Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 WTA : Terrance House Reno Quotation, This price is reasonable or PARANG? :D

views
     
TSmegatron007
post Apr 10 2011, 03:20 PM, updated 15y ago

Look at all my stars!!
*******
Senior Member
4,000 posts

Joined: Jul 2007
From: SomeWhereNearU
1 MAIN ENTRANCE SLIDING DOOR AREA
1.1 To remove main entrance area existing aluminium sliding door panel with debris works RM600.00
1.2 To brick's new side wall on existing sliding door panel area for new window's panel with R.C linter panel ontop each window RM2,280.00
1.3 To supply and install new casement aluminium window panel ( 4 set ) with sizes of 2' X 6 clear glass ( 6mm ) thickness RM2,400.00
1.4 Touch-up works for existing flooring tiles and side wall painting works RM600.00

2 LIVING HALL AREA
2.1 To supply and install plaster ceiling light though panel and plain board on side area only surrounding square type RM3,200.00
2.2 To paint new plaster ceiling area using ICI maxilite white colour for base coated painting works RM500.00
2.3 To supply new wiring works for plaster ceiling fluorecent light point with casing and different switches control consule type RM800.00
2.4 To supply new wiring works for plaster ceiling down light point with casing and different switches control consule type RM400.00
2.5 To relocate existing 13amp plug point with T.V point to center area consule with painting touch-up RM500.00
2.6 To relocate existing air conditioner wiring works and plumbing works complete with new 2 horse power cooper piping 1 set consule RM1,350.00

3 KITCHEN AREA
3.1 To bricks new wall to divide dining hall and wet kitchen full height with plastering works ( brc net ) and painting works complete with RM1,680.00
side PVC edging panel and new RC linter panel on new door entrance
3.2 To supply and install new wall tiles continuos to exisiting wall and new bricks wall area using existing same tiles ( full height to ceiling ) RM1,280.00
3.3 To supply and install tempered glass with 12mm thickness for sliding door panel complete with ceiling type Li-lon heavy duty RM2,680.00
stainless steel railing type
3.4 To supply and install new sliding window on kitchen area using 6mm clear glass and tea colour frame ( 4'X6' ) 1 set RM980.00
3.5 To supply and install cast iron plate on existing iron grille door panel full 1 set and new doorlockset RM680.00
3.6 To remove existing wet kitchen area flooring and reinforced new concrete floor leveling RM680.00
3.7 To supply and install wet kitchen floor leveling complete with flooring tiles following existing floor tile's 1'X2' RM1,355.00
3.8 To redo wet kitchen area plaster ceiling with new painting works RM700.00
3.9 To reinforced concrete with Y10 ( F ) steel for L/shape counter table top with 2'X2' polisihing tiles with counter base skirting curving RM4,320.00
3.10 Wiring works on external beam area for spot light point 1 nos. RM180.00
3.11 Wiring works on new kitchen area for ( rice cooker , water boiler and etc. ) 4nos. 13amp plug point RM480.00

4 MASTER BEDROOM AREA
4.1 To supply and install new brick's wall 2' X 12' complete with plastering works and painting works , with pvc side edging panel RM1,130.00
4.2 To supply and install new partition panel using gypsum board with cast steel frame works with plastering and painting works for RM2,250.00
built-in wardrobe ( sketching as per discussion )
4.3 Wiring works to relocate existing 13amp plug point with additional on side table area complete with plastering and painting works RM350.00
4.4 Wiring works to supply new power point with switches on bathroom entrance area for W/C set water flusher RM450.00
4.5 To relocate shower rain panel complete with tiling works replace RM400.00
4.6 To supply and install new hand shower panel with new 2 way stopcock plumbing works for hot and cold water inlet c/w tiling works RM1,385.00
4.7 Wiring works for bathroom wall mounted eksos fan point complete with an hole with tiling works touch-up RM380.00
4.8 Wiring works for bathroom wall mirrow panel fluorecent light point complete with tiling works touch-up RM250.00
4.9 To supply and install solid plywood panel with shelac works on bathroom ba-sink counter top base area RM550.00
4.10 Wiring works for built-in wardrobe area down light point or fluorecent light point RM160.00
4.11 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.5 horse power on master bedroom area RM850.00
4.12 To supply and install new plaster ceiling works on window panel area light though panel with pelmet cover 1 set straight RM1,265.00
4.13 Wiring works for plaster ceiling fluorecent light point RM200.00
4.14 Wiring works for court yard area 13amp plug point consule 2nos. RM380.00
4.15 Wiring works for court yard area wall light point consule 2nos. RM180.00
4.16 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.0 horse power on bedroom 1 area RM650.00
4.17 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.0 horse power on bedroom 2 area RM680.00

