http://www.cooling-masters.com/articles-33-0.html

Pump comparison: AquaXtreme 150Z-DC12, AquaXtreme 50Z-DC12, DangerDen D5/Laing D5, Dangerden CSP-MAG, Asetek Waterchill 12V and Laing DDC.

itz in ze french zo uze ze bablefishoz

bay reservoirs tend to have leaks from the barbs. worst is HDPE res, youll never know how tight to screw it in cuz the threads can expand.

silicone sealant will work fine. just use the white type, not the translucent one.

hello peeps...

sigh.. did an overhaul of the loop yesterday. disassemble everything and gave it a good wash. then reassembled back everything today.

wanted to make the loop shorter. placed the pump on top of the psu.. it was a tight fit secured in place by the double heatercore pushing against it. then as i was mounting the rad, screwing in the fans... one screw was just too tight. unscrewed it then gave it a slight shove to the side and tigthen it down. it went it all the way with a 'klack' sound. didnt think much of it cuz its usually the sound of the rad and fan 'locking in place'.

next filled up the loop then started the pump. weird cuz the eheim cant seem to pump anything at all. it was pumping air all the time. lay the casing flat this time and the pump was working. so i continued to fill the loop with more battery water. after the second filling the pump still failed to push the water through the loop!! retested with the casing on its side again and then i found water dripping from the radiator!!!

fuxx... disassemble everything again and its confirmed.. that one screw broke one of the radiator's pipe.

lesson learnt: i shouldnt have screwed more when the hole was getting tigther.

double heatercore for sale anyone?? im on aircooling now... chapalang alu heatsink with 70mm fan

if the water is too hot, itll get evaporated too.

side note im selling off my Eheim 1048, Swiftech HDPE 5.25" bay reservoir, Danger Den Maze 3 S462 and 'Tygon like' tubings at http://forum.lowyat.net/topic/383686