does anyone have the problems as mine?

anyone from selayang install unifi already ?

yes installed on 20march at tmn selayang jaya
and got 3 times failure already..currently service still down since sunday..call centre said they need to fix a problem at their end and no idea when it can be done

finally! i am also experiencing service down since sunday. i called the center but they say the earliest the technician can come is on friday. they said is their problem is it?

Yes, I'm staying bukit idaman.

So far so good.

wtf, me from selayang as well, call them up wanna ask the technician come install early but say no slot, no slot.. i subscribe in march but installation is on june...

Siebel,
Have u try to PM rattan in this forum?

btw guys, what DNS are u using?
my DNS : 202.188.0.133 202.188.1.5

cheers!

Hi sifus,

If I got more than 5 devices to connect (wired), the RG only has 4 ports to connect to, can I connect the 5th device to the BTU directly?

I tried connecting my PC to BTU directly but it does not work, can't get online.

Please advise.

Thanks.

Get a switch... voila! more ports to plug stuff into

Had my unifi installed on Sunday. Spent half a day the next day to digest and understand rizvanrp's blog, and changed the DIR-615 G2 (firmware 7.09) to VLAN bridge mode to connect to my existing WRT54GL.

I decided to try on method 2 without downgrading my firmware to 7.05, and it's working perfectly

thanks for the guide rizvanrp !

Of course not. The BTU is just like a bridge. Dialer in still in that RG. Why don't you connect via wireless.

Installed VIP5 sunday. So far ok but I got 2 questions:

1. Why is the speed using LAN cable is lower than using wifi? When I connect directly to modem via LAN cable, it register 100Mbps and when wifi it register higher upto 130MBps. Is it due to cable limitation? I always cable will always be faster.

2. The technician mentioned that if the fiber cable has too many bends (ie. more than 3), the speed will be slower or might face connectivity problem. I can't get the answer whether is it true in the internet. Anyone got any idea?

Fred

I'm using 8.8.8.8 and 8.8.4.4
Google DNS.

yea i did, 1 thing he suggest is cancel thru tm and reapply thru him.. lol didnt know we took the same school bus when i was in primary school. hahahah

I just wrote them a mail asking for rebate, they inform they will only calculate the rebate after my case ID is closed. wonder if they calculate start from when I lodge the report or they already know something's wrong at their end at a certain date.

---

Added on April 20, 2011, 1:39 pmI put google dns in the router

This post has been edited by xavier7: Apr 20 2011, 01:39 PM

Received DNS from ISP,
and i got this:

just called them again..problem not fixed at their server yet..screw them!!

1. The difference is that wifi speed can vary.. sometimes it may fluctuate to < 100 Mbps depending on your location or how much data you are transferring or how many devices connected or your neighbour's wifi interfering.

2. It is true that you should not bend fiber too much because it increases signal loss. However I'm not sure of the spec of the cables TM provides, but generally the bend radius should be at least a few cm.
http://en.wikipedia.org/wiki/Optical_fiber

Preferably wired 'cause more stable and more constant speed.

+1 and QFT.