Lookout Free Acct - Locate and Scream only. Need premium to have the Lock and Wipe.

And if using any battery saving app, need to exclude Lookout coz it need an active 3G / network connection. Else it won't send any trigger reply unless the phone is active.

This post has been edited by Bugeca: Apr 1 2011, 04:03 PM

Is it true that it can't do 3G video call? What a waste.

SGS can do 3G viceo call even on eclair.

Actually we cannot rely on Lookout Mobile but we can plan preventive. Lock phone using password, pin or pattern is the first line of defence. It the phone lost, the data is more important than the phone right. We did not want our contacts, pictures or video expose.

For me locate and scream is useful to find your phone when you misplace it like the HTC ads. hahahah (useful if you want to track your spouse much better than Friend Finder, or to "buzz" like Yahoo Messenger).

Lock and wipe is to secure your privacy. If the thief flash the ROM and using download mode, then our info is lost also except in SD.

Another note, make sure our CSC is correct coz even the thief change the SIM card, the phone still able to auto configure the APN and initiate the 3g network.

This post has been edited by Bugeca: Apr 2 2011, 11:13 AM

Just asking.... is anybody here having no problem accessing samfirmware website?

This post has been edited by Bugeca: Apr 3 2011, 08:38 PM

http://insanity.rollus.net/index.php?dir=rom/modems/

Change your DNS ip to these IP (one IP will do actually), it belongs to OpenDNS

208.67.222.222
208.67.220.220

Change on the router part.

SGS can reached 52 degree, that is my record. As long it is not shutting down then it is not an issue. The phone will auto shutdown if it reached certain temperature which is believe is more than 52.

Battery temp.

Where did you run the test? Sony roadshow or centre?

OIC. I may not able to attend the roadshow so Sony Centre is the best place for me to test out this phone. Maybe have to wait a lil bit longer if Maxis has the exclusive right on the phone. Need to see it real performance, Maxis always display dummy sets

Dial *#0*#

Try the Horizontal Calibration under Display settings.

Do you rooted your phone? We can try another method before sending to service centre.

Edit:

When you run the diagnostic test. There is some sort of graphic which looks like a compass. There is a sentence "Need for calibration" inside the circle rite? To calibrate that, just move ur phone in "8" figure movement and a complete horizontal roll. It will take about 2 or 3 complete roll and "8" to calibrate that.

This post has been edited by Bugeca: Apr 6 2011, 07:57 PM

I have another method and much more simpler (improvise from that method; can be found on XDA). To sum up...

1. Navigate to /data/system folder
2. Rename or delete ms3c_yamaha.cfg
3. Run the Horizontal Calibration from the Display settings
4. Reboot

Try it out see if it can reset your sensor again.

Some of 'em managed to settle it by deleting the file mentioned earlier.

If you do not have Root Explorer, you can use terminal to access the directory



This post has been edited by Bugeca: Apr 6 2011, 09:16 PM

Yes you can run the Yamaha calibration setup.

Glad that you fixed the issue. Save the time and cost to send for repair.

Can you open the file? See what is inside it.

Looks like the Yamaha sensor file. If you wanna try, u can rename it first, then run the calibration and reboot. It should create another file after that.

Did you accidentally unchecked "Use data packet" in the Settings?