Hi. I received the quotation from mypainter cost me rm10k for entire house
18x65, really expensive.. anyone can recommend me a good painter in Puchong area please. Many thanks
Labour cost for painting
Labour cost for painting
|
|
Dec 21 2011, 12:19 PM
Return to original view | Post
#1
|
![]()
Junior Member
26 posts Joined: Apr 2007 From: Subang Jaya |
Hi. I received the quotation from mypainter cost me rm10k for entire house
18x65, really expensive.. anyone can recommend me a good painter in Puchong area please. Many thanks |
|
|
|
|
|
Dec 22 2011, 11:20 AM
Return to original view | Post
#2
|
![]()
Junior Member
26 posts Joined: Apr 2007 From: Subang Jaya |
Here is quotation from mypainter:
QUOTE House Painting Double Storey Link 5,320.00 5,320.00 - To waterjet using 160 bar power jet for infected area only - To apply 1 layer of Nippon 5500 wall sealer to all interior , exterior walls & ceilings - To apply 2 layer of Matex ceiling white for all interior & exterior ceilings - To apply 2 layer of Nippon spotless to all interior walls - To apply 2 layer of Nippon weatherbond to all exterior walls House Painting - To Fully skim and sand Interior walls 2,500.00 2,500.00 - To apply two layer of Nippon Joint Compound and Sand to the finest with hand Colours : Limited to 5 x Interior Colours : Limited to 3 x Exterior To apply 2 layer of Nippon 9000 to door frames 11 35.00 385.00 To apply 2 layer of Nippon 9000 to single leaf door 6 70.00 420.00 To apply 2 layer of Varnish to Main Door 1 120.00 120.00 To apply 2 layer of Nippon 9000 gloss to all exterior gutters/fascia 250.00 250.00 board To apply 2 layer of Nippon 9000 to all Interior & Exterior grills 850.00 850.00 To apply 2 layer of Nippon 9000 gloss to staircase handle 200.00 200.00 Thank you for choosing Mypainter Painting Services. Total RM 10,045.00 This post has been edited by chenglong: Dec 22 2011, 11:21 AM |
|
|
Dec 22 2011, 11:52 AM
Return to original view | Post
#3
|
![]()
Junior Member
26 posts Joined: Apr 2007 From: Subang Jaya |
i plan to do painting for all the girll, door and windows by myself..
weikee, any suggestion ? |
|
|
Dec 22 2011, 12:16 PM
Return to original view | Post
#4
|
![]()
Junior Member
26 posts Joined: Apr 2007 From: Subang Jaya |
QUOTE(weikee @ Dec 22 2011, 12:04 PM) Gloss paint (for Wood and Metal) are much harder to tackle than wall paint. I'll advice you let them do it. That is from my personal experience. I may request to quote workmanship and paint separately, think provide paint by myself.If you want to try, apply metal primer for grills, and wood primer for wood before apply actual paint coat. or else ask other painter to quote me the same job scope@materials and then compare it.. Added on December 22, 2011, 12:18 pmweikee, I do plastering and sanding by myself...then ask them apply joint compound to walls...may save some $$ This post has been edited by chenglong: Dec 22 2011, 12:18 PM |
| Change to: | 0.0183sec
0.63
7 queries
GZIP Disabled
Time is now: 7th December 2025 - 01:24 PM |