5 TOP FLOOR CINEMA ROOM
5.1 To supply and install new door frame and using existing solid door panel complete with new hole and side panel touch-up , RM1,680.00
new RC linter panel on door top area
5.2 To bricks new wall panel to divide study room and cinema room complete with wall plastering and painting works with pvc side edging panel RM1,880.00
complete with timbering wooden parquet touch-up and new side skirting ( with polishing works and shelac )
5.3 To remove existing study room door frame and supply new door frame with new decoration solid ply wood door and door lockset RM2,380.00
5.4 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.5 horse power on cinema room RM850.00
5.5 To supply and install new air conditioner cooper piping with plumbing outlet point for 1.0 horse power on study room with direct RM1,350.00
NCD fuse box ( with new 60amp switch fuse )
5.6 Wiring works for 13amp plug point consule type on cinema room's direct NCD fuse box ( with new 60amp switch fuse ) 3nos. RM480.00

6 CARPORCH AREA
6.1 Wiring works for pillar area wall light point on both side 2 set RM220.00
6.2 Wiring works for beam area spot light point on top area 1nos RM180.00
6.3 Wiring works for 13amp plug point ( for vacumm or function use ) 1nos. RM220.00

7 PAINTING WORKS
7.1 To supply ICI DULUX for interior wall using easy clean with 5 colour tone mixture , 4 layer coated RM2,500.00
7.2 To supply ICI DULUX for exterior wall using weather shield with 2 colour tone mixture , 4 layer coated RM2,900.00
7.3 To supply ICI DULUX for interior and exterior iron grille and wooden door and frame using hi-gloss and shelac paint 2 layer coated RM1,355.00


rclxub.gif just abit work = RM100k liao : (

This post has been edited by megatron007: Apr 10 2011, 03:21 PM
Jo_da48
post Apr 10 2011, 03:53 PM

Regular
******
Senior Member
1,529 posts

Joined: Feb 2011
From: PJ


My suggest to you if possiable split those electric / Painting / concreate wor.
example: Painting work, are you beenc calc double as each listed item that have a paint cost.
Wiring work...how much they acutally charge for 13am? 220 for one or 380 for 2???

Long list and confuse...and you may also been double charge but not sure ll

For item 7, since like already a cost for a terassa house in / out work cost, hence why you still need to pay for other sub item???
PangurBan
post Apr 10 2011, 05:02 PM

On my way
****
Senior Member
584 posts

Joined: Nov 2008
From: Ulaan Baatar, Mongolia


wiring and electrical works all kena parang liao. BIG parang.

This post has been edited by PangurBan: Apr 10 2011, 05:03 PM
sonerin
post Apr 10 2011, 08:50 PM

Look at all my stars!!
*******
Senior Member
8,739 posts

Joined: Aug 2009
Seems like a lot of things to do 100k seem ok. Perhaps can reduce few thounsand
HungSEE
post Apr 11 2011, 12:42 AM

New Member
*
Newbie
4 posts

Joined: Feb 2011
QUOTE(megatron007 @ Apr 10 2011, 03:20 PM)
1 MAIN ENTRANCE SLIDING DOOR AREA
1.1 To remove main entrance area existing aluminium sliding door panel with debris works RM600.00
1.2 To brick's new side wall on existing sliding door panel area for new window's panel with R.C linter panel ontop each window  RM2,280.00
1.3 To supply and install new casement aluminium window panel ( 4 set ) with sizes of 2' X 6 clear glass ( 6mm ) thickness RM2,400.00
1.4 Touch-up works for existing flooring tiles and side wall painting works  RM600.00
 
2 LIVING HALL AREA 
2.1 To supply and install plaster ceiling light though panel and plain board on side area only surrounding square type  RM3,200.00
2.2 To paint new plaster ceiling area using ICI maxilite white colour for base coated painting works RM500.00
2.3 To supply new wiring works for plaster ceiling fluorecent light point with casing and different switches control consule type  RM800.00
2.4 To supply new wiring works for plaster ceiling down light point with casing and different switches control consule type  RM400.00
2.5 To relocate existing 13amp plug point with T.V point to center area consule with painting touch-up RM500.00
2.6 To relocate existing air conditioner wiring works and plumbing works complete with new 2 horse power cooper piping 1 set consule RM1,350.00
 
3 KITCHEN AREA
3.1 To bricks new wall to divide dining hall and wet kitchen full height with plastering works ( brc net ) and painting works complete with  RM1,680.00
side PVC edging panel and new RC linter panel on new door entrance 
3.2 To supply and install new wall tiles continuos to exisiting wall and new bricks wall area using existing same tiles ( full height to ceiling ) RM1,280.00
3.3 To supply and install tempered glass with 12mm thickness for sliding door panel complete with ceiling type Li-lon heavy duty  RM2,680.00
stainless steel railing type 
3.4 To supply and install new sliding window on kitchen area using 6mm clear glass and tea colour frame ( 4'X6' ) 1 set  RM980.00
3.5 To supply and install cast iron plate on existing iron grille door panel full 1 set and new doorlockset  RM680.00
3.6 To remove existing wet kitchen area flooring and reinforced new concrete floor leveling  RM680.00
3.7 To supply and install wet kitchen floor leveling complete with flooring tiles following existing floor tile's 1'X2'  RM1,355.00
3.8 To redo wet kitchen area plaster ceiling with new painting works RM700.00
3.9 To reinforced concrete with Y10 ( F ) steel for L/shape counter table top with 2'X2' polisihing tiles with counter base skirting curving  RM4,320.00
3.10 Wiring works on external beam area for spot light point 1 nos. RM180.00
3.11 Wiring works on new kitchen area for ( rice cooker , water boiler and etc. ) 4nos. 13amp plug point  RM480.00
 
