|
|
|
mfcm
|
Aug 16 2007, 11:36 PM
|
|
|
QUOTE(t3chn0m4nc3r @ Aug 16 2007, 11:28 PM) y not try Gigabyte G-Power Pro...? it's lite and silent...  erk..i tot likito askin for chipset cooler..not proc cooler |
|
|
|
|
|
mfcm
|
Oct 9 2007, 01:33 AM
|
|
|
QUOTE(AceCombat @ Oct 8 2007, 09:21 AM) my rig no more available haha yeah been legendary rig oredi..fast fast build new one ace..hehe then can lend him ur ram later |
|
|
|
|
|
mfcm
|
Mar 1 2008, 12:51 PM
|
|
|
QUOTE(OC4/3 @ Feb 29 2008, 12:54 PM) IT is quite easy to oc e8xxx up to 3.6ghz.I try E8200,oc to 3.2ghz spi is 14.2!  Even my E6550@504x7 sucide also only 14.45 and i do some tweak ! yeah it easy to do 3.6 even on stock..but the prob will start when doin >4ghz |
|
|
|
|
|
mfcm
|
Mar 4 2008, 11:28 PM
|
|
|
QUOTE(Izwan898 @ Mar 4 2008, 09:32 PM) Guys, need some help here...OCed my E8400 to 465X8 fsb with vcore of 1.25v stable...but when increased to 470, orthos will fail in minutes...already raised my mch n fsb voltage both to +0.1v....also loosen my rams to 5-5-5-12 with 2.1v vdimm....anything else I'm missing here? can gv more details?such ur vcore set in bios,idle n load..vNB..how long ur prime 465x8?priority 8? |
|
|
|
|
|
mfcm
|
Mar 4 2008, 11:46 PM
|
|
|
QUOTE(kianwee @ Mar 4 2008, 11:32 PM) Mine can reach 420x9 everything at stock. Anything higher than that is unstable. whose said can stable?  i can do mine 450x8.5 stable prime for 12hours on stock vcore 1.184v..n stable oso for 445x9 1.24v and 4.3ghz 1.37v
Added on March 4, 2008, 11:48 pmQUOTE(Izwan898 @ Mar 4 2008, 11:44 PM) Vcore in bios forgot already...haha...will check back after this...according to CpuZ, idle @ 1.232 and load @ 1.200....vNB +0.1 in bios....primed 465x8 for 6 hours stable...yeah priority 8...will get back to u guys with the vcore set in bios...  for the NB +0.1 mean how ur current vNB?ur stock 1.33v?if yes try to up ur vNB abit.. This post has been edited by mfcm: Mar 4 2008, 11:50 PM |
|
|
|
|
|
mfcm
|
Mar 5 2008, 12:02 AM
|
|
|
QUOTE(Izwan898 @ Mar 4 2008, 11:56 PM) How to check the stock vNB bro? u got any display in ur bios about current vNB? beside the +0.1?coz not too familiar with gigabyte bios  |
|
|
|
|
Quote
0.0655sec
0.37
7 queries
GZIP Disabled