Note: Recently i notice the mushroomed of P&P retrokit on Reflector headlight. I believe the Ops knockdown on Sept 2005 coming back real soon if is continue spreading. Please re-consider the obtrusive and blinding glare on opposite driver are suffering before you retrofit any HID into your beloved vehicle.Source from MOT:
ROAD HAZARDS: Tighten rules on HID lights By : S.M. MOHAMED IDRIS for CAP
THE Consumers Association of Penang (CAP) congratulates the Road Transport Department for its success in curbing the illegal use of xenon HID (high intensity discharge) lights on vehicles. Xenon lights are a proven hazard to Malaysian motorists.
Improperly retrofitted ones serve no purpose in our climatic conditions other than to blind other motorists with their glare. Motorists here who install these lights have been directly and indirectly responsible for accidents and the deaths of other motorists.
The RTD has acted stringently against motorists who retrofit HID lights, as provided for in Section 99(2)(ii) of the Rules for Motorised Vehicles (Construction and Use) 1959. In 2007, the government even contemplated banning xenon HID lights altogether. Unfortunately, this did not materialise. Instead, the government has acceded to European Union standards by being signatory to the World Forum for Harmonisation of Motor Vehicle Regulations (WP29).
Under this agreement, our own Rules for Motorised Vehicles (Construction and Use) 1959 were amended in 2007 to allow for the importation of cars with OEM (original equipment manufacturer) xenon HID lights in compliance with United Nations Economic Commission for Europe (UNECE) Regulations.
These imported vehicles may be equipped with self-levelling and self-cleaning mechanisms and even adaptive technology for their OEM xenon HID lights (in order to minimise obtrusive and blinding glare to other motorists). Locally retrofitted ones from car accessory shops are usually bare-fitted ones with no supporting safety technology and with beams improperly aligned for safe use. These are the ones that pose a danger to other motorists.Below are the projector tuned for HID use only. Will not produce unwanted glare that blinding others motorists.
Item(s): Bi-Xenon "MiniLite" HID Projector (Factory tuned to use with HID Bulbs, no glare above cutoff, it's the best selling projector in USA with different trade-name.)
Package includes: Bi-Xenon MiniLite Projector (MH1) + Mini Gatling Shroud + 4300k HID Bulbs + HID 35watt Ballast. (can use back existing HID 35watt ballast if you own any)
Price: (Kindly PM for serious buyer only)
Dealing method: DIY or Retrofit option available
Location of seller:KLProfessional Retrofit services is available should you require it! It can be DIY for most H4, H7 & 9006 fitting including P. Waja.
PM me your car model & year for retrofit cost.Do you want this glare behind of you every time you on the road??
Retrofitted Sample, snap with point & shoot camera, 25mm, NO - editMiniLite Projector Glares very minimal, as little as OEM glare » Click to show Spoiler - click again to hide... «
Distance 100ft from wall, how far your eyes can see? » Click to show Spoiler - click again to hide... «
The light beam still visible even the floor are wet
Beam Pattern [RHD]» Click to show Spoiler - click again to hide... «
Hyundai Elantra» Click to show Spoiler - click again to hide... «
Honda Accord 2010» Click to show Spoiler - click again to hide... «
Kia Picanto» Click to show Spoiler - click again to hide... «
Kia Spectra 5» Click to show Spoiler - click again to hide... «
Pajero Evo» Click to show Spoiler - click again to hide... «
Toyota Vios J» Click to show Spoiler - click again to hide... «
Honda Accord 7th Generation» Click to show Spoiler - click again to hide... «
Suzuki Swift» Click to show Spoiler - click again to hide... «
» Click to show Spoiler - click again to hide... «
Prime Exora Projector!» Click to show Spoiler - click again to hide... «
Minilite Projector with Mini-Cooper (MC-R) shroud
MC-R shroud closer look
Pilot light on
HID on
» Click to show Spoiler - click again to hide... «
Altis 9th Gen» Click to show Spoiler - click again to hide... «
» Click to show Spoiler - click again to hide... «
Nissan Sentra B14» Click to show Spoiler - click again to hide... «
Minilite Projector with Mini-Gatling shroud
Original (Left), Retrofitted Projector (Right)
Both with MiniLite Projector
Kia Forte» Click to show Spoiler - click again to hide... «
OEM look's
Adjustable light level in any angle via stock adjuster
» Click to show Spoiler - click again to hide... «
Proton Persona» Click to show Spoiler - click again to hide... «
Honda City G4» Click to show Spoiler - click again to hide... «
Honda City G5» Click to show Spoiler - click again to hide... «
Ford Fiesta» Click to show Spoiler - click again to hide... «
Nissan Latio» Click to show Spoiler - click again to hide... «
Proton Wira» Click to show Spoiler - click again to hide... «
Perodua Myvi» Click to show Spoiler - click again to hide... «
FX-R projector looks similar with Minilite projector with shroud attached.
Proton Saga BLM SE» Click to show Spoiler - click again to hide... «
Honda CRV» Click to show Spoiler - click again to hide... «
Toyota RAV4» Click to show Spoiler - click again to hide... «
My Humble Feedback» Click to show Spoiler - click again to hide... «
QUOTE(altecphoto @ Apr 17 2011, 04:11 AM)
Sorry for the late review, after so long I finally found a suitable place to take photo of the output. The projector cut-off is really clean and sharp, it has a nice blue cutoff too.  Using 4300k bulbs from trxx7989 paired together with some china 35w ballasts, visible distance at least 30m and above. My beams are aimed quite low. If adjusted higher, should be able to touch 40m and above

Â
QUOTE(mengsta @ Jun 19 2011, 11:06 PM)
Bro trxx7989, thanks for getting the retrofit on my car. I cannot thank you enough for your help and patience. Guys, this guy is genuine and very passionate about his work. Rest assured you'll be a happy retrofitted customer
QUOTE(kirakun @ Jul 3 2011, 02:03 PM)
Well just dealt with the seller, Jimmy on Monday and as agreed I banked in on Tuesday and item arrived on Wednesday. I have to say nice dealing with you and looked forward to deal with u again in the future. Keep up the good work. Sorry for the late feedback as I was busy these days.
QUOTE(mark kuang @ Jul 11 2011, 01:25 AM)
hi bro!!!! n all guys!!!! fx-r bi xenon projector r best solution for u all if want to retro into ur car...they r bright, sharp cut off n light spread r wide..u can see it clearly...i already retro to my RAV4...DIY..it's make more safety for those who r lot driving at nite especially me...i almost drive 40 km per day at nite...n i want to thanks to bro trxx7989 who sold to me fx-r..thanks a lot bro...n guys!!! this guys r very good doing his work...u will be happy if u retro with he....
QUOTE(gregy @ Sep 23 2011, 10:25 AM)
Hi bro TRXX, thanks for taking the time to meet up the other day. I'm very pleased with your service and the product. Good luck!
QUOTE(torneo @ Sep 27 2011, 10:45 PM)
OK here's one for everyone! Â
Customer Service and Satisfaction I met up with Jimmy twice before i decide to go ahead and buy/install this projector on my car. Obviously it's not an easy decision cuz it ain't cheap... but considering the fact that the projector light throw with HID is fantastic - i went ahead and make appointment for the work. It's a 4.5 hours work in total from drive in and drive out of the shop but boy was I in for a surprise... the light output was seriously so good that i think i kinda look like a Cayman coming from really far! I'm not exaggerating cuz it's beautiful... was the money worth it? Hell yeah! Do you want to blind the shit out of oncoming cars with your little DIY HID on reflector housing? HELL NO!!  OK enough of verbatim on how satisfied i am.. let's talk quality. Â
Products The projectors and HID were imported but they are a well known brand for retrofitters - the quality doesnt really get better than this MiniLite.. Small yet powerful. The lens don't look like dingy 50rm lens.. like i said, think Cayman. THe ballast and the bulb is also amazing because when you buy "other" economical HID sets of 4300k, you'll actually be getting 6000k bulbs because for some unknown reason, they just don't make them in the right color/warmth. These 4300k and 5000k bulbs are genuinely the correct Kelvin used in Philips and other OEM kits. Â
Work Jimmy is quite a perfectionist. A lot of attention to detail and he take his own sweet time to align the projectors on the lamp housing to make sure it's correct (rotationally, vertically and horizontally). Sure nobody is perfect so there is a bit of misalignment when i drove it out at night but nothing a simple screw driver won't fix. I adjusted it myself and voila - perfect. I saw a little moist in my headlamp post rain yesterday and he offered to remove and re-seal the headlamp at no cost.  Thanks Jimmy for the wonderful work. I know LYN folks are lucky to have you around.. and drivers on the road are grateful for preventing glaring HID Reflectors blinding the crap out of them. Cheers buddy

 Btw i know i owe you some photos but i've been busy and will be traveling for work.. will get it posted here as soon as i can.
QUOTE(P_0661 @ Sep 30 2011, 10:38 AM)
sorry for the late feedback. im a bit bz ths week. this minilite projector has good useful width, along with sharpness, has good color, and good foreground intensity. really help when driving at nite, im enjoy it of course!Â

  here some shots i took (using samsung camera phone) for appearance and beam output [attachmentid=2460498] original-looks-like without ccfl attach. me like it!Â

  [attachmentid=2460499] beam output at abt 50ft distance frm the wall. the wall is not wide enough to cover the output beam. [attachmentid=2460500] hi-beam plays well its partÂ

  [attachmentid=2460501] the cut-off still form well at 100ft. the blue color band remain thin and doesn't get blur at distant [attachmentid=2460502] as u can see, the straight cutt-off makes the projector headlamp (with HID) better than with non-projector headlamp. with proper alignment, it will shining the road without glaring the opposite car. thanx to bro trxx7989 for retrofitting my swift! this seller is very friendly and take this job with a good care!Â
This post has been edited by trxx7989: Apr 24 2014, 11:36 PM