HI bro i getting my Q6600 3.6GHZ is 50% overclock with 24/7 ver stable

I share with you.

This is my tweak and setting .

My system:
Q6600
Asus Maximus II Formula Motherboard
4gb Corsair Dominator 1066
ATI Radeon HD 5870 (asus)
Cooler Master realpower 550w PS
Bigwater 760i to cold down the cpu.




Processor Q6600-3.6Ghz
Ai Overclock Tuner Manual
OC From CPU Level Up Auto
Ratio CMOS Setting 9
FSB Frequency 400
CPU Clock Skew Auto
NB Clock Skew Auto
FSB Strap to North Bridge Auto
DRAM Frequency DDR2-1066Mhz
DRAM CLK Skew on Channel A1 Auto
DRAM CLK Skew on Channel A2 Auto
DRAM CLK Skew on Channel B1 Auto
DRAM CLK Skew on Channel B2 Auto
DRAM Timing Control Manual
CAS# Latency 5
DRAM RAS# to CAS# Delay 5
DRAM RAS# Precharge 5
DRAM RAS# Activate to Precharge 15
RAS# to RAS# Delay Auto
Row Refresh Recycle Time Auto
Write Recovery Time Auto
Read to Precharge Time Auto
Read to Write Delay (S/D) Auto
Write to Read Delay (S) Auto
Write to Read Delay (D) Auto
Read to Read Delay (S) Auto
Read to Read Delay (D) Auto
Write to Write Delay (S) Auto
Write to Write Delay (D) Auto
Write to PRE Delay Auto
Read to PRE Delay Auto
PRE to PRE Delay: Auto
All PRE to ACT Delay Auto
All PRE to REF Delay Auto
DRAM Static Read Control Auto
DRAM Read Training Auto
MEM. OC Charger Auto
Ai Clock Twister Auto
Ai Transaction Booster Auto
Common Performance Level Auto
Pull-in of CHA PH1 Auto
Pull-in of CHA PH2 Auto
Pull-in of CHA PH3 Auto
Pull-in of CHB PH1 Auto
Pull-in of CHB PH2 Auto
Pull-in of CHB PH3 Auto
PCIE Frequency 100
CPU Voltage 1.35
CPU PLL Voltage 1.553
FSB Termination Voltage 1.1265
DRAM Voltage 2.10
North Bridge Voltage 1.1265
South Bridge 1.5 Voltage 1.50
South Bridge 1.1 Voltage: 1.12
CPU GTL Reference (0): +10mv
CPU GTL Reference (1) +40mv
CPU GTL Reference (2) +10mv
CPU GTL Reference (3) +40mv
NB GTL Reference Auto
DDR2 ChA Reference Voltage Auto
DDR2 ChB Reference Voltage Auto
North Bridge DDR Reference Auto
Ratio CMOS Setting 9
C1E Support: Disabled
Max CPUID Value Limit Disabled
Intel Virtualization Tech Disabled
CPU TM Function Disabled
Execute Disable Bit Disabled
Load-Line Calibration Enabled
CPU Spread Spectrum Disabled
PCIE Spread Spectrum Disabled

Hi bro my advice is you get a better motherboard . I sure you will get more than 3ghz .

This is the link where is have post my stress test and also temperature.

http://forum.lowyat.net/topic/1049742/+120

Intel mobo is more to stability and so far no much review on intel mobo on overcloking 1 .

Better get asus , dfi or evga . You can more tweaking .

HI bro read this link :-

http://www.bit-tech.net/hardware/cpus/2009...s-core-i5-750/1

It show you how to overlock to 4.0ghz