4 MASTER BEDROOM AREA 
4.1 To supply and install new brick's wall 2' X 12' complete with plastering works and painting works , with pvc side edging panel  RM1,130.00
4.2 To supply and install new partition panel using gypsum board with cast steel frame works with plastering and painting works for  RM2,250.00
built-in wardrobe ( sketching as per discussion )
4.3 Wiring works to relocate existing 13amp plug point with additional on side table area complete with plastering and painting works RM350.00
4.4 Wiring works to supply new power point with switches on bathroom entrance area for W/C set water flusher  RM450.00
4.5 To relocate shower rain panel complete with tiling works replace  RM400.00
4.6 To supply and install new hand shower panel with new 2 way stopcock plumbing works for hot and cold water inlet c/w tiling works RM1,385.00
4.7 Wiring works for bathroom wall mounted eksos fan point complete with an hole with tiling works touch-up RM380.00
4.8 Wiring works for bathroom wall mirrow panel fluorecent light point complete with tiling works touch-up RM250.00
4.9 To supply and install solid plywood panel with shelac works on bathroom ba-sink counter top base area  RM550.00
4.10 Wiring works for built-in wardrobe area down light point or fluorecent light point  RM160.00
4.11 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.5 horse power on master bedroom area RM850.00
4.12 To supply and install new plaster ceiling works on window panel area light though panel with pelmet cover 1 set straight  RM1,265.00
4.13 Wiring works for plaster ceiling fluorecent light point  RM200.00
4.14 Wiring works for court yard area 13amp plug point consule 2nos. RM380.00
4.15 Wiring works for court yard area wall light point consule 2nos. RM180.00
4.16 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.0 horse power on bedroom 1 area RM650.00
4.17 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.0 horse power on bedroom 2 area RM680.00

5 TOP FLOOR CINEMA ROOM 
5.1 To supply and install new door frame and using existing solid door panel complete with new hole and side panel touch-up , RM1,680.00
new RC linter panel on door top area
5.2 To bricks new wall panel to divide study room and cinema room complete with wall plastering and painting works with pvc side edging panel RM1,880.00
complete with timbering wooden parquet touch-up and new side skirting ( with polishing works and shelac )
5.3 To remove existing study room door frame and supply new door frame with new decoration solid ply wood door and door lockset  RM2,380.00
5.4 To relocate and supply air conditioner cooper piping with plumbing outlet point for 1.5 horse power on cinema room  RM850.00
5.5 To supply and install new air conditioner cooper piping with plumbing outlet point for 1.0 horse power on study room with direct RM1,350.00
NCD fuse box ( with new 60amp switch fuse )
5.6 Wiring works for 13amp plug point consule type on cinema room's direct NCD fuse box ( with new 60amp switch fuse ) 3nos. RM480.00
 
6 CARPORCH AREA 
6.1 Wiring works for pillar area wall light point on both side 2 set RM220.00
6.2 Wiring works for beam area spot light point on top area 1nos  RM180.00
6.3 Wiring works for 13amp plug point ( for vacumm or function use ) 1nos. RM220.00
 
7 PAINTING WORKS 
7.1 To supply ICI DULUX for interior wall using easy clean with 5 colour tone mixture , 4 layer coated  RM2,500.00
7.2 To supply ICI DULUX for exterior wall using weather shield with 2 colour tone mixture , 4 layer coated  RM2,900.00
7.3 To supply ICI DULUX for interior and exterior iron grille and wooden door and frame using hi-gloss and shelac paint 2 layer coated RM1,355.00
rclxub.gif  just abit work = RM100k liao : (
*
Not to expensive, but got 15 to 20k margin


AzimAdhwa
post Apr 12 2011, 04:45 AM

Getting Started
**
Junior Member
84 posts

Joined: Jan 2008


Agreed
blackjack88
post Nov 17 2011, 06:02 PM

New Member
*
Junior Member
6 posts

Joined: May 2010
From: KL


i think this quotation ++ the consultant fees.
gracegrace
post Nov 21 2011, 03:52 PM

New Member
*
Newbie
2 posts

Joined: Nov 2011


from my experience sometimes the contractor doesnt do most of the work and get a 3rd party to do it. this is where the price got hike up well well!

 

Change to:
| Lo-Fi Version
0.0160sec    0.66    5 queries    GZIP Disabled
Time is now: 10th December 2025 - 04:16 AM