u mean the bundled oc software???
try oc from the bios.its more fun and hardcore.try up ur vcore by .05 at a time.

yeesss... i oc from the bios.. thats why i disabled d.o.t..... but still can adjust voltage.. its read only..

from what i understand;
oc from window, enabled d.o.t.
oc from bios, disabled d.o.t.

d.o.t. is msi software to oc from windows. but in this software got option to increase voltage.
should i oc from windows then?

well if u enable d.o.t can u change the voltage thru the bios???

no i cant.

try pm 'sis' acecombat about it.
after all i use abit not msi.i dont think i can help u further.

i think u should use bios to oc, able to change the voltage, as if you use software, i think it will only overclock as it boots into windows.

hmm its ok. tq for ur concern. still waiting reply from her though.

i am oc from bios, still cant adjust the voltage. there must be some setting that i missed.

Guys, I'm abit frustrated on my oc. Rite now I'm doing 3.35GHz @ 1.45 vcore, already tried lower vcore, not stable. This is the minimum vcore for my oc and still failed occt after abt 5 hours, lower setting failed in minutes. Does my ram have to do abt my stability issues, or I simply got a bad batch? Fenin2...

erm...hard to say...

but then seriously speaking 4x1gb is quite hard to OC compared to 2x1gb...

i think u can try with 2x1gb first n see if its really the 4x1gb is holding u back loh...

if its failed at lower vcore pump more vcore into it.
like my 2180 when i oc it to 3ghz it only need 1.365 but when i oc it to 3.2ghz it needs 1.425.from 2 to 3ghz just need extra 0.02v but another 200mhz increase require another 0.06v.

diff. processor give diff. result
usually i find any few Oc review around web then try to achieve that kind of result..
only then we know how good our processor is..

Stress-testing 3.4ghz @ 1.46 unstable, guess I'm stuck @ 3.35ghz. Just my luck

finally i manage to figure out how to adjust voltage for my setup
manage to oc up to 445x8 at 1.256 vcore, and 2.1 for vdimm, and end up unstable.
orthos for 7 second got error and ibt only pass 1 out of 5.

any idea how to stable it? do i need to increase vcore more? i see my vcore quiet low compare to others

hey hw long can this cpu last if i overclock it correctly until a suitable speed?

E2160 1.8Ghz to 3.2Ghz
8x multiplier, FSB 400Mhz

Hi guys.. me just newb to oc thing.. i just do a bit oc on my rig.. so i wanna you'll look and give some tips about my oc'ing..huhu



My Rig Spec

CPU : Intel 630 Pentium 4 HT 3.00GHz (stock cooler)
Ram : 2gb Kingston KVR 800Mhz
Mobo : Gigabyte GA-G31M-S2L
Vga : ATi Radeon HD3870
PSU : PowerLogic 450w
HDD : WD sata 80gb 7200rpm

cant be expected

anyone already brought E5200?
how izzit?
post some print screen for OC pls
thank

there are some result in hardware section already....

add more vcore

*edited.
posted in the wrong section.


This post has been edited by VT-Ten: Sep 29 2008, 03:07 PM