haha blame the mobo char

then why u buy not enough reading ?

oic.. means u read alot?? then show me the topic of it (about this mobo cant detect this seagate HDD while oc) , i'll thanks u if u can show me the topic of it , if not then be shame on urself too, not jz me..

bro...what kind of psu u use??
make sure its true power....

true = 300 , max = 600 .. this is what the seller in lowyat had told me.. he said many psu write 450/500/ more is the max power only... true power maybe too low.. so he bring me go in abit his shop & show me the casing which is wif simple design but inside is ok 1 la.. hav a 12cm fan 1.. if any1 know.. this i think suppose can get from m-link.

so how now? my psu ok? actually i dunno the seller telling is true onot la.. coz i am not a pro in this kinda things.. thats y i need help here

bro... try find another true power psu..... like acbel,thermaltake,fortron.... got so many choice at bulk order lor...
better take that have lifetime warranty lor....

for dual core better use orthos

hi guys, i manage to oc my PentiumD 945 to 4.2ghz (248x17) on stock vcore 1.275 v(orthos prime stable)....wanna ask ur opinions here, what is the furthest i can up on the vcore to run daily ?

Edit: cpu temp: 36c on load
hsf: Zalman 9500LED
Mobo: Abit AW8-Max


This post has been edited by seanl: Nov 2 2006, 03:18 AM

Wah got nice o/c result from the Pentium D 945. Your proc is able to go higher i think.

Any1 oc this board wif any compatible processors...? my signature show my current clock... not sure bout the highest safe clock yet...

bro, how much + where u get this mobo?

erm... i think my psu hav atleast 1 year warranty gua.. after that then only i'll get 1. then the old 1 for standby/backup oyea.. wanna tell u guys.. the ram i using if in bios +0.2v to run at 4-4-4-12 , the ram seems too hot for me... so is better put back normal & run at 5-5-5-15 , actually i cant tell the differents of speed.. but i can tell wif my hand of the heat from the ram..

i learn , i teach or can say as not teach but sum exp la.. like this only we all can get better ma... share out exp , make life easier..

i think so too, but i wanna ask around before i start adjusting the vcore....targeting 4.5ghz before i try other cooler.....

You have to try it out yourself, different hardwares will give different results

can share the screenie plzz?

C2D doesnt benifit much from a tighter memory timing compare to AMD..
I would advice you to throw the NO brand PSU... PSU is like the heart of a human body... you decide important or not...

Since you OC a better heart is crucial to pump more stable and enough blood to the system..

Try to get a 450V and above true power PSu.. Super good brands are PCPC, Seasonic, Delta, Tagan and FSP... good brands : antec, Cooler master (true power series), Aopen (700W) and Topower.

sure, i'll post some later.

wahh.. kinda heartbroken here
CM & AOpen PSU can entered the list, while Enermax is nowhere

can enter the list? i dun see is inside wor.. or is it i miss understand sumthing here?? btw.. i think my pc cant do well oc now. is hot.. kinda feel "pain heart" when i feel the heat from it...

I also o'clock this baby to 400*9 =3600..

But i face the HDD prob too previously...The HDD timeout and cannot shut down.

Yesterday i foud out that i didn't move the HDD jumper......Now malas to try already.... After HDD timeout, will create a lot of error event in OS...Tired to do that format and reinstall things again...

So in sumarry, this E6600 can o'clock well... It can do >400FSB with no prob...

I think the most importance things for o'clock is:

Press Ctrl +F1 in MAIN MENU and try this settings..

CPU Clock Ratio : 9X
CPU Host clock control : Enabled
CPU Host Freq : 400
PCI Express Feq :100
CIA2 disabled
System memory multiplier: 2.0
Memory freq: 800
DRAM timing :Manual
SYS volt control : manual
DIM over volt control:+0.2V
PCI-E "" "" "" :Normal
FSB "" "" "" :Normal
MCH "" "" "" :+0.2V

CPU volt control: Normal
Normal cpu Vcore: 1.4V

Ram timing depend on your ram. Some said the BIOS got some prob with D9 RAM...(Cannot o'clock >1000)

Above setting will make your E6600 run in 400FSB

This post has been edited by Ree73: Nov 3 2006, 08:46 AM

ENERMAX >80% efficient... Almost all released model >80%

now heard that the FMA II price drop to RM250++ only!!!