Head Unit : Alpine 9887 (before), Alpine 7990 F1 (after)
Processor : Alpine H701 + C701
Component : Dominations Rasing 2way + Dominations F50
Amplifier : Genesis Profile 4 Ultra ( will be upgrade later )
Woofer : Genesis 12" sub
Soundproof : StP



PLEASE DON'T USE THE AFTER MARKET DOOR PANEL CASING
IT IS VERY BAD EFFECT TO UR MID BASS ( NO LOW BASS, NO MID BASS AND HIGH MID DAMN NOISY )




IF YOU REALLY WANNA UPGRADE UR MYVI GOOD SOUNG QUALITY ,SPEND MORE MONEY TO ASK A GOOD INSTALLER MODIFY UR DOOR PANEL












FULL CAR SOUNDPROOF









Please kindly reply my topics, then i can share more picture

This post has been edited by mr.wong: Mar 20 2011, 11:12 PM

thx for sharing Myvi ICE installations! i want to see the rear trunk, need ideas for my car

i want to ask, based on the 1st picture, is the MDF rings screwed to the door metal, or attached to the plastic door panel (3rd pic)?

This post has been edited by taaron: Mar 20 2011, 11:53 PM

screw to the door trim



a-pillar work






GENESIS WOOFER




GENESIS PROFILE 4 ULTRA



TRUNK WORK WITH SIMPLE DESIGN

Nice work, well done. SUPPORT

not ngam la to pair the 7990 with 701..

wow!

i am speechless

mr wong, let say i do full soundproof on my car, can i eliminate rattling sound from door panel and dashboard?

Mr.wong sifu , when you show your car ??

did this wood ring most comon is water proof type ?




did you provide spare custom make pillar for COD sell ?

This post has been edited by zaxco: Mar 21 2011, 11:51 AM

i plan to mod the ICE for my car. budget around RM2k. Now everything is stock. but 1 thing, i don't want to sacrifice my boot space after i mod it. any idea on what should i do? any recommended shop?

state what car u drive then our community can help u to think about it....:>

i am asking here, of course its a Myvi la . its a stock Myvi SXi. any recommendation?

so means u cant ask anything if there's nobody post a myvi install thread?

i think u need a damn 9 mod door panel, so no need to add a sub.

This post has been edited by howiechoo: Mar 21 2011, 08:53 PM

I can try to custom made a 10" inch woofer box, just install in ur right hand side trunk area.
And u need to modify the myvi door panel as well as possible, becos ur door panel installatiion no good, sound also no good

10 sub for myvi enough? A lot people say 12 is better. Just came back from singapore wedding dinner. Missed the chance to visit Mr.Wong seafood

12 is better as it can dig lower hz easier...
but when boot space problem occur 10" is the option i think..
since mostly song's low fq range is reachable by 10", so it's a solution instead of sacrifice your boot space when boot space is really needed..
iirc mr.wong himself are changing to 10" from 12"... and he's driving myvi too

yup, u r right. My myvi also change to 10inch sub woofer.
( where is my recieved??!! )

wow bro, not yet sleep?
haha sabar~ will bring it along with next time go you there to "take" some CDs

please help me install the software into my PC.

oh ya mr. wong, wanna ask u normal bass boost in amp is 0-6-12db, set which better? & how to determine gain level?? tw

at his own workshop obviously

His workshop at gombak..send a pm la he will gip u direction!

normally i dun like to boost the bass, so i set it in 0dB

---

Added on March 25, 2011, 1:29 pm I am the installer, i install it and modify it by myself, and i also tuning by myself, wanna listen it ?

---

Added on March 25, 2011, 1:33 pmHuat ah ~~~~~ !!!



This post has been edited by mr.wong: Mar 25 2011, 01:33 PM

i also wanna visit can?

If you wanna come, i buy u breakfast, lunch and dinner also can

on la... next month coming to kl

huh ??? wat is say juz now ah ?

i come breakfast aso dun hv geh...hehe jk nia..

cos u r pretty girl, i feel shy mah!

oh so next round i wait for u bfast ar...

no pictures of the completed midbass?

How much would that setup cost?

WOndering how long does the process takes??? 2-3 days???

u got sell what u make/?

door panel modify need 2-3days

yup, i got sell wat i make

MrWong, quote for myvi installation + speakers , how much?
will use back ori HU 1st

Good work..Thanks for sharing...By the way, I a newbie at this forum, hope can learn more about ICEs from this forum...!!!

long time didn't come here。。。。。
welcome to join lowyat

i also just join lowyat...

ur picture is......denon......

wah mr. wong! really nice installation! wheres ur workshop?

hi bro, hw much to make tweeter holder like tis? pm pls.. thanks

hello mr wong if i want to moified my kelisa rear door panel how much the charge?i alreadr hav speaker mount there...

Hi, so u won't feel it disturbing, the speakers are just right beside ur feet?
o.o

disturbing as in...??
most of the factory speaker installed there

he is scared that when he gets out from the car he will accidentally 'terkick' the speakers... tats what the grills are for my fren

that, and when you put in hundreds, if not thousand of ringgit, your feet automatically would be careful too LOL!

and for passengers, you would lcly and tell them to be careful also XD

i just kick, who cares...

as in the bass kicks in....

i really have no idea what u r trying to say

This post has been edited by bafukie: Jul 10 2011, 10:29 AM

so wheres mr.wong's workshop? gombak seems near.

my shop address is No.4, Block B, Jalan 3/50, Off Jalan Gombak, Diamond Square, 53000, KL
014-3380702

better make appointment first before you wanna have a visit

Haha...so near my house! I live in Diamond Regency.

Felt like sharing my Myvi ICE setup too after having mine done almost 1/2 year ago..Any feedbacks are very much appreciated in terms of ways of improvement, design, etc..

Pics below (Click to enlarge)

My front stage, custom midbass mounting job, custom kickpanel midrange pods (currently midrange speakers are not used)


Power source, fuse, battery terminals


can't add anymore pics due to limitations in posting reply..need someone to reply then i can add on

This post has been edited by taaron: Sep 11 2011, 06:37 PM

Not bad bro

thx for replying..i want to further improve my setup in terms of sound, design, and speaker placements..please give comments for my setup

more pics below..

Rear boot area (overall)


Sub amp, fuse box for sub amp, front stage x-over


Front stage amps, subwoofer, power distro blocks, ground blocks

Your back board looks like it drooping a bit.
But I love the peerless!!!

Overall looks alright bro, BUT be careful of thieves. Better not park around Bandaran.
If you could match the speaker grills, would be +1 (but is small cosmetic improvement).

Here's another idea.
Change your backboard to 1 piece of plexi. Apply LED lights responsibly.
Can also plexi over your AudioSys amps if you want the boot space.

Good job.

This post has been edited by krayden: Sep 11 2011, 08:26 PM

Yea, looks like dropping, but actually the top board is slanting designed by the installer. The peerless is doing a great job at the moment, nice sub

not much can be done for a small boot space, hope can change car so that space isn't a limitation issue

the white thingy on u r dashboard, any difference in sound quality or just for decoration? btw sweet setup

the dashboard cover is very useful to tame my tweeters..before having the dashboard cover, my tweets are somewhat piercing..

taaron, so u've been to mr wong's workshop? what is his name the workshop? any banner or whatsoever?

don't get confused, I'm actually from Sabah..just happened to share my myvi setup in this correct thread too

btw, i think his workshop name is Nature audio, something like that, saw that somewhere in the web last time..pls correct me if i'm wrong

This post has been edited by taaron: Sep 13 2011, 01:36 PM

Bro, you are correct, the shop name is Nature Sound Design in Jalan Gombak.
i'm mr.wong, i lose my ID password, so now change new ID to NSDcaraudio

Where u see my installation picture last time? From my facebook page?

Mr Wong, are you IPOH MALI?

yup, i am from ipoh, but shop in KL

hello Mr. Wong....... do you have any experince about new myvi ...the one come with touch screen......i am wondering.... where is the noise come from...... the player need a processor ? or just change it to a better HU ?

I need some advice. Already change my ICE:

HU: Kenwood KDC U353R
Power Amp: Kenwood KAC M526 2 channel
Rear speaker: Kenwood 3 way KFC M1632A
Front speaker: JVC 2way CS-V427

Do i need pre-amp or any other component?

*Not planning to install woofer/subwoofer. Noe enough space

Wat kind of noise?
You will need processor only when you are going into sq.

---

Added on September 17, 2012, 2:12 amIf you wanna use more amp, then you will need preamp, but I hate preamp
As most of time it will do more harm than good... Better to upgrade to a 3xpreout hu

You can try active sub or shallow sub which only require small space...
But pls be noted that your current hu has only 1 preout, if u use it for 2ch
Then no more left for sub signal

This post has been edited by zacisme: Sep 17 2012, 02:12 AM

Noise-ziiiiiiiiiiiiiiiii from tweeter... the sound is quite ok without using amp.....but the subwoofer is working good uSing the same amp

yep.me too using 12" sw...but the box of the sw are too bug for me..only can face to bonet belakang..then when the boom sound play, the trunk door also play sound like vibrate from outside..ohh cannot show off lagi.. ...

I am planning to upgrade my myvi sound system.. i'm a noob.. any reliable shop i can go to?

Ea autowork. U can looking for howiechoo

Normally the vibrate sound came from car number plate, try stick the four edge firmly...
The better n proper way are soundproof the boot space

---

Added on October 7, 2012, 4:02 pmYou should list out a few shops, visit them, talk to d tuner, check their pricing, audit their car...
Before you decide which shop to go

This post has been edited by zacisme: Oct 7 2012, 04:02 PM

habis la howie usually no tiuz you wan and usually give expensive pricing (lol that other thread) and his inspira still stock

oooo...ok..later stick tight2 la all the edge of the plate...n then boom shakalaka...haha

Do not buy pre-amp... it alters the sound and making it sounds fake. A waste of money. If you are buying sound processor then ok.

Hello.. Guys and bros out there.. recommended ICE for stock myvi 1.5.. Wanna clear high quality sound system.. not boom boom boom type.. Sorry I noob.. btw, budget is around 2k?

Hi guys,

what brand n speaker size you would suggest? i wan my new myvi to give some boom boom sound. simple n best.

kindly advise.

thank